Construction of B.Ed. Achievement wall (Selfie Point) at Bundelkhand University Jhansi (U.P.).

Demolishing brick work manually/ by mechanical means includingstacking of serviceable material and disposal of unserviceable materialwithin 50 metres lead as per direction of Engineer-in-charge.In cement mortar

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinthlevel up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate20 mm nominal size derived from natural sources).

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. (TMT Bars) Fe-500

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and laying damp-proof course 40mm thick with cementconcrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from naturalsources : 4 graded stone aggregate 12.5mm nominal size derived fromnatural sources)

Providing & applying a coat of residual petroleum bitumen of grade ofVG-10 of approved quality using 1.7kg per square metre on damp proofcourse after cleaning the surface with brushes and finally with apieceof cloth lightly soaked in kerosene oil.

Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in superstructure above plinth level up to floor V level inall shapes and sizes in :

15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)

Providing and fixing machine cut, mirror/ eggshell polished work for wall lining (veneer work) including dado, skirting, risers ofsteps etc., in required design and pattern (if required with marble stoneslab pieces of different shapes, sizes & texture but of even thickness) on12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand)laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade,including rubbing, curing, polishing etc. all complete as per Architecturaldrawings, and as directed by the Engineer-in-Charge. Italian Marble,Perlato, Rosso verona,Fire Red or Dark Emperadore etc.

Providing And Laying 3d Signage S.S Letter With Golden Paint As Per Architectural Drawings Complete WALL OF FAME SIZE 150MM, BUNDELKHAND UNIVERSITY,JHANSHI (UP) SIZE 200MM, INAAC A++ Category 1 UPSEE BEd 2025 NIRF ranking ANRF IIRF ranking Times ranking QS ranking SIZE 150MM, प्रोOमुकेश पांडे कुलपति, SIZE 150MM, प्रोOडीOकेO भट्ट संपत्ति अधिकारी,विनय कुमार सिंह कुल सचिव,पीOकेOसिंह वित्त अधिकारी,वसी मोहम्मद पूर्व वित्त अधिकारी,राजबहादुर परीक्षा नियंत्रक SIZE 100MM, University Logo DIA 600 MM

Providing and laying Decorative flower pot 150 mm dia

Providing and laying Decorative flower pot 250 mm dia

Supply and laying of 16 sqmm 4 core aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.

Supply and burning of safe earthing electrode T-19 Zn-Zinc coated, length up to 2000 mm., cuter pipe 48.4 mm. x 3.2 mm., inner pipe 26.9mm.x2.6 mm., terminal dia. 12 mm., coating 80-100 micron filled with crystallinc conductive mixture (CCM) having anti corrosive & conducti properly with 50 kgs. activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonry housing. (From electrode terminal to switch board, cost of 25x3 G.I. strip will be extra). Make: As approved in

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect. SI No. 717

Supply and fixing of factory wired integral LED focuse light luminaries with die cast aluminium housing built with dirver set suitable for 170 To 200 watt. Confirming to IP-66 protection complete in all repect

Supply and fixing of factory wired integral LED focuse light luminaries with die cast aluminium housing built with dirver set suitable for 75 To 100 watt. Confirming to IP-66 protection complete in all repect

Supply and fixing of factory wired integral profile lights protection complete in all repect

Supply and Fixding Following Capacity of automatic street light cubicle control panal painted eac with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC Fuse, isolating switch Metering instrument & instrument box with CTs etc. in case of TPN, Complete in all respect. 40 A TPN.

Supply and fixing of R.G.B focuse light luminaries with die cast aluminium housing built with dirver set suitable. Confirming to IP-66 protection complete in all repect

Supply and fixing of 750MM Hight brass/stainles steel made 100 mm dia decorative pole with stand and dash fastner work complete proper completion of the work

Supply and fixing of decorative brass painted decorative chain in three rows for fencing work complete proper completion of the work

Provinding and fixing of silanyas bord made with granite stone with letter engraving university achivment complete