Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.7 LAccepted-AOC 02 JAMEEWAR COMPLEX RING ROAD HANUMAN NAGAR GONDIA MAHARASHTRA 441614 | GONDIA | MAHARASHTRA | 441614 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹7.2 L+₹40,512.50 (5.94%)Rejected-Finance 1001 63 SHALIMAR GARDEN ISMAILGANJ NEAR INDIRA NAGAR SECTOR 08 CROSSING LUCKNOW 226016 | LUCKNOW | UTTAR PRADESH | 226016 | L2 | Rejected-Finance Being not Lowest |
Tender Value
₹9.8 L
EMD Value
₹19,600
Closing Date
28 Jun 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) Manauri Prayagraj-212212
MANAURI PRAYAGRAJ-212212
WELCOME MAINT SERVICES (B/R WORKS) IN OLD PROJECT AREA AT AF STN MANAURI.
2022_MES_527775_1
9010/E8
Open Tender
Civil Works
Item Rate
270 days
Manauri
AS PER NIT OF TENDER
7 documents required · 7 mandatory
₹500
AGE (I) AF Manauri
₹19,600
Yes
19 Jul 2022
1 Jun 2022
29 Jun 2022
1 Jun 2022
28 Jun 2022
16 Jun 2022
Amount
Taking up or down steel tubing & connection 15mm bore including S&F GI tubing medium grade 15mm dia galvanised with all fittings & fixed including cutting chases for concealed water tubing and making good where necessary complete to wall, floor & ceilings complete all as specified & directed
Taking up or down steel tubing & connection 20mm bore including S&F GI tubing medium grade 20mm dia galvanised with all fittings & fixed including cutting chases for concealed water tubing and making good where necessary complete to wall, floor & ceilings complete all as specified & directed
Demolition of brick masonry built in cement mortar complete all as specified and directed
M & L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed
M & L for brick work with sub class 'B' bricks straight or curved on plan any radius as in half brick thick wall built in CM 1:4 complete all as specified and directed
Taking down cement plaster or cement lime plaster, any description from wall including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed
M & L for rendering 15mm thick in cement plaster 1:6 on other than fair faces of brickwork or concrete surface and finishing even and smooth without using extra cement all as specified and directed
M & L for rendering 15mm thick in cement plaster 1:4 on fair faces of brickwork or concrete surface alongwith WPC and finishing even and smooth without using extra cement all as specified and directed Note:-WPC shall be measured and paid separately as supply only under relevant item of this schedule.
Supply only integral water proofing compound
M & L for rendering 10mm thick in cement plaster 1:3 on ceiling surfaces and finished even and smooth without using extra cement all as specified and directed
Demolition of cement concrete of any description and in any position
M & L 40mm thick cement concrete type B-1 (1:2:4) using 20 mm graded stone aggregate as in floors including surface finished even and smooth with using extra cement complete and as direted Note :- Glass dividing strip shall be measured & paid separately as supply only.
Supply only glass dividing strips 38mm wide and 3mm thick and inserted in position all as specified
Dismantling stone slab and tiles of any description and thickness in floors, aprons etc laid bedding and pointed in any mortar complete
M & L 20mm thick granite work of any type in steps, jambs, pillars, windows cills, cooking platforms and like set in cement plaster 1:4 including pointing with white cement (1 : 2) using marble dust with admixture of pigment to match with shade of granite and rounding to edges of granite slab complete
M&L for rounding to edges of existing old stone slabs, such as steps, cooking platform and other similar situations complete.
M & L for machine cut kota stone slab flooring 20-25mm thick over 20mm thick screed bed in CM 1 : 4. laid and jointed with grey cement slurry and pointed in grey cement & pigment to match the shade of the slab incl rubbing and polishing complete all as specified and directed
Dismantling of floor, hearth or wall tiling including cement mortar bedding but not backing and rubbish off the premises complete all as specified
M & L for non skid coloured ceramic tiles in floor of any shade area of each tile exc 0.06 Sqm but not exc 0.11 sqm and 7 to 8mm thick in floors etc set and jointed in neat cement slurry and pointed with cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6
M & L for coloured glazed ceramic tiles of size 450 x 300 mm and 7 to 8mm thick in vertical surfaces set and jointed in neat cement slurry and pointed with cement to match over and including 10mm thick backing coat in CM 1:3
M & L for coloured vitrified ceramic tiles in floor of any shade area of each tile exc 0.16 Sqm but not exc 0.36 sqm in floors etch set and jointed in neat cement slurry and pointed with cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6
M & L for coloured vitrified ceramic tiles in verticle surfaces as in skirting of any shade area of each tile exc 0.16 Sqm but not exc 0.36 sqm set and jointed in neat cement slurry and pointed with cement to match over and including 10mm thick backing coat in CM 1:3
Taking down eaves gutters, rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks etc including cleaning or refixing or removal to stores complete
S & F 110mm PVC SWR pipes single socketed in any length laid in trenches or in floor & walls complete
S & F 75mm PVC SWR pipes single socketed in any length laid in trenches or in floor & walls complete
S & F in repair PVC (SWR) bends any radius 110mm dia
S & F in repair PVC (SWR) single T equal or unequal 110mm dia
S & F in repair PVC (SWR) bends any radius 75mm dia
S & F in repair PVC (SWR) single T equal or unequal 75mm dia
S & F in repair 75mm dia PVC floor trap including grating fixed in floor with cement complete
S & F in repairs vitreous china wash hand basin white flat back size 550 x 400mm incl angle iron brackets, CP waste coupling and 32mm dia waste pipe complete
S & F in repairs vitreous china squatting pan orissa pattern long pan size 580 x 440mm white with 'P' or 'S' trap, front or back inlet with murga bend and including provision of lime/cement concrete bedding complete
S & F in repairs vitreous china bowl type urinal, flat back of size 465 x 355 x 265mm, white with grating and union for discharge pipe complete
S & F in repairs for 15mm bore Pillar taps, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed. (Minimum weight 0.665 kg/ Each)
S & F in repairs cast copper alloy CP stop cock/angle cock of 15mm bore complete (Minimum weight 0.575 kg/ Each)
S & F in repairs 15mm bore, fancy type bib tap cast copper alloy, CP with crutch or butterfly handle complete (Minimum weight 0.575 kg/ Each)
S & F in repairs 15mm bore fancy type brass shower rose CP with arms complete
S & F in repairs stop cock (concealed type) chromium plated cast copper alloy screwed down high pressure with clutch or butterfly handle screwed both ends for iron pipes of for unions and fixed to 15mm bore complete (Minimum weight 0.575 kg/ Each)
S & F in repairs brass CP wall mixer for mixing hot & cold water with provision for over head shower with arm and long bend pipe and wall flanged screwed down for iron pipe of 15mm bore size complete
S & F in repairs gate valve 20mm bore, cast copper alloy, screwed down, high pressure, with crutch handle screwed both ends for iron pipe or for union all as specified and directed
S & F in repairs gate valve 15mm bore, cast copper alloy, screwed down, high pressure, with crutch handle screwed both ends for iron pipe or for union all as specified and directed
S & F in repairs 15mm bore bib tap, fancy type PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 105gms/ Each)
S & F in repairs 15mm bore pillar tap, fancy type PTMT screwed for iron pipe complete. (Minimum weight 120gms/ Each)
S & F in repairs 15mm bore angle stop valve, fancy type PTMT screwed for iron pipe complete (Minimum weight 90 gms/ Each)
S & F in repairs 32mm bore brass CP bottle traps for wash basin with inlet & outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete
S & F in repairs 40mm bore brass CP bottle traps for wash basin with inlet & outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete
S & F in repairs PTMT grating doom 125mm dia with or without waste hole complete. (Minimum weight 25gms)
S & F in repairs PTMT grating doom 100mm dia with or without waste hole complete. (Minimum weight 40gms)
S & F in repairs 40mm bore brass chromium plated waste coupling for kitchen sink/WHB with inlet and outlet screwed for pipe or connections inclu necessary packing, union and cap and fixed complete
S & F in repair brass CP soap dish (glossy finish) any size fixed to plugs with chromium plated brass screws complete
S & F in repairs toilet paper holder brass CP box type (glossy finish) fixed to plugs with chromium plated brass screws complete.
S & in repairs PVC connection 450mm long 15mm size with brass CP nuts at ends complete
S & in repairs PVC connection 600mm long 15mm size with brass CP nuts at ends complete
S & F in repairs low level flushing cistern PVC 10 Ltrs capacity with all internal fittings, bracket and including 32mm bore PVC flush pipe complete
S & F in repairs brass chromium plated PVC flush pipe 32mm bore for low level flushing cistern complete. ( This item will not be measured under item No 54)
S & F in repairs brass chromium plated hand shower (health faucet) with 1 Mtr flexible CP rubber tube with hot & cold water supply wall hook, bracket etc complete set of superior quality
S & F stainless steel peg set of 5 hooks fixed with screws complete & as directed
S & F in repairs brass tubular towel rail 20mm dia 'D' type, 600mm long of CP fixed with and including CP brass screws and wooden/plastic cleats
S & F in repair 20mm ball valves high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete (Minimum weight -210gms/ Each)
S & F in repair 15mm ball valves high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete (Minimum weight -142gms/ Each)
S & F in repair kitchen sink with drainage board size 915mm x 460mm, bowl size 410 x 330 x 160mm made of stainless steel sheet 1.00mm thick with plugs, washers and waste pipe and coupling etc including bedding in cement mortar on dwarf wall or cantilever brackets and connection including 32mm CP waste coupling & flush pipe 32mm dia complete.
Disconnecting existing tanks, setting aside (or lowering if required), reconnecting and refixing in position as directed, including cleaning with bleaching powder and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc of water tanks Exc 250 & n exc 500 litres capacity complete all as specified and directed.
Ditto all as per item No 63 above but exc 500 & n exc 1000 litres capacity.
Taking down chowkat with shutter (without taking off shutter from the frame) area n.exc 1.5 Sqm each complete all as specified and directed
Taking down shutters of any description exc 1.0 Sqm but n.exc 2.0 Sqm each complete all as specified and directed
Taking down shutters of any description n.exc 1 Sqm each
Taking down chowkat with shutter (without taking off shutter from the frame) area exc 1.5 Sqm but n.exc 4.00 Sqm each complete all as specified and directed
S & F factory made solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete as per specification & drawing of SSR part II.
M & L factory made dolid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet stripo of 20mm width stuck inside with solvent cement for stiles and plain colour sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, fixed in the frame at site as per specification of SSR Part II and directed by Engr-in-Charge.
S & F second class hard wood plain, solid, straight chowkats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints complete all as specified and directed
S & F in repair 30mm thick flush shutter, solid core construction with block board core and ply wood panels commercial type on both side with including teak wood beading on all edges.
M & F for second class hardwood glazed and skeleton door shutters 30mm thick, open rebated and prepared to receive glass gauge etc edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, gauge etc complete
S & F Mild steel flat iron work as in hold fasts etc confirming to Fe-290 Gde E-165.
M&L PCC 1:2:4 type B-1 using 20mm graded stone aggregate for fixing of hold fast etc complete as specified & directed.
M & L for preparation of new wooden surface exceeding 10 Cm width or girth and apply two coats of synthetic enamel paint over one coat of pink primer complete as specified & directed.
S & F stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples
S & F aluminium alloy anodised sliding door bolt with hasp, staple and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 250mm long complete all as specified and directed
S & F butt hinges, medium weight, cold rolled mild steel 100mm size
S & F butt hinges, medium weight, cold rolled mild steel 75mm size
S & F aluminium anodised barrel tower bolts of extruded section 150mm long complte
S & F aluminium handle fabricated type anodised 150mm long complete
S & F in repairs MS steel window handle left/right as per existing size including necessary welding
S & F in repair 450mm long MS stay
Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frame including punching or drilling out old glazing pins/spring clips complete all as specified & directed
S & F 3mm thick figured glass pin headed type and glazing with oil putty in square n.exc 0.5 Sqm in each pane complete
M & L welding in repairs, n.exc 2.5cm in length, thickness of metal to be welded n.exc 6mm complete
S & F in repairs vitreous china wash down closet (pedestal patern/EWC) pan white with 'P' or 'S' trap including connection to drain or outgoing and to syphonage pipe and including water closet seat, black/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete.
M & L for providing PCC 1:1½ :3 (using 12.5mm graded aggregates) in sunken portion
M & L for providing PCC 1:5:10 using 40 mm graded brick aggregate as in sub base of floor, mass concrete or in sunken portion.
Taking down existing water proofing treatment and cleaning roof or sunken floors by washing and rubbing etc and removing the material retrieved to a distance n.exc 500m where directed and providing water proofing treatment to sunken floors all as given below :- (a) Making fillet of size 25mm x 25mm at corner of slab and wall with polymer modified cementitious (PMC) mortar consisting of one part of tapecrete P-151, two parts of cement and 6 maprts of fine sand by weight. (b) Sealing joints of pipe with epoxy puttu CICO POXY LC or eposy mortar CICO POXY 2125. (c) Cleaning the conrete surface by brushing and watering and applying a coat of tapecrete P-151 Acrylic Polymer Modified cementitious slurry consisting of one part of TAPCRETE P-151 and two parts of cement by weight. The coating shall be carried out upto 300mm above FFL and shall be allowed to dry for 4-6 hours. (d) Applying a coat of TAPCRETE brush topping 1.5mm thick consisting of one part of TAPECRETE P-151, two parts of cement and two parts of silica sand by weight and cured for 2 days. (e) Applying 15mm thick plaster in CM 1:4 mixed with CICO super at 100ml per 50 Kg cement on treated surface
M & L for preparation of old surface of wall by complete removal of existing treatment from wall/ ceiling and washing, rubbing down and stopping of distempered / painted surfaces.
M & L for applying 2mm thick wall care putty on walls/ ceiling complete all as specified & directed by Engineer-in-Charge.
M & L for preparation of old surface of wall and applying two coat of cement base paint
M & L for preparation of new surface of wall and applying two coat of cement base paint over a coat of primer
M & L for preparation of old surface and of wall applying one coat of cement base paint
M & L for preparation of old surface of walls applying two coats of Oil bound Distemper on walls complete all as specified & directed by Engineer-in-Charge.
M & L for preparation of new surface and applying two coats of Oil bound distemper on walls over a coat of primer complete all as specified & directed by Engineer-in-Charge.
M&L for preparing new plastered surfaces of ceiling and applying three coat of white wash on ceiling
M & L for preparation of old painted surfaces and applying one coat of Oil bound Distemper on walls complete all as specified & directed by Engineer-in-Charge.
M & L for preparation of old plastered surface of walls including cornices and apply one coat of white wash complete all as specified & directed by Engineer-in-Charge.
M & L for preparation of old plastered surface of ceiling including cornices and apply one coat of white wash complete all as specified & directed.
M & L for preparation of old wooden surface exceeding 10 Cm width or girth and apply one coat of synthetic enamel paint complete all as specified & directed.
M & L for preparation of old steel surface exceeding 10 Cm width or girth and apply two coat of synthetic enamel paint complete all as specified & directed.
M & L for preparation of old steel surface exceeding 10 Cm width or girth and apply one coat of synthetic enamel paint complete all as specified & directed.
Note :- (i) Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ. (ii) Make of material shall be as per mentioned in Particular specifications or Appendix 'B' to Particular specifications as approved by AGE (I) AF manauri
RK Enterprises
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .