Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance ROOM NO 680 GANESH MURTY NAGAR PART NO 03 CAPT PRAKASH PETHE MARG COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | Admitted-Finance |
| 2 | Admitted-Finance 5 6 MINTO ROAD ALLAHABAD 211001 | PRAYAGRAJ | UTTAR PRADESH | 211001 | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance ROOM NO 997 GALI NO 3 PART NO 3 GANESH MURTHY NAGAR CUFFE PARADE COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | Admitted-Finance |
| 5 | Admitted-Finance 0 0 0 NEAR DAK BUNGLOW NH 1 A NH 1A UDHAMPUR UDHAMPUR JAMMU KASHMIR 182101 | UDHAMPUR | JAMMU AND KASHMIR | 182101 | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹99,980
Closing Date
3 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (NW) NOFRA
Dr Homi Bhabha Road New Navy Nagar Colaba Mumbai
REPAIR MAINT OF MES INSTALATIONS AND MAIN SEWAGE LINES AND GARRAGES IN NOFRA AREA UNDER AGE BR I UNDER GE (NW) NOFRA COLABA MUMBAI
2024_MES_664386_1
8293
Open Tender
Civil Works
Item Rate
330 days
Mumbai
Please refer tender documents
8 documents required · 8 mandatory
₹500
GE (NW) NOFRA
₹99,980
Yes
13 Sept 2024
6 Jul 2024
5 Sept 2024
6 Jul 2024
3 Sept 2024
20 Jul 2024
6 Jul 2024 - 13 Jul 2024
Amount
Note : 1. The tenderer shall note and check in ground before quoting his unit rate, all items of works shall be executed in any height of building & including provision of necessary scaffolding & safety measures. (a) Safety eqpt to be carried all time. (b) Functional tools & plants shall be carried by tradesman all time for attending any site. (c) Necessary ladder / cloth or any other material reqd. (d) Debris / site clearance immediately before leaving site. (e) A team will consist of 02 person will daily report to JE/AGE (f) Reduction of team can be done only with written permission of concern AGE. (g) In case of non-adherence of any of above fine/ penalty to be carried as under:- (i) 1st Time - Rs 200/- (ii) 2nd Time - Rs 500/- (iii) 3rd Time - Warning to contractor. (k) In case of 3 warning to contractor, it will be reflected in WLR for slow progress.
(i) Water charges will be applicabel as specified in CA. (ii) For electricity temporary meter to be installed by contractor for every quarter and electricity charge at allied as specified in CA.
Taking down cement plaster on brick/ surfaces built in cement mortor including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.
Demolition of brick work or stone /boulder masonry built in cement mortar, including all quoins, arches, pillars, etc complete all as specified and directed.
Material and Labour for Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for 20mm thick plastering in cement & sand mortar 1:4 in 2 coats (15 mm thick backing coat and 5 mm thick setting coat mixed with water proofing compound) on fair faces of brick work or stone masonary surfaces, finished even and smooth without using extra cement and all necessary scaffolding etc complete all as specified and directed (WPC shall be mesured and paid seperately).
Material and Labour for 15mm thick plastering in cement & sand mortar 1:6 on fair faces of brick work or stone masonary surfaces, finished even and smooth (w/o using extra cement) including all necessary scaffolding etc complete all as specified and directed.
Material and Labour for 5mm thick rendering on concrete surfaces as in ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified
Supply only integral water proofing compound complete all as specified and directed.
Material and Labour for preparing new plastered surfaces on walls and applying two or more coats of 100% premium acrylic paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (compony depot tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surfaces complete as specified and as directed.
Material and Labour for preparating new plastered surafces of walls and applying three coats of white wash on walls on newly plastered wall surfaces complete all as specified and directed.
Material and Labour for applying three coats of white wash on ceiling on newly plastered wall surfaces complete all as specified and directed.
Material and Labour for preparation of newly plastered surfaces and applying two coats of oil emlusion distemper white or tinted over a coat alkali resistant priming paint over 3mm thick wall care putty on wall complete all as specified and as directed .
Material and Labour for repair to Spalling of concrete, damaged surface of RCC elements like beams, columns, wall, slab by removing all loose cement plaster/concrete, dust, oil, paint, grease, waterproof coating etc, Expose fully any corroded steel in the repair area and remove all scale and corrosion deposits , Apply rust remover for rust free bars, apply Dr. fixit Epoxy zinc primer over the cleaned rebars and allow it to dry before pouring of Dr Fixit micro concrete or equivalent , appllying one coat of Dr fixit epoxy bonding agent before pouring of mix concrete, providing and laying of micro concrete at least upto 20mm thickness (average) by using the recommended water powder ratio mix the microconcrete with pan mixer as per manufacturer's instruction including watertight shuttering at any position including necessary curing and remocal of debris outside MD land complete all as specified and directed by Engineer-in-Charge. Note :- (i) Rate of rust remover, Epoxy zinc primer, Epoxy bonding agent and micro concrete is included in this item.
Demolition of plain cement concrete of any description and in any position not other wise specifically provided for any description complete all as specified and directed.
Roughening Surfaces of old Concrete Floor by picking, sweeping clean and washing down with water to remove dust etc brussing neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified and as directed
Material and Labour for PCC 1:2:4 type B0 (12.5 mm graded stone aggregate) as in roof kerbs/pading or mud stops, rounded or chamfered on edegs using Pidiproof LW+ water proofing chemical as per manufacturer's instruction, etc complete all as specified. (Water Proofing Chemical shall be measured and paid seperately).
Supply only Water proofing chemical Pidiproof LW+ complete all as specified and directed.
Material and Labour for the roof surface thoroughly wire brushed, washed and dried up and cleaned of all foreign matter and dust to receive bituminous primer, apply bituminous based cold applied primer @ 270 to 300 gms/Sqm manufactured by the same agency as that of APP all as per manufacturers instructions. Laying 5 layered 4 mm thick APP (A tactic poly propylene) modified membrane reinforced with 180 GSM (Gms/Sqm) of non woven polyester mat, applied by thermo fusion using LPG torch on the bottom portion of the membrane with an overlap of 100mm in longitudinal direction and applying two coats of bituminous aluminium paint on APP sheet incl removal of old damaged APP sheets and removing from MD land complete all as specified and as directed
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Material and Labour for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles including 20mm thick screed bed in CM 1:4 complete all as specified and directed.
Material and Labour for Coloured glazed ceramic tiles in vertical surface 450 X350X7mm thick , set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles including 10 mm thick backing coat in CM 1:3 complete all as specified and directed.
Material and Labour for for vitrified ceramic tiles 10 mm thick (square /rectangular ) polished dark shade, area of each tiles not exceeding 0.36 sqm, in floor etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the dark shade of the tiles including 20mm thick screed bed in CM 1:6 complete all as specified and directed .
Ditto- all as per item No. 23 above but as in skirting/ dado including 10mm thick rendering in CM. 1:4 as backing coat etc ccomplete all as specified and directed.
Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed.
Material and Labour for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types incl 15mm thick Screed bed or bedding layer in CM 1:4 for laying floor finishes complete all as specified and as directed.
Material and Labour for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
Extra over granite stone slabs for edge polishing/ chamfering/ noising/ grooves/ bevelling etc complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble, mixed with earth around, in layers n exc 25cm, watering and removing surplus soil to a distance n exc 50m and making surface good in hard/dense soil complete all as specified and directed.
Material and Labour for for PCC 1:7:12 type F2 using 40 mm graded stone aggregate as in filling, mass concrete etc including demolition complete all as specified and directed.
Material and Labour for PCC 1:3:6 type C-2 type (using 40mm graded crushedstone aggregate) as in foundation, filling and mass concrete including necessary formwork and demolition complete all as specified and directed.
Dismantling wrought iron or mild steel work of any descriptiion complete all as specified and directed.
Supply and Fix rolled mild steel as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) of Fe-410-W(Gde-E-250) quality-B including distance pieces, cleats etc including dimantling complete all as specified and directed.
Supply and Fix rolled mild steel as in Joist, channel, angle, or tee sections Fe 410 -W(Gde-E- 250) quality-A, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and directed.
Supply and Fix for rolled mild steel plates of Grade Fe 410-W, (Gde- E-250) quality-A as in connecting pletes, base plate etc. welding etc including dimantling complete all as specified and directed .
Supply and Fix for mild steel framed work such as grills, gratings, angle irons, pipe sections, flat iron, railings etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors ladders; framed balusters; walk ways; railings; framework of water tanks, embedded in concrete and similar work con- forming to Fe.290.Gde-E-165 at any height including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for for preparation of new steel surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified incl all necessary scaffolding etc complete all as specified and as directed.
Dismantling plain or corrugated steel sheeting any guage, thickness, including Nainatal or similar pattern roof coverings complete all as specified and as directed.
Supply and Fix pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Ditto all as per item No. 39 here-in-before but plain sheets as in ridges/flashing complete all as specified and as directed.
Taking down eaves/valley gutter and rain water pipes/PVC pipes/CI pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-neck,etc. ( measured over all as fixed along the centre line over fittings and accessories) complete all as specified and as directed.
Supply and Fix 160mm dia PVC ( SWR) grade pipes single socketed in any length with rubber ring joints fixed to walls with and including fixing clips, bends, elbow, shoes bends etc complete all as specified and as directed. (Note:- Measurment shall be taken along the centre line of the pipes.)
Supply and Fix 50mm, low density polyethylene pipes (LDPE) of pressure rating 6 kgf/Sqcm fixed complete to walls, ceilings or in floors etc in repairs complete all as specified and as directed.
Supply and Fix 110mm dia PVC ( SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls or laid in flloors/trenches complete all as specified and as directed.
Supply and Fix 75mm dia PVC ( SWR) grade pipes single socketed in any length with rubber ring joints fixed to walls or laid in flloors/trenches complete all as specified and as directed.
Supply and Fix in repairs PVC SWR floor trap 75mm, plain with grating including setting and jointing with solvent cement complete all as specified and as directed.
Supply and Fix in repairs vitrous china squatting pan 'Orrisa Pattern' size 580x440mm white with integral foot rest including connecting and necessary provision of lime concret complete all as specified and directed by Engr-in-Charge
Supply and Fix in repairs white vitreous china washed down water closet pan, (pedestal pattern), white, with and including P/S Trap, PVC solid type seat cover etc, fixed in repair complete all as specified.
Supply and Fix in repairs vitreous china urinals, bowl type, flat back, size 465X355X265mm, white, with grating and union for discharge pipe, complete incl. providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, fixing of flush pipe, grating and Union for discharge pipe complete all as specified and as directed.
Supply and Fix in repair 10 litres capacity PVC low level flushing cistern of approved make including ball valve, syphon set, inlet and outlet pipe complete all as specified and as directed.
Supply and Fix in repair white glazed earthen ware vitreous china wash hand basin of size 550 x 400 mm with and including CI brackets, 32mm bore brass CP waste coupling Inlet/ outlet, PVC connector pipe etc complete all as specified and as directed.
Supply and Fix in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.
Supply and Fix in repair 15 mm dia fancy type pillar tap cast copper alloy with capston heads chromium plated screwed down high pressure with or without hot or cold with long screws shanks and fly nuts screwed for iron pipes all as specified and directed.
Supply and Fix in repairs 15 mm bore dia of pipe, brass chromium plated fancy type bib tap complete all as specified and as directed.
Supply and Fix in repair chromium plated, tubular towel rail 20mm dia, D type, 60 cm long between flange, complete all as specified and as directed.
Supply and Fix in repair PVC Connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.
Supply and Fix in repairs 15mm size Stop Valves fancy type chromium plated screwed down high pressure with crutch or butterfly handle handle screwed both ends complete all as specified and as directed.
Taking down 15 mm bore, GI tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed.
Taking down 20 mm bore, GI tubing and connections including cleaning for refixing or removal to store.
Supply and Fix 15mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors all as specified and directed complete all as specified and as directed.
Supply and Fix 20mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors all as specified and directed complete all as specified and as directed
Surface excacation n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed
Material and Labour for hardcore of gauge n. exc 63mm of brocken stone or boulders, deposited, spread and levelled in layers n exc.15 cm thick watered and rammed to a true surface complete all as specified and directed
Material and Labour for 100 mm thick PCC 1:4:8 type D2 (Using 40mm graded stone aggregate) as in sub base complete all as specified and directed
Material and Labour for Sand filling under floors or in foundation including watering and consolidation all as specified and as directed. Note:- Punned down thickness shall be considered for payment only.
Material and Labour for machine pressed precast concrete interlocking paver block with Grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thick confirming to IS 15658-2006 made of M35 grade concrete including dismantling complete all as specified and directed
Material and Labour for chequered cement concrete tiles 300x300x25mm etc. glosy finish set and jointed and pointed in neat cement slurry in floor with grey cement and pigment over and including 20mm thick screed bed in CM 1:4, including dismantling complete all as specified and as directed by Engr in Charge.
Removing excavated material n. exc. 50m and n.exc 250m depositing where directed at a level n. exc.1.5 m above the starting point complete all as specified and directed
Taking down chowkats or frame with shutter (without taking off shutter from frame), n exc 1.5 sqm each complete all as specified and directed.
Taking down chowkats or frame with shutter (without taking off shutter from frame), exc 1.5 sqm but nexc. 4 Sqm each complete all as specified and directed .
Supply and Fix 30mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side complete all as specified and directed .
Supply and Fix Decorative laminate 0.9 mm thick, type 1, of texture finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions complete all as specified and directed .
Supply and Fix powder coated aluminium frame/shutters for partition, doors, windows, ventilators etc. including joining cleat for fixing, PVC rollers, locking arrangement, rubber beading, rubber gasket, screws, handles, hinges, tower bolts etc.including taking down complete all as specified and directed. Note :- (i) Glazing and wire mesh shall be measured and paid separetely for supply only as the labour element included in this item. (ii) Item shall be paid as per weight of aluminium section. (iii) the rete quoted shall be inclusive of the cost of neoprene beading, glazing pin. screws and powder coated fittings such as hinges, handles, locking arrangement etc as required, which shall not be measured for arriving the weight. (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing surface area.
Supply and Fix 4 mm thick sheet glass, ordinary quality, in any size of pane complete all as specified and directed.
Supply and Fix 4 mm thick figured glass, pin headed type, in squares n exc 0.5 Sqm in each pan complete all as specified and directed .
Supply and Fix in repairs Sun control film, 50 micron non reflective type,sticked to glass as per manufacturers instructions complete all as specified and directed by EIC ( Make - as approved by GE).
Supply and Fix in repairs 12 mm thick Medium density fibre board, exterior grade both side decorative choice laminations, fixed to timber/ Aluminium frame work with screws complete all as specified and directed .
Supply and Fix in repairs aluminium (Die cast) body, door closer, hydraulically regulated, desig. No. 2, unversal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed
Supply and Fix Aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy complete all as specified and as directed
Supply and Fix stainless steel butt hinges of size 100mm all as specified and directed.
Supply and Fix Aluminium alloy anodised barrel tower bolt 100mm long complete all as specified and as directed
Supply and Fix Aluminium alloy anodised barrel tower bolt 150mm long complete all as specified and as directed
Supply and Fix extruded aluminium alloy handle fabricated type anodized 100mm long complete all as specified and as directed
Supply and Fix extruded aluminium alloy handle fabricated type anodized 150mm long complete all as specified and as directed
Material and Labour for Steel rolling shutters 1mm thickness of lath sheet without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete; gear operated type with bevel gear box and crank handle including taking downof old rolling shutter complete all as specified and directed.
Fixing for chain link MS galvanised fencing any size or type including line wires, any mesh, size and type to any type standards, rails, straining bolts, etc. including provision of binding wire and including necessary nut and bolts, includinng dismantling complete all as specified and as directed.
Supply only Galvanised chain link fencing mesh of size 50 x 50 mm 4.0 mm dia with minimum 1.0 mm thick PVC coating fixed to any standards rails straninig bolts etc complete all as specified and as directed
Material and Labour for Preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
Material and Labour for Preparation of old painted steel surfaces of any description not otherwise over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
Material and Labour complete removal of existing treatment on wall surfaces and applying 3mm thick wall care putty, sanding the surfaces till even and smooth finish and applying one coat of wall primer, and finally applying two coats of oil bound distemper of approval tint complete all as specified and as directed.
Material and Labour for Preparation of old plastered or unplastered decorated surfaces of wall including cornices, pillasters etc and applying one coat of white wash on walls complete all as specified and as directed.
Ditto all as per item No 92 herein-before but in ceiling.
Material and Labour for complete removal of existig treatment of walls and applying two coats of cement base paint of external surfaces over a coat of primer complete including necessary scaffolding for any postion/height all as specifed and directed by the Enginner - in -charge. Note :- (a) Acrylic painting shall be done with rollers.
satguruenterprises (BID ID -3070704)
SN CONSTRUCTION (BID ID -3069465)
K.C.P ENTERPRISES (BID ID -3073699)
B P ENTERPRISES (BID ID -3073793)
SHREE JAGDISH FURNITURE CO. (BID ID -3069401)
SHRI SAI ENTERPRISES (BID ID -3074560)
SR Construction (BID ID -3069330)
Shivam Enterprises (BID ID -3074440)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .