Hermetically sealed scroll type compressor using R-22 refrigerant gas , working on 3 Phase 415V AC 50Hz , Suitable for use in ICF type RMPU AC Coaches,confirming to RDSO Spec no. ELPS/SPEC/AC/03(Rev- 2) May-2009 with amendment No. 1 & 2. Accepted Make & Model No.: RDSO Approved Model no. ZR 61 KC TFD 522 of M/s Copeland make only.

The entire quantity will be procured on nomination basis from RDSO approved/nominated make i.e. M/s Copeland Make approved in the RDSO letter No.EL/7.2.2 dated: 20-11-2024 & The item is reflected at Sr no. 1 of the Bill Of Material (BOM) of RDSO spec no. ELPS/SPEC/AC/03 (Rev-2) May 2009 with Amendment no. 1 & 2. , a Copy of BOM is attached. Accepted Make & Model No.: RDSO Approved Model no. ZR 61 KC TFD 522 of M/s Copeland make only

Firms who are participating as an authorized dealer of OEM of RDSO approved/nominated make i.e. Copeland approved in the RDSO letter No.EL/7.2.2 dated: 20-11-2024 & The item is reflected at Sr no. 1 of the Bill Of Material (BOM) of RDSO spec no. ELPS/SPEC/AC/03 (Rev-2) May 2009 with Amendment no. 1 & 2. , a copy of BOM is attached., are required to submit the TENDER SPECIFIC AUTHORIZATION letter from their manufacturer on their letterhead along with the tender. Non-submission of valid TENDER SPECIFIC AUTHORIZATION letter of OEM will make their offer invalid and offer will be SUMMARILY REJECTED. Accepted Make & Model No.: RDSO Approved Model no. ZR 61 KC TFD 522 of M/s Copeland make only

EMD condition: All bidder who are exempted to submit EMD as per Clause 3.1.1 of Section-I of NWR Tender document, are required to sign Bid Security Declaration as mentioned in clause 3.1.5. Submission of offer by such exempted bidders will be considered that they have signed the above bid security declaration. Bidders who are not exempted to submit EMD and bidders who are under disqualification for EMD exemption, are mandatorily required to submit EMD (online) as mentioned in Tender NIT.

I/We agree to supply the tendered stores at the rates quoted by me/us in accordance with the IRS Conditions of Contract and [or] Special and [or] other Conditions specified/attached with the tender.

I/We also confirm that Rates and other financial terms quoted in relevant columns of financial bid will only be ruling terms for acceptance. Such terms quoted anywhere else should be ignored.[Denial of this condition not recommended]

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

Inspection by TPI against GC TC/WTC of OEM.

Para 5.3 of section I of NWR Tender document will not be applicable in this tender, since it is a nomination based tender for make Emerson (approved by RDSO).

SD Condition: The Amount of SD (wherever applicable) will be 5% of contract value subjected to maximum of Rs. 50 lakh. Other conditions of Security deposit will be applicable as Clause 12 of Section-II of NWR tender conditions

Micro and Small Enterprises firms In order to avail themselves of benefits and preferential treatments, the MSEs must be registered with any of the following: - (a) UDYAM (UDYAM Registration Certificate). (b) Udyog Aadhar Memorandum (Note :- Terminal date for consideration of this certificate was till 30.06.2022 or as extended by Ministry of Micro, Small & Medium Enterprises from time to time. Thus this certificate (Udyog A a d h a r Memorandum) can only be considered if the above terminal date is further extended beyond 30.06.2022). MSEs registered with above agency/agencies must attach (in the template - "Attach Documents" on "Techno-Commercial Bid Details form", as scanned copy in PDF format) their current & valid registration certificate along with their offer. Other Conditions shall be as per Para 4 of Section-I of NWR tender condition document.

Tenderer should mention in their offer: - 1. Name of manufacture with complete address. 2. Place of inspection be indicated with complete address, option for inspections at godowns/outstation/multiple places be strictly avoided, and preferably be permitted only at manufacturers place