SPECIAL REPAIR TO DAMAGED PORTION OF BOUNDARY WALL AT INS HAMLA

Amount

Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation etc n.exc 10 sqm on plan andd n.exc 1.5 m in depth and getting out in soft disintegated rock complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (40 mm graded aggregate ) in foundations, filling and mass concrete complete all as specified and directed.

M&L form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter flat rough finished surface of concrete complete all as specified and directed.

S&F TMT CRS bars 10mm dia & over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F for TMT bars 6 to 10mm dia as in reinforcement cut to length bent to shape required including cranking, bending and spirally binding with mild steel wire not less than 0.09mm dia or securing with clips as in Stirrups.

M&L for reinforced cement concrete with Design Mix M-30 using 20mm graded stone aggregate in foundations of and plinth beams

M&L form work to sides of pillars, posts, structs, piers, columns and stanchions square, rectangular or polygonal rough finished surfaces of concrete complete all as specified and directed.

Supply only 25mm thick Pre formed filler for expansion joints

M&L for reinforced cement concrete with design Mix M-30 using 20mm graded stone aggregate in pillars, piers, posts and struts

M&L form work to sides of pillars, posts, structs, piers, columns and stanchions square, rectangular or polygonal rough finished surfaces of concrete complete all as specified and directed.

M&L for reinforced cement concrete with design Mix M-30 using 20mm graded stone aggregate in Beams, cantilevers, bressummers, lintels.

M&L for PCC 1:3:6 ,type C1 using 20mm graded stone aggregate as in solid block masonry exc.100mm thick and built in CM(1:6) all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:4 on fair faces of brick or concrete surfaces finished even and smooth w.o using extra cement

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm in hard/dense soil complete all as specified and directed.

Removal of surplus soil to a distance exe 1.5 Km but n exc 5 km and deposting where directed

M&L for 20mm thick Broken glass coping in cement mortar 1:3 on top of walls

M&L preparation of plastered surfaces and applying two coats of cement based paint over a coat of wall primer as on walls

M&L Mild framed works such as angles, tees , channels, etc as in fenching posts large and small gates and grills , gratings and chainlink fenching etc, including hanging gates in pillar with proper pintle hinges, stops, hand made sliding bolts ,etc complete.

S&F in repairs of Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and fixing to any of standard rails straining bolts, includig securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc as directed

M&L applying Two coats of synthetic enamel paint on steel surfaces of any desccription exc. 10cm width or girth incl. preparation and one coat of red oxide on surfaces.

S&F in repairs of razer type concenrtina coil,9SWG hot galvanised spring tensile wire 145 to 150 newton per square mm, zinc coating 250-300 gram per sqm ,dia of coil when unstretched 610mm minmum no of coils 10 per RM after laying hot dip galvanised razer ribbon tape of size 0.50 mm thick 19mm wide before wrapping of central corewire fixed with 1.66mm thick GI clips 25 nos per running meter and special nut bolts ,hold 'z' coil together and extrra two rows parrel wire of 10 gauge complete all as specified and directed by the EIC and Dismantling of razer type concertina coil with two parallel rows of wire remove of the debris outside MD land complete all as specified and directed by EIC

Dismantling of brick work or stone boulder masonry,built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work and precast concrete articles. and removing of demolished materials out side MD land complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description specifically provided for gates, staircase railings, framed truss etc complete all as specified and directed.

GOPAL ENTERPRISES

M/s A G POUL

Vijay Enterprises