81272/E8 SPECIAL REPAIR/ REPLACEMENT OF BER/ OLD VINTAGE 02 Nos STRECHER CUM PASSENGER LIFT AND 01 No SERVICE LIFTAT INHS UNDER AGE E/M-I OF GE MINNIEBAY, SRI VIJAY PURAM.

Supply, installation, testing & commissioning of following capacity 20 passengers/1360 Kgs cum bed (Stretcher-cum-passenger) lift machine room less (MRL) bed lift with regenerative drive suitable for hospital standards and as per latest BIS Codes, NBC 2016 as amended upto date having provision for barrier free access as per harmonised guidelines & standards for universal accessibility in India-2021 of MoHUA, serving different floors in the lift shaft as per detailed specifications enclosed and as under including all other equipment and accessories complete as required :- (i) Speed: 1.5/1.25 MPS (ii) Floors: 4(G+3) (iii) Travel: As per OEM design suitable for existing site. (iv) Stops & opening : 4 stops and 4 openings (v) Controller: AC variable voltage & variable frequency (vi) Automatic rescue device (ARD) complete with dry maintenance free batteries as required.

(vii) Operation: Microprocessor based single automatic push button/simplex selective collective/duplex collective selective with/without attendant (viii) Power: 415 Volts +10%, 3 phase, 50 Hz, 4 wires system (ix) Car Enclosure: Stainless steel scratch proof (Moon Rock/Honeycomb/ Hairline Finish) on all sides and stainless steel decorative ceiling with fans (indirect throw) and LED fitting. (x) The car flooring should be smooth and antiskid as approved by Engineer-in-charge. (xi) Type of doors:- (a) Car: Power operated, centre opening horizontal sliding stainless steel scratch proof (Moon Rock/ Honeycomb/ Hairline Finish). (b) Landing doors: stainless steel scratch proof . (xii) A hand rail not less that 600mm long at 900mm above floor level to be fixed adjacent to control panel in the lift car. (xiii) Voice announcement system in the car to announce the position of the elevator in the hoist way as the car passes or stops at floor served by the elevator.

(xiv) Closed loop control system, protection against power fluctuation, self diagnostic control, landing doors 2 hours Fire rated, overload detection and protection, overspeed governer, dot matrix LED D & P indicators in car & landings, BMS compatibility, tamper proof infrared curtain covering almost the entire height of the lift car door, Alarm horn, Anti Nuisance Operation, CCTV camera system with 4 MP IP camera, suitable NVR and HDD for 30 days storage backup , Firemen switch, 2/3 way intercom, Emergency Stop Switch with battery backup for fan and light fitting for 1 hour, pit ladder. (xv) The lift doors shall have a vision panel to enable persons with hearing impairment to signal for help or assistance in the event of an emergency. (xvi)An appropriate technological support be provided (Through emergency messaging |services or alarms etc.) to respond to the emergency requirements of person with hearing impairment or deafness. (xvii) In case of failure of ARD or other electronic devices, a provision of manual rescue be provided.

Supply, installation, testing & commissioning of following capacity 20 passengers/ 1360 Kgs cum (Service) lift machine room less (MRL) service lift with regenerative drive suitable for hospital standards and as per latest BIS Codes, NBC 2016 as amended upto date having provision for barrier free access as per harmonised guidelines & standards for universal accessibility in India -2021 of MoHUA, serving different floors in the lift shaft as per detailed specifications enclosed and as under including all other equipment and accessories complete as required :- (i) Speed: 1/1.25 MPS (ii) Floors: 3(G+2) (iii) Travel: As per OEM design suitable for existing site. (iv) Stops & opening : 4 stops and 4 openings (v) Controller: A.C. variable voltage & variable frequency (vi) Automatic rescue device (ARD) complete with dry maintenance free batteries as required. (vii) Operation: Microprocessor based single automatic push button/simplex selective collective/duplex collective selective with/without attendant (viii) Power: 415 Volts +10%, 3 phase, 50 Hz, 4 wires system (ix) Car Enclosure: Stainless steel scratch proof (Moon Rock/Honeycomb/ Hairline Finish) on all sides and stainless steel decorative ceiling with fans (indirect throw) and LED fitting. (x) The car flooring should be smooth and antiskid as approved by engineer-in-charge. (xi) Type of doors:-

(a) Car: Power operated, centre opening horizontal sliding stainless steel scratch proof (Moon Rock/Honeycomb/ Hairline Finish). (b) Landing doors: stainless steel scratch proof . (xii) A hand rail not less that 600mm long at 900mm above floor level to be fixed adjacent to control panel in the lift car. (xiii) Voice announcement system in the car to announce the position of the elevator in the hoist way as the car passes or stops at floor served by the elevator. (xiv) Closed loop Control System, protection against power fluctuation, self diagnostic control, Landing doors 2 hours Fire rated, Overload detection and protection, Overspeed Governer, Dot Matrix LED D & P Indicators In Car &Landings, BMS Compatibility, tamper proof infrared curtain covering almost the entire height of the lift car door, Alarm horn, Anti Nuisance Operation, CCTV camera system with 4 MP IP camera, suitable NVR and HDD for 30 days storage backup , Firemen switch, 2/3 way intercom, Emergency Stop Switch with battery backup for fan and light fitting for 1 hour, pit ladder. (xv) The lift doors shall have a vision panel to enable persons with hearing impairment to signal for help or assistance in the event of an emergency.