22/EUDC-IN/2025-26

Amount

Carriage, loading-unloading with proper stacking of following material from Central Store /department store to Site distance approx 20 Km.

ST Pole 11 Mtr. Long

PCC Pole 8.5 Mtr long

ABC (3x95+1x70+1x16) / (3x120+1x95+1x16) Sqmm

11 KV Pin Insulator

11 KV (3X70/120/185)/(1x630) XLPE

11 KV O/D JOINTING KIT 3X70/120/185

LT Cable (1x240/400/630) Sqmm.

Laying of PVC Cable (1x240/400/630)/ (3.5x240/400/630) Sqmm.Sqmm cable with Material. (Only Cable shall be supplied by department)

Laying of (3X70/120/185)/(1x630) XLPE cable by manual method

Removal of of ABC from both side spans of damaged pole and removal of H.T/L.T line accessories from damaged pole.

Digging of pit of damaged pole in Pakka road (Hard soil) with the help of road cutter/digging machine, Tractor etc. for dismantling the pole.

Digging of pit of damaged pole in Kachha side road (soft soil) for dismantling the damaged pole.

Carriage of PCC Pole/S.T Pole from site to S/S after dismantling including loading & unloading at both ends.

Fabrication, erection of single 9/11 Mtr ST/8.5 PCC Pole with fixing of necessary clamps, accessories required including supply & fixing of clamp, nuts & bolts, Grouting with cement, sand, brick ballast in ratio :1:4:8 and earthing as per RESPO specification & direction of E/I with fixing of T-off with fitting & tapping pole. (Only Pole shall be Supplied by the deptt.)

Re-laying and resagging ofABC/ ACSR Dog/Rabbit/Racoon conductor in both side spans of new erected pole in H.T/L.T line.

Stringing & sagging of AB Cable (3x95+1x70+1x16) /(3x120+1x95+1x16) Sqmm with proper jumpring and connections with required Clamps, jumpers, piering connector. (Cost of clamps etc. shall be borne by contractor) (Only Cable shall be supplied by department)

Construction of Transformer plinth of size 2x2x1.5 meter with the help of first class brick and masonry in the ratio 1:4 cement & sand coare. Filling the structure completely as per norms with RCC top 1:1:2 cement, sand coarse and stone grith with MS Bar and MS channel for resting transformer wheel 2x(125x65x2000)mm and plaster. (All material shall be arranged by the contractor.)

Construction of Masonary type Distribution Pilar Box (All material shall be supplied by the contractor.)

Providing and Fixing of M.S. channel

Making of bus-bar on double pole with the help of M.S. channel, M.S. T-off, pin & pin insulator

Grouting of ST/PCC pole

Providing and fixing of TPMO

Providing and fixing DO fuse set

`Providing and fixing Nut and bolts

Providing & Fixing of Suspension clamps (Insulated) with bolts & nut.

Providing & Fixing of Dead End clamps (Insulated) with bolts & nut.

Fixing of Distribution Box with proper clamps, nuts and bolts & taking connection from ABC to distribution for supply.

Painting of ST/PCC pole

Earthing of poles as per RESPO Norms with earth rod (All the material supplied by the contractor )

Providing and fixing of danger board

Providing and fixing ALU LUG 240 SQMM

Providing and fixing of stone pad

Safely opening of fencing at LT Sub-station where transformer has been damaged for making passage for safe loading and uploading of transformer and again fixing of opened fencing with some minor repairing works as per site requirement, after energisation of transformer so that sub-station is securely fenced.

Cartage of transformer trolly having 630/400/250 KVA transformer within the jurisdiction of EUDD Munshipulia to the site of damage of transformer with disconnecting the HT/LT connections of damaged transformer with reconnection of HT/LT of transformer trolly, alongwith earthing of trolly, transformer and neutral.

P.S. ENTERPRISES (BID ID -5539849)

A.A. ENGINEERING CO. (BID ID -5541318)