Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹58.1 Laccepted-aoc | accepted-aoc |
Tender Value
₹69.3 L
EMD Value
₹1.4 L
Closing Date
21 Nov 2025, 11:00 pmClosed
Directorate of Municipal Administration
GH NAGARAJU
Improvement of Asphalt road from Jalahalli hundi Cross up to Ramasamudra via VHP School in CMC limits of Chamarajanagar
DMA/2025-26/OW/WORK_INDENT41612/CALL-3
DMA/2025-26/OW/WORK_INDENT41612/CALL-3
Open
Other Works
Two Tender Document System(Two Cover)
DMA City Municipal Council Chamarajanagara
9 documents required · 9 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Total value of civl engineering works executed and payments received in the last five years (year-wise)
3.2(b)To qualify for award of this contract, each Tenderer in its name should have in the last five years that is during the period from 2020-21 to 2024-25 satisfactorily completed(at least 90 percent of the contract value) as prime contractor at least one similar work such as any similar road work of value not less than Rs. 35.00.
3.2(c)To qualify for award of this contract, each Tenderer in its name should have in the last five years that is during the period from 2020-21 to 2024-25 executed in any one year (or continuous period of 12 months) the following minimum quantities of work:(1)GSB/WMM:481.00 Cum(2)BM/BC/SDBC/Graded Premix Surfacing/Mixed Seal Surface:276.00 Cum
List of existing commitments and ongoing works
3.2(a)To qualify for award of this contract, each Tenderer in its name should have in the last five years that is during the period from 2020-21 to 2024-25 achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs. 140.00 lakhs(Turnover certificate duly certified by chartered Accountant (along with UDIN No) shall be furnished.
3.3(a)Each tenderer should further demonstrate liquid assets and or availability of credit facilities of not less than Rs 21.00 Lakhs in the form of an Unconditional Credit lines/ letters of credit/ certificates from banks for meeting the fund requirement in the format given in the bid document
Reports on the financial standing of the tenderer, such as profit and loss statements and balance sheet for the last five years
List of works for which tenders already submitted
₹1,740
₹1.4 L
3 Nov 2025
3 Nov 2025
24 Nov 2025
15 Nov 2025
Improvement of Asphalt road from Jalahalli hundi road to via VHP School and upto Ramasamudra road CMC Limits in Chamarajanagara.
Patching of Deep Potholes 75mm thick by restoring the Granular Base course using material confirming to WBM Grade -I with 1ype Sereenings standards wherever necessary by manual 1ype Sereenings standar...
Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead.((Common SR-2023-24, Vol...
Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacte...
Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading...
Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on p...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Construction of Subgrade and Earthen Shoulders Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading,...
Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90 kg per m2 using mecha...
Providing and laying Bituminous Macadam with 120 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG30 @ 3.4% by weight of mix, trans...
Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom. Tack coat ...
Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight ...
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/ m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IR...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
41612-Call-3 KW-3 Finalized 03-11-2025.docx
Tender Document • 1.10 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .