Installation,testing and commissioning of fire fighting system at hospital of mental health and rehabilitation centre at Shimla

Amount

Hydrant (Main Pump set) : Supplying , Installation,Testing and Commissioning of electric Driven Main hydrant Pump set suitable for automatic operation consisting of following complete in all respect with following specifications as required :-

(i) Horizontal type, centrifugal ,Split casing pump of cast iron body and bronze impeller with stain less steel shaft, mechanical seal and farthest outlet at specified flow of 1620 LPM and 56 Metre head conforming to IS 1520 ( The pump should be capable of delivering 150% rated discharge at a head not less than 65% of the rated head)

(ii) Suitable HP SQ cage induction motor 30 HP, TEFC Synchronous speed 2900 RPM suitable for operation on 415 volts. 3 phase 50 Hz. AC with IP 55 protection for enclosure. Horizontal foot mounted type withClass-F insulation Class F , conforming to IS-325,

(iii) M S fabricated common base plate, coupling,couplingguard, foundation bolts ect.as requried.

(iv) Suitable CC foundation of 1:2:4 ratio (1 cement; 2coarse sand :4 grade stone aggregate 40 mm nominal size) duly plastered and with anti vibration pads.

Jockey Pump (Wet Riser System) Supply, Installation, Testing and Commissioning of electrical driven jockey pump (meant for hydrants) suitable for automatic operations, consisting of the following, conforming to specifications attached. (A) Horizontal mounting, End Suction type centrifugal pump with cast iron body and bronze impeller with steel shaft of C-40 grade, capable of discharging 180 litres / minute of water at 56 metres head to give a pressure of not less than 3.5 Kg/Sq cm at topmost Hydrant point. (Confirming to IS-1520) 11KW/15 HP Capacity Two pole totally enclosed fan cooled type squirrel cage A.C. induction motor suitable for 3 phase, 415 V +/-10%, 50 Hz +/- 5% A.C. supply, with IP 55 protection for enclosure, horizontal mounted type with 'F' class insulation (Confirming to IS-325) (Make : M/s. Kirloskar,ABB,Crompton. frame size 160 or similar superior approved make).

Providing, laying, jointing and testing in following sizes of MS Class 'C' (heavy class) pipes Conforming to IS: 1239/3589 with accessories like fittings including tees, elbows, reducers, flanges gaskets, G.I. nus, blots complete with all accessories as required.

25 mm dia.

80 mm dia.

100 mm dia.

150 mm dia.

Proviidng ,Installing and commissioning of First Aid hose reel with MS Construstion spray painted in post office red (swinging type hose reel drum) Conforming tp IS 884 with upto date amendments complete with 30 mtr long and 20 mm nominal internal dia heavy duty rwater hose thermoplastic (Teitile reinforced )type II, 20 mm dia globe valve stop cock. Tetrminating with G.M. coupling & nozzle of 6mm outlet with shut off valve complete as required.

Supply, installation, testing & commissioning of : Stainless Steel ISI marked Single Headed odlique pattern hydrant landing valve with 80 mm dia flanged inlet and 63 mm dia instantaneous type female outlet complete with cap and G.I. chain, twist release type plug and all accessories as per IS: 5290-1983 (Type 'A')

Providing, fixing of 63 mm dia, 15 mtr long non-percolating flexible hose (RRL- type A) as per IS : 636, Type A with Stainless Steel male & female instantaneous type coupling (IS 903).

Providing & fixing 63 mm dia Stainless Steel Braneh pipe with with 20 mm (nominal internal dia) Size Stainless Steel Nozzle with standard inlet instandenous lack type 63 mm dia Coupling Branch Pipe & Nozzle shalll Confirm I.S 903.

Providing &fixing fibre glass reinforced Fire Hose Box Cabinet( 30"x24"x10"), 3mm thick 18SWG CR Sheet out door type, made out of sheet having glazed door with 6mm thick clear Glass including necessary Locking arrangement with allen Key, powder coating with Post Office Red Paint, suitable to accommodate 2 lengths of 15mtrHoses & 1 No Branch pipe with Nozzle including grounding and suitable inscripting the words" Hose Cabinet" on the Box complete as requried.

Providing 4-Way Collecting Breaching head-PCD 240mm with 63 mm dia instantaneous type inlet +150 mm dia flanged outlet with built incheck valve for fire brigade connection to UG Tank +wet riser I.S 904 specification test for 20kg/mm2 including necessary support complete in all respect.

Providing Cast iron /steel Butterfly Valve Confirming to type P.N 1.6 of I.S 13095-1991 Complete with Flanges bolt ,nuts ,gasket etc. As per table 'E' specification complete in all respect hydraulically test to 20 K./sqcm.

80 mm dia.

100 mm dia.

150 mm dia

Providing and fixing Cast Cast Iron/steel double flanged horizontal type with gunmetal seat non-return valve confirming to class - I of IS : 5312 including nuts, bolts, 1.5 mm thick compressed asbestos gasket as per table "E" and specifications complete in all respect.

80 mm dia.

100 mm dia.

150 mm dia.

Fabricating ,Supplying, installation, testing and commissioning of cubical construction floor mounted type, fabricating from 2 mm thick CRCA sheet compartmentalised withhinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter connection, having swichgear and accessories mounting and internal wiring, earth terminal numbering etc complete in all respect suitable for operation on 415 V .Three Phase, 50 Hz, Ac supply withencloser protection class IP 42 as required.

Incomer

OUTING

Mains Fire pump.

iii)Pump on LED Induication Lamp -1 No

b) Jockey pump.

iii)Pump on LED Induication Lamp -1 No

Providing, fixing, testing and commissioning of MS air cushion tank on pump House fabricated form 6mm thick MS plate, 250 mm in diameter and 2 m in height with dished ends fabricated from 8 mm thick MS plate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm dia valve, pressure gauge with gun metal stop cock complete with all accessories as required and including all lead and lift.

Supply, Installing, testing and commissioning of ISI make 100mm dial type pressure gauge gate valve with all accessories as requried and including all lead and lift.

Supply, Installing, testing and commissioning of ISI make Pressure switchs for Main, Jockey, and staind by Diesel pumps including necessary wiring up to control panel and Ball valve. complete in all respect.And including all lead and lift.

Supply, Installing, testing and commissioning of 25mm dia gate valve with all accessories as requried.

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheatthed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc.of the required size.

Armoured cable 50 sq. mm ( 3.5 core)

Providing and installation of PVC water storage tank of 10,000 litre capacity including CC platform foundation for water tank complete in all respect.

HIMACHAL FIRE CONSULTANTS AND ENGINEERS

KHARBANDA ELECTRICALS