Tender for HT and LT line Extension and Improvement works in Avinashi Division Under K2 Agreement Works Contract

Transporting of RCC / RSJ / PSC / fabricated pole from road side to pole pit head - upto 1 km

Transporting of RCC / RSJ / PSC / fabricated pole from road side to pole pit head - above 1 km

Transporting of distribution transformer / metering set by using private vehicle other than bullock cart with load of one MT minimum / vice versa - upto 30 km

Transporting of distribution transformer / metering set by using private vehicle other than bullock cart with load of one MT minimum / vice vers - above 30 km

Transporting of line materials from sub-stores to section pocket or near the work spot at road side using private vehicle other than bullock cart with load of one MT minimum / vice versa - upto 8 km

Transporting of line materials from sub-stores to section pocket or near the work spot at Road side using private vehicle other than bullock cart with load of one MT minimum / vice versa - above 8 km

Loading of PSC / RCC poles upto 8.0 m

Loading of metal poles of all sizes

Loading of PSC / RCC poles 9 m & above

Unloading of PSC / RCC poles upto 8.0 m

Unloading of metal poles of all sizes

Unloading of PSC / RCC poles 9 m & above

Loading of distribution transformer upto 100 KVA

Loading of distribution transformer above 100 KVA and below 500 KVA

Loading of distribution transformer 500 KVA

Loading of Metering set

Unoading of distribution transformer upto 100 KVA

Unloading of distribution transformer above 100 KVA and below 500 KVA

Unloading of distribution transformer 500 KVA

Unloading of metering set

Excavation & back filling of pole pit for poles below 9 m per location by men / machine

Excavation & back filling of pole pit for poles 9 m and above per location by men / machine

Excavation & back filling of pole pit per location - hard rock requires blasting

Excavation & back filling of pole pit per location - hard rock without blasting

Erection of poles by men / machine - RCC / PSC / metal poles upto 8.0 m

Erection of poles by men / machine - RCC / PSC / metal poles 9 m

Erection of poles by men / machine - RSJ, PSC, rail, fabricated poles above 9 m

Mass concreting of pole including cost of cement, sand & jally with a mixture of 1:3:6, including all materials per pole

Sleeve concreting of pole including cost of cement, sand & jally with a mixture of 1:3:6, including all materials per pole

Earthing of pole with wire including burying loop and binding

Earthing of pole with earthing coil including burying loop and binding

Excavation & back filling of stay pit for poles below 9 m per location by men / machine

Excavation & back filling of stay pit for poles 9 m and above per location by men / machine

Excavation & back filling of stay pit per location - hard rock requires blasting

Excavation & back filling of stay pit per location - hard rock without blasting

Erection of stay set complete

Fixing of 11 KV pin insulator (porcelain with pin / polymer composite)

Fixing of 11 KV disc

Fixing of 22 KV pin insulator (porcelain with pin / polymer composite)

Fixing of 22 KV disc

Fixing of 33 KV pin insulator (porcelain with pin / polymer composite)

Fixing of 33 KV disc

Erection of 5 feet V cross arm

Erection of 1372 mm (4.5 feet) V cross arm

Erection of 1068 mm (3.5 feet) V cross arm

Erection of LT 3 phase cross arm

Erection of LT single phase cross arm

Erection of HT / LT TI fitting

Erection of double channel cross arm

Erection of guarding cross arm

Erection of tapping channel cross arm

Fixing of LT pin Insulator

Fixing of LT shackle

Fixing of knob

Fixing of HT LAS (3 Nos.)

Fixing of LT LAS (3 Nos.)

Paving of conductor, stringing, binding, jumpering complete with ACSR / AAAC for HT / LT line per KM -7/2.50 or 7/2.59 (Weasel)

Paving of conductor, stringing, binding, jumpering complete with ACSR / AAAC for HT / LT line per KM - 7/3.15 or 7/3.35 (Rabbit)

Paving of conductor, stringing, binding, jumpering complete with ACSR / AAAC for HT / LT line per KM - 7/4.09 (Raccoon)

Paving of conductor, stringing binding jumpering complete with ACSR / AAAC for HT/LT line per KM- 6/4.72 + 7/1.57 (Dog)

Guarding arrangements per span - split neutral guarding

Guarding arrangements per span - flat guarding with 4 wire (11 KV or 22 KV)

Assembling of top channel for double pole DT structure

Assembling of bed channel for double pole DT structure

Assembling of cross with stud for bed channel for double pole DT structure

Assembling of belting angle and HG fuse angle for double pole DT structure

Erection of AB switch, horizontal, double pole

Erection of HG fuse set complete for double pole DT structure

Structure earthing complete (3 Nos. earth pits and 3 Nos. earth pipes complete) for double pole DT structure

Feeding arrangements with open type fuse unit for double pole DT structure

HT & LT LAS fixing and jumpering complete for double pole DT structure

Fixing of support insulator angle and erection of 3 Nos. pin insulators for double pole DT structure

HT jumpering complete for double pole DT structure

Painting of all clamps and other iron materials and painting of structure pole for double pole DT structure

Provision of LT bus arrangements for double pole DT structure

Erection of single pole structure including transportation, excavation and erection in pole pit 3 X 3 X 6 feet by men or machine

Assembling & erection of single pole mounted GOS switch

Assembling & erection of single pole HG fuse set, solid core type

Erection of HT LAS for single pole DT structure

Erection of LT LAS for single pole DT structure

HT jumpering work for single pole DT structure

Feeding arrangements with open type fuse unit for single pole DT structure

Earthing for single pole DT structure

Sleeve concreting for single pole DT structure

Special structure painting for single pole DT structure

Erection of stay set for single pole DT structure

Erection of special DT centre support set with concreting for single pole DT structure

DT metering (whole current meter) arrangements (including fixing of DT meter box) for single pole / double pole DT structure

DT metering (LTCT meter) arrangements (including fixing of DT meter box) for single pole / double pole DT structure

Fixing of MODEM including accessories for single pole / double pole DT structure

Erection of transformer in new structure - below 200 KVA

Erection of transformer in new structure - 200 KVA & above but below 500 KVA

Erection of transformer in new structure - 500 KVA

Dismantling of poles by men / machine - RCC / PSC / metal poles upto 8.0 m

Dismantling of poles by men / machine - RCC / PSC / metal poles 9 m

Dismantling of poles by men / machine - RSJ, PSC, rail, fabricated poles above 9 m

Dismantling of stay set complete

Dismantling of 11 KV pin insulator (porcelain with pin / polymer composite)

Dismantling of 11 KV disc

Dismantling of 22 KV pin insulator (porcelain with pin / polymer composite)

Dismantling of 22 KV disc

Dismantling of 33 KV pin insulator (porcelain with pin / polymer composite)

Dismantling of 33 KV disc

Dismantling of 5 feet V cross arm

Dismantling of 1372 mm (4.5 feet) V cross arm

Dismantling of 1068 mm (3.5 feet) V cross arm

Dismantling of LT 3 phase cross arm

Dismantling of LT single phase cross arm

Dismantling of HT / LT TI fitting

Dismantling of double channel cross arm

Dismantling of guarding cross arm

Dismantling of tapping channel cross arm

Dismantling of LT pin Insulator

Dismantling of LT shackle

Dismantling of knob

Dismantling of HT LAS (3 Nos.)

Dismantling of LT LAS (3 Nos.)

Dismantling of conductor 7/2.50 or 7/2.59 (Weasel)

Dismantling of conductor 7/3.15 or 7/3.35 (Rabbit)

Dismantling of conductor 7/4.09 (Raccoon)

Dismantling of conductor 6/4.72 + 7/1.57 (Dog)

Dismantling of split neutral guarding

Dismantling of flat guarding with 4 wire (11 KV or 22 KV)

Dismantling of top channel from double pole DT structure

Dismantling of bed channel from double pole DT structure

Dismantling of cross with stud for bed channel from double pole DT structure

Dismantling of belting angle and HG fuse angle from double pole DT structure

Dismantling of AB switch, horizontal, double pole

Dismantling of HG fuse set complete from double pole DT structure

Dismantling of feeding arrangements with open type fuse unit from double pole DT structure

Dismantling of HT & LT LAS from double pole DT structure

Dismantling of support insulator angle and 3 Nos. pin insulators from double pole DT structure

Dismantling of single pole structure

Dismantling of single pole mounted GOS switch

Dismantling of single pole HG fuse set, solid core type

Dismantling of HT LAS from single pole DT structure

Dismantling of LT LAS from single pole DT structure

Dismantling of stay set from single pole DT structure

Dismantling of special DT centre support set from single pole DT structure

Dismantling of earthing complete from DT structure (single pole / double pole)

Dismantling of DT metering (Whole Current Meter) arrangements (including dismantling of DT Meter Box)

Dismantling of DT metering (LTCT Meter) arrangements (including dismantling of DT Meter Box)

Dismantling of modem including accessories

Dismantling of transformer from structure - below 200 KVA

Dismantling of transformer from structure - 200 KVA & above but below 500 KVA

Dismantling of transformer from structure - 500 KVA

Manufacturing and supply of special type clamps for rail poles, RS joists, tubular poles, distribution transformer strucutres with material

Drilling of hole 3/4 or 1 inch in channel, angles, etc. per hole

Cutting of flat per cutting

Cutting of channel per cutting

Cutting of angle per cutting

Cutting of pipe per cutting

Alteration of back clamp to suit works

Alteration of stay clamp to suit works

Fixing of new street light fittings

Fixing of new Sodium / Mercury lamp fittings

Street light switch box erection complete with pipe provision

Dismantling of new street light fittings

Dismantling of new Sodium / Mercury lamp fittings

Dismantling of street light switch box with pipe

Erection of metering set 11 KV / 22 KV / 33 KV

Dismantling of metering set 11 KV / 22 KV / 33 KV

TI fitting welding with clamps

Cutting of RS joist pole

Welding in RS joist pole

New service connection wires dismantling and re-errection for Single Phase Service

New service connection wires dismantling and re-errection for Three Phase Service

Releasing of Single Phase Meter and refixing (for works not covered under HQ schemes)

Releasing of Three Phase Meter and refixing (for works not covered under HQ schemes)

Destruction of pole concreting at site

Retrieving grill from deteriorated RCC pole

Painting (2 coats) of Distribution Transformer below 100 KVA

Painting (2 coats) of Distribution Transformer 100 KVA & above upto 250 KVA

Painting (2 coats) of Distribution Transformer above 250 KVA

Painting of RSJ tubular pole includng cross arm, TI fittings - single coating

Painting of pole at ground

Numbering of pole with black back ground and yellow letters including cost of paint per pole

Painting of transformer structure poles with two coats for each structure

Painting of service connection details in Meter Board / Agricultural services / Hut service door including cost of Paint and Brush

Replacement of earthpipe per loc

Re-earthing of structure completely

Cleaning of DT yard

Cleaning of RMU

Cleaning of ring fencing

Setting right the leaning pole in HT/LT at pin point location

Setting right the leaning pole in HT/LT at cut point location

Resagging of lines for all sizes at cutpoint location per wire / span

Clearing of branches of trees

Providing LT spacers - single phase line

Providing LT spacers - three phase line

Erection of LT Shunt Capacitor including transport