Providing Remodification of Existing Corporation Building Sound Treat Booth Sound Field and Interior for Diagnostic Center at Chithambaranagar Shopping Mall in Thoothukudi City Municipal Corporation

Dismantling the Existing Brick work including all cost and conveyance of labour charges and clearing the site, etc., complete complying with standard specification and as directed by the departmental officers. Second floor

Dismantling the Existing RCC work including all cost and conveyance of labour charges and clearing the site, etc., complete complying with standard specification and as directed by the departmental officers.

Removing the Existing Floor tiles work including all cost and conveyance of labour charges and clearing the site, etc., complete complying with standard specification and as directed by the departmental officers.

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire)

Supplying and erecting centering for plane surfaces such as RCC Floor/Roof Beam, Lintels, Cantilever Beams, Bed Blocks etc.. with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over Steel adjustable Span of Size 2m x 2m(expandable upto 3.60m) and Silver Oak Joists of Size 10 x 5 cm spaced at 50cm to 60cm c/c and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) Spaced at not more than 50 to 60cm c/c , etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid).

Providing and laying in position, standardised concrete Mix M-20 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without inspiring strength and durability with about (5 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost ofreinforcement grill and fabricating charges, centering and shuttering and also including laying,vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc.,complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials). Second Floor

Brick work in following Cement Mortar using best quality Burnt Clay Brick of size 8 3/4” x 4 1/4” x 2 3/4” with class designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge. For Second floor

Paving the floor with best quality v Vitrified Tiles of Size : Stainfree Nano polished Vertified tiles 600 x 600 x 8mm and variety conforming IS 15622 with water absorbtion less than 0.08% of approved colour and shade laid over cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer in all floors and the top pointed with Water Resistant Tile Epoxy Grout etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Anti-termite treatment : Providing pre construction anti-termite treatment all round the floor level including guarantee for ten years from the final date of completion as per I.S.Code 6313(part II) - 1981.- (As per manufacturers spec only).Rate includes all materials, labour charges, transportation and lifting charges.

Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers.

Gypboard Ceiling: Supplying and erecting the false ceiling with gypboard suspended to the celing Using Perforated Sheets (10mm thick) with GI metal Galvanized sections of EXPERT 120GSM and suspenders as per the manufacturers specification and procedures approved by architect. The boards are to be joined and finished so as to have a flush look which includes filling and finishing the tapered and square edge of the boards with jointing compound & joint paper tape, Complete as per drawing. The ceiling has to be painted with two coats of primer and two coats of emulsion paint of Asian Paints make. Complete as per drawing. Rate including all materials, labor charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations, transportation charges, loading, unloading, surface cleaning and as complete with all respects complying with relevant standard specification.

Plywood partitions :Supplying and fixing Full height plywood partition with Aluminum Sections of brand Hindalco, Alcoa or Jindal of size 2 " x 2" fixed in the Roof Ceiling and Floor Level, the framework shall be placed in vertical & Horizontal directions at a spacing of 2'-0" c/c as per site condition . The frame work should covered with 9mm commercial plywood. It shall be finished with 6mm finishing MDF. The MDF will be finished with primer and 2 coats of Asian Paints emulsion paint as specified by the Architect.

Glass doors : Supplying and fixing of 7' high glass doors in aluminium partition with Saint Gobain 10mm toughened clear Glass fixed within 2"x2" aluminium section fixed in the Floor Level, clear glass to be fixed with necessary hardware and rubber beading to match powder coated metal on both sides of the glass . Aluminium framework to be powder coated to colour as per architect's specs.

Aluminium and gypsum, door in ceiling ( Trap Door ) : Powder coated Aluminium frame trap doors with gypsum panel fixed within it to acesss service above False Ceiling. Frame size to be 450mm x 450mm. Door to be fixed with hinges and option to remove gypsum panel from framework.

Supplying and fixing solid core flush shutter of following type with thickness and necessary T.W. internal lipping alround conforming to IS 2202-1(1999) including cost of wind appliances and furniture fittings such as 3 Nos of SS 304 Grade Parliament Hinges of Size (125mm x 150mm) , 2 Nos 300x12mm aluminium tower bolt 1 No. 200x12mm aluminium tower bolts 1no. 250x16mm aluminium aldrops, 2 nos. 200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete complying with standard specification and as directed by the departmental officers - Single leaf.

Painting New Plastered Wall Surface with Three finishing coats of ready mixed (Emulsion)of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specificationand as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Wiring with 2x1.5 sq.mm. PVC insulated SCunsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5AFT switch and making good of the concealed portionwithsuitablecolourforPVCconcealedlight/fan Point (for electronic regulator) (5 points per coil)

Wiring with 2x1.5 sq.mm PVC insulated SCunsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories with 150x100x113mm TW switch box for 5A3 pin noninterlocking Wall socket with 5A flush types witch with painting of suitable colour with continuous earth wire connection of 1.5sq.mm copper wire for open PVC plug point SD36

Wiring with 2x4sq.mm. PVC insulated SCunsheathed FRLS copper conductor cable of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with150mmx100mmx113mm TW switch box with 3mm thick hylem sheet for15A 3pin non inter lockingwall socke twith15A flush type switch with continuous earth wire connection of 4sq.mm copper wire and making good of the concealed portion with suitable colour for concealed power plug point SD 40

Supply and fixing of 18W LED Round type Recessed fitting with LED (Higher end) on false Ceiling from ceiling with PVC unsheathed FRLS copper leads from terminals to the fitting. SD 452

Supply and fixin gof 1200mm (48")sweep AC ceiling fan complete with stepped electronic 300W regulator with1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") SD 106

Metal bookshelf - Supplying and fixing of display unit with Aluminum rods and plywood shelves. 15mm dia Al pipes fixed to wooden seat and ceiling with metal plates and fastener screws. 1" wide Al flats to be welded every 2' cc along Al pipes. Al pipe and flat to be powder coated. 19mm plywood shelf with laminate finish to be fixed to MS flats with screws. Laminate make to be Merino or Century as per colour chosen by architect.

Supplying and fixing of Reception Table for Office Counter desk Made in Particle board/ MDF/Plywood and Wire Manager colour as per architect's specs.

L-Shape office desk Supply and fixing of L shaped desk with Table top 25mm thick pre laminated particle board with 2mm edge lipping finish. Supported on 2" x2" square MS section legs creating a square frame leg as per design in powder coat finish. Flip up wire manager is provided on laminate top. 5' length of table(L part) will have storage below with lockable shutters in laminate finish. All internal shelves shall be using 12mm com ply and finished with 1mm laminate both sides,and the entire unit will include all hardwares like S.S handle, Hinges, etc. Complete with all hardwares of Ebco/Hettich make or similar. etc. The rate should included debris clearing, Materials lead and lift, cleaning , etc. complete as per drawing. Overall Size:- 5'6"(l) x 5'0"(l) x 2'6" (ht)

L-Shape office desk Supply and fixing of L shaped desk with Table top 25mm thick pre laminated particle board with 2mm edge lipping finish. Supported on 2" x2" square MS section legs creating a square frame leg as per design in powder coat finish. Flip up wire manager is provided on laminate top. 5' length of table(L part) will have storage below with lockable shutters in laminate finish. All internal shelves shall be using 12mm com ply and finished with 1mm laminate both sides,and the entire unit will include all hardwares like S.S handle, Hinges, etc. Complete with all hardwares of Ebco/Hettich make or similar. etc. The rate should included debris clearing, Materials lead and lift, cleaning , etc. complete as per drawing. Overall Size:- 5'6"(l) x 5'0"(l) x 2'6" (ht)

Dining Tables/Lunch tables ( Lunch rooms & Pantry ) -Supply & fixing of dining table with top as 25mm thick pre laminated particle board with 2mm edge lipping finish. 2"x2" powdercoated MS legs as per design.Rate should include debris cleaning, materials lead and lift, cleaning , etc. complete as per drawing Table size 4'8"(l) x 2'6"(w) x 2'6"(ht)

Waiting area chairs and Guest chairs- Supplying and placing of Plastic chairs including all cost and conveyance of labour charges

Executive Chairs - Supplying & placing of Leatherette chair of medium Back, Leatherette Seat & Back , adjustable armrest Gaslift, Centre-Tilt Mechanism, Chrome plated Arms & Base. The rate should include Materials lead and lift, cleaning , etc. complete as per drawing.

Please Enable Macros to View BoQ information