MISC. WORK AT CADUP

Amount

Wiring for light point/fan point/exhaust fan point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor singtle core cable etc. as required.

Wiring for light/power plug with 2x4 sq.mm. FRLS PVC insulated copper conductor single core cable in surface/ recess medium class PVC conduit alongwith 1 No. 4 sq.mm. FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/submain wiring 2x6 sq.mm. wiring alongwith 1x6 sq.mm. earth wire FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit as required.

Wiring for circuit/submain 2x2.5sq.mm. wiring alongwith 1x2.5 sq.mm. earth wire

Supplying and fixing 12 Way double door single pole and neutral, sheet steel, MCB distribution board, 240V on surface/recess complete with tinned copper bus bar, neutral busbar, earth bar, din bar, inter connections power painted including earthing etc. as required.

Supplying and fixing 4 Way horizontal type three pole and neutral, sheet steel MCB distribution board, 415V on surface/recess, dinbar, inter connections, powder painted including earthing etc. as required (but without MCB/RCCB/ Isolator)

Supplying and fixing 5A to 32A rating 240/415V, 10KA "C' Curve miniature circuit bracker suitable for inductive load of single poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing of 63 Amp. 4 Pole, 415V Isolator in the existing MCB DB complete with connections testing and commissioning etc. as required.

Supplying and fixing of 100 Amp. 4 Pole, 415V Isolator in the existing MCB DB complete with connections testing and commissioning etc. as required.

Supplying and fixing DP sheet steel enclosure on surface/recess alongwith 25/32A 240V 'C' curve DP MCB complete with connections, testing and commissioning as required.

S&F of 5 Amp. swtich F/T approved make

S&F of 5 Amp. socket F/T approved make

S&F of 16 Amp. swtich F/T approved make

S&F of 16 Amp. socket F/T approved make

Supply and fixing of 36 Watt indoor recess mounting of LED square fitting complete in all respect make.

Supply and fixing of 18 Watt indoor recess mounting of LED Round fitting complete in all respect make.

S&F of fresh air fan 300mm dia make : Havells or equivalent.

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100Volts grade 25 sq.mm. 3½ core

Supply and fixing of wall fan 400mm dia Havells Platina high speed

Providing and fixing automatic sliding door machine Dorma/Ozon make or equivalent including of all material, labour T&P etc. complete.

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately)

Extraction, rebinding and lowering of bore well motor at Hind Nagar residential colony including all material, labour T&P etc. complete.

Supply and fixing electrical pannel including isolator and wire all material, labour T&P etc. complete.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and sutable locking arrengement and making necessary holes for inlet, outlet and overflow pipes but without fittings and base sapport for tank.

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held in position by criss crossing GI wire etc. complete as per directions of Engineer-in-Charge. (In Security Room)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1 :2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) (Around Security Room)

Cleaing of Sofa including labour, material etc. complete.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange f1Xed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x1 Ox0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling f1Xed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws@ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c:Jc, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with

Suply and fixing of wash basin vanity including labour, material etc. complete.

Suply and fixing of Name Plate Board and LOGO including labour, material etc. complete.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. (Admin)

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing wall with primium acrylic Smooth exterior paint of Required Shade old work ( two or more coats applied @ 1.43/10Sqm)

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour..

M/S GOMDHARI (BID ID -4838954)

M/S PUSHPA ASSOCIATES (BID ID -4839090)