ReRepair and Renovation of Control room at 220 KV Sub station hulal under p and m division mandi gobindgarh 2

Amount

RCC retaining wall for the Protection of T. No.54, 132kV Goraya -Jamalpur Line .

Regrading terracing of mud plaster covered with tiles or bricks in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud plaster to proper, slope, relaying mud plaster Gobri leaping and tiles or bricks grouted in cement mortar 1:3 (1 cement and 3 fine sand) including replacing unserviceable tiles, or bricks with new over and disposal of unserviceable material to the dumping ground within 50 m lead (The cost of new tiles or bricks excluded). As Per CSR item no. 31.11

Cement concrete 1:2:4 gola 10 cm X 10 cm concave quardant along junction of roofs with parapet wall finshied smooth. As Per CSR item no. 13.55

Replacement of worn out tiles with new tiles. As Per AOR

P/F Polythene sheet. As Per AOR

Dismantling cement conglomerate floors (25mm to 50mm) thick including concrete base. As Per CSR item no.8.16

Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Design is homogenous throughout the tile body ). a) 600 mm X 600 mm. As Per CSR item no. 14.113 a

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading. As Per CSR item no. 14.72

Providing and fixing 10mm thick acid and/or alkali resistant tiles 300 mm x 300 mm of approved make and colour using acid and/or alkali resisting mortar bedding and joints filled with acid and/or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge, in flooring or in dado / skirting on a bed of 12 mm thick mortar 1 : 4 (1 acid proof cement: 4 coarse sand). As Per CSR item no.14.130

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-inCharge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. As Per CSR item no.14.125

Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. As Per CSR item no.30.4

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. ii size 550 X 400 X 815 mm. As Per CSR item no. 30.32 ii

Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) a 600 mm X 450 mm. As Per CSR item no. 30.61 a

Providing & fixing in position best Indian make (to be approval of the Engineer-incharge) vitreous Chinware white flat back or angular lipped front urinal size 440 x 315 x 265 mm C.P. brass flexible tube connection 450 mm long. As Per CSR item no. 30.15

Providing & Fixing in postion C.I.bib cock as per IS:210 with stainless steel spindle of approved make (to the approval of Engineerin-charge ) complete in all respect. 15 mm dia. As Per CSR item no. 30.65 b i

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. A doors of area 3 sqm and below. As Per CSR item no. 8.26 a

P&F Aluminium door Fixed portion. As Per CSR item no. 17.45 a

P&F Aluminium door shutters for main door. As Per CSR item no. 17.45 b

Providing and fixing 12mm thick pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type II, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. As Per CSR item no. 17.46 ii

Providing and fixing glazing in aluminium door 5 mm thick. As Per CSR item no. 17.47 i

Cost of Aluminium fittings complete for doors,windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt). As Per CSR item no. 17.23 ii

Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two coats) (Corridoor). As Per CSR item no. 16.63

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish. As Per CSR item no. 16.66

Painting with acid proof paint of approved brand and manufacture to give an even shadetwo coats. As Per CSR item no. 16.64

Finishing walls with acrylic smooth exterior paint of required shade with two coats applied @ 1.67 litre/10sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 sqm. As Per CSR item no.16.59

Painting two coats excluding priming coat withsynthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. As Per CSR item no. 16.18 b

20 mm thick Cement Plaster 1:4. As Per CSR item no. 15.20

First class burnt brickwork laid in cement sand mortar 1:6. As Per CSR item no. 11.3 a

Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects. As Per CSR item no. 29.43 a

Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) BClass including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. 15 mm dia. As Per CSR item no. 28.35 a

Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) BClass including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. 20 mm dia. As Per CSR item no. 28.35 b

Less Iron scrap

Less wooden scrap

Extra carriage for cement

Extra carriage for sand

THE CHETANPURA COOPERATIVE L/C SOCIETY

The Goldstar Cooperative Labour and Construction Society Ltd.

The Khalsa Co-op L/C Society Ltd