REPAIR AND RE-SURFACING OF ROAD AND ROAD FURNITURE AT VARIOUS LOCATION UNDER AGE B/R-I OF GE (AF) ADM AREA AT AF STN AGRA

M&L for Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) with 4.0% binder content of paving bitumen any penetration VG-30 grade by weight of total mix including cement filler, on surfaces rolled compacted with using 8 to 12 tonne capacity power roller to achieve the required compactness, camber and gradent mixed in hot mix plant using design mix and laid by mechanical paver finisher complete all as specified and directed.

M&L preparing existing black top surface or bituminous macadam surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc on back top / concrete surfaces than applying evenly a priming / tack coat with paving bituminous primer VG-10 penetration over the prepared surface by mechanical sprayer @ 5 Kgs/10 Sqm of surface area complete all as specified and directed.

M&L applying bituminous premix asphaltic Semi-dense concrete (SDAC), 30mm thick (consolidated thickness) with 5.5% binder content of paving bitumen any penetration VG-30 grade by weight of total mix including cement filler, on surfaces rolled compacted with using 8 to 12 tonne capacity power roller to achieve the required compactness, camber and gradent mixed in hot mix plant using design mix and laid by mechanical paver finisher complete all as specified and directed.

M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions.

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed

Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed.

S&F in rep ABS plastic speed bump/speed breakers in parabolic convex shape and of size 750 mm x 250 mm x 70 mm made out of steady plastic, dovetail interlocking sub units, jointed and fixed to make the bump perfectly uniform, bump made out of precolourd material (black/yellow) and UV stablizers to keep them perfectly colourful, studded with reflectors on either side to make it clearly visible to motorists during night hours complete all as specified and directed.

S&F for road side convex mirror of size 800mm dia(material polycarbonate) mounted on MS pipe of 2.10mtr long and dia of pipe is 80 mm embedded with PCC type B-1,1:2:4 (20mm graded aggregate) including RFR, removal and two coat of synthetic enamel paint over a coat of zinc chrome primer in MS pipe including necessary excavation and earth work in any type of soil for fixing and embeding the delineator on ground with hold fast using PCC (1:2:4) type B1(using 20mm graded stone agregate) (minimum PCC block size 300mmx300mmx300mm) for proper grouting complete.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete of design as approved by GE Complete all as specified and directed & incl demolition of kerb stone.