Construction of New Building of Govt. College at Kairu in Distt. Bhiwani (Pdg. E.I Internal only). RECALL

Amount

Moulded case Circuit breakers:- Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. (HSR 31.12 (c). i) 15 amp.to 60 amp. 415 V ,10 KA 3-phase.

ii) 100 amp.to 220 amp.415 V,10 KA 3-phase.

iii) 250 amp. 415 V , 35 KA 3-phase.

iv) 300 amp. to 400 amp. 415 V, 35 KA 3-phase.

Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suiteble size of rag bolts with cement concrete, duly painted with three coats of approved paint including one coat of red oxide. (HSR 31.13) ii) Size 40 mm x 40 mm x 6 mm.

M.S. Sheet (HSR 31.14)i) Supply and erection of 3 mm thick mild steel sheet duly welded on existing M.S. angle iron frame for fixing the main switches etc. as required, duly painted with three coats of approved paint including one coat of red oxide.

Distribution board with plug and socket: Supply and erection of sheet steel enclosure 2 pole / 3 pole with earth plug and socket suitable for incorporating single pole / triple pole MCB on wall / on existing pedestal complete with necessary connections etc. (HSR 31.15) ii) S.P.N. enclosure for single pole MCB 20 amp

Miniature Circuit Breaker and Isolator. Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. (HSR 31.17) Miniature circuit breakers of 9 KA breaking capacity. ii) SP MCB 6 amp. to 32 amp.

v) TP MCB 6 amp. to 32amp.

vi) TPN MCB 6 amp. to 32amp.

ix) TP MCB 40 amp. to 63 amp.

x) TPN MCB 40 amp. to 63 amp.

Supply and erection of Fittings and Accessories. (HSR 31.18)xi) Bakelite angle / straight button holder large size.

vii) Call bell 220 / 230 volts A.C. bakelite with double coil.

ix) Bell push flush type ( without flexible wire ) in existing sheet.

xii) Switch 5 amp. On existing sheet.

xiii) Wall socket 5 amp. On existing sheet.

xxvi) Supply and erection of hexagonal M.S. box 1.60 mm thick having each side 8 cms , 7.5 cms deep top covered with M.S. lid by means of screws including 10 mm dia 30 cm long mild steel rod made into suitable suspension hook and erected in RCC slab for erection of fan , the bottom covered with 3 mm thick bakelite sheet with suitable holes , painting etc. complete with all labour and material required to complete the job.

xxiv) Erection only of 1x40 watts or 2x40 watts 1220 mm long / 1x20 watts or 2x20 watts ,610 mm long fluorescent tube fitting directly on wall including necessary connections with 0.75 sqmm ( 24 / 0.20 mm ) PVC copper flexible cable for connecting the tube with the adjecent point.

Erection and carriage of fans (HSR 31.20)i) Erection of ceiling fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to the site of work.

iii) Erection of exhaust fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to he site of work.

v) Making suitable hole in the wall upto 450 mm sweep exhaust fan including finishing the same and fixing of wire mesh duly fixed with Deodar wood frame of section 40 mm x 25 mm thick.

vi) Pdg. and fixing of required size of deodar wood frame of section 50 mm x 32 mm for fixing exhaust fan upto 450 mm sweep.

Pipe Laying.: Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. (HSR 31.21)xxi) Heavy guage welded conduit pipe 20 mm dia 1.60 mm thickness flushed.

xxii) Heavy guage welded conduit pipe 25 mm dia 1.60 mm thickness flushed.

xxx) Supply and erection of PVC pipe of 6 kg. pressure laid 1 metre below ground level complete including digging refilling of the trench with jointing etc. a) PVC pipe 120 mm dia.

(Q) Earthing (HSR 31.22)iii) Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

iv) Earthing with tinned copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required.

v) Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode.

x) Pdg. and fixing 25 mm x 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required .

xi) Pdg. and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as required .

xii) Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required .

Under Ground Cables: Supply and erection of underground cable 1 meter below ground level covered with sand and bricks including necessary connections, digging and refilling of trenches. (HSR 31.25) xxvii) 70 Sq. mm 3.5 Core Ard. Cable .

xli) 25 Sq. mm 4 Core Ard. Cable .

Supply and erection of underground cable ,loose in existing pipe or trenches complete with necessary connections. (HSR 31.26) xxvii) 50 Sq. mm 3.5 Core Ard. Cable.

xxviii) 70 Sq. mm 3.5 Core Ard. Cable.

xxx)120 Sq. mm 3.5 Core Ard. Cable.

xl) 16 Sq. mm 4 Core Ard. Cable .

xli) 25 Sq. mm 4 Core Ard. Cable .

Supply and erection of suitable compression type brass cable glands for underground Cable. (HSR 31.28) ii) 10 Sqmm to 16 Sqmm Cable 2 to 4 Core .

iii) 25 Sqmm to 50 Sqmm Cable 2 to 4 Core.

iv) 70 Sqmm to 95 Sqmm Cable 3 to 3.5 Core .

v) 120 Sqmm to 185 Sqmm Cable 3 to 3.5 Core

Miscellaneous (HSR 31.35).vii) Supply and erection of 75 mm x75 mm x 60 mm deep M.S.box for telephone and inter-communication system including 2 pin 5 amp. socket including cost of Bakelite sheet

PVC Insulated wiring in recessed conduit. Wiring in 1.5 sqmm PVC insulated copper conduct cable in 1.6 mm thick conduit pipe. (HSR 31.36) i) Fan Point a) Short Point

b) Medium Point

c) Long Point

ii) Light Point a) Short Point

b) Medium Point

c) Long Point

iii) Twin Control Light point with 2 way, 5 amp. Single pole switch c) Long Point

vi) Call bell point including MS box of size 180mmx 60 mm deep for call bell. c) Long Point

vii) 3 pin 5 amp. Plug point including earthing the 3rd pin etc. a) Short Point

c) Long point

viii) 3 pin 15 amp. Plug point with 4 amp. PVC insulated copper conductor cable including earthing the 3rd pin etc. c) Long point

S/E of of PVC unsheathed copper conductor cable single core 1100 volts grad in pipe of suitable size excluding cost and erection of pipe. (HSR 31.40) i) Cable size 1.5 sqm(3/0.81 mm)

ii) Cable size 2.5 sqm(3/1.05 mm)

iii) Cable size 4 sqm(7/0.85 mm)

iv) Cable size 6 sqm(7/1.05 mm)

v) Cable size 10 sqm(7/1.35 mm)

S/E of double door sheet steel enclosure distribution board suitable for MCBs and ELCBs recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-Charge of the work. (HSR 31.41) v) 4-way,TP&N (Horizontal)(8+12)

vi) 8-way,TP&N (Horizontal)(8+24)

vii) 12-way,TP&N (Horizontal)(8+36)

S/E of PVC conduit pipe ISI marked (Medium) recessed in wall/ ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of the work. (HSR 31.44). b) 25mm dia

Supply & erection of Socket size rotary step type Electronic regulator for A.C. ceiling fan Anchor make Delux model No. 50440 ISI / SSK make PC 561 operated on 120/280 V A.C. Supply complete including cutting of existing Bakelite sheet and making necessary connection ect upto the entire satisfaction of the Engineer-in-Charge of the work. (HSR 31.55)

iii) Load Bank 4 way 400 Amp.

iv) Load Bank 8 way 400 Amp.

Non Schedule items Supply and erection of Double door sheet, steel superline distribution boards suitable for veritcal MCCBs 16 KA MCCB upto 125 amp as incomer (but without cost of MCCBs) complete with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. Make:- Havell's/ Indoasian. 4 way DB Vertical

S/E of M.S. box for computer made of 16 guage of size 250mm x 200mm x 100 mm deep covered with 5 mm thick bakelite sheet white colour of ISI mark fixed by means of 4 nos .brass screws with cost of 1 No. 15 amp multi socket of ISI mark and 15 amp switch and 3 nos .5 amp multi socket with 5 amp switches of ISI mark including fixing the M.S. box in wall with cost of cement sand mixture including painting of M.S. Box and to complete the job in all respect upto the entire satisfaction of Engineer-in- Charge of the work.

S/E of indoor commercial recessed mounted LED panel 2'X2' of 36 W of BCTBLR 36W LED FP WH of Bajaj make/ Equilant model of Philips and Crompton with Fixture size 595x595mm, Invative direct/ indirect luminaire suitable for armstrong/ Grid ceiling with high brightness LEDs and conical de-glaring center panel for effecient downlight completed including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work.

M/s JSB Enterprises