Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.0 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹31.8 L+₹2,999.50 (0.09%)Rejected-Finance MOURYA HEIGHTS SATAVNAGAR HANDEWADI ROAD HADAPSAR PUNE 28 | PUNE | MAHARASHTRA | 411028 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹32.2 L+₹42,817 (1.35%)Rejected-Finance B 1 2 MAHESH NAGAR AMBALA CANTT 133001 HRY | AMBALA CANTT | AMBALA | HARYANA | 133001 | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹32.7 L+₹87,144.50 (2.74%)Rejected-Finance FLAT NO A 15 ARCHANA GREEN SOCIETY NIBM ROAD KONDHWA PUNE 411048 | PUNE | MAHARASHTRA | 411048 | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹34.8 L+₹3.0 L (9.43%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
Tender Value
₹43.7 L
EMD Value
₹87,400
Closing Date
8 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH PUNE
Garrison Engineer North General Cariappa Marg Camp Pune 411001
GE (N) P/TOKEN- 03 OF 2023-2024CERTAIN SPL REPAIR WORK AND MW WORKS IN THE AREA OF AGE B/R (EAST) UNDER GE (N) PUNE
2023_MES_589009_1
GE (N) P/TOKEN- 03 OF 2023-2024
Open Tender
Civil Works
Item Rate
270 days
GE NORTH PUNE
Refer tender documents.
8 documents required · 8 mandatory
₹500
GE NORTH PUNE
₹87,400
Yes
1 Jul 2023
11 Apr 2023
15 May 2023
11 Apr 2023
8 May 2023
25 Apr 2023
12 Apr 2023 - 18 Apr 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for 25mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregates) as in sub base, levelling course etc complete all as specified and directed.
M&L for vitrified colour ceramic light shade tiles 10 mm thick, area of each tiles exceeding 0.18 sqm but n.exc 0.36 sqm in floors set & jointed in neat cement slurry & pointed in coloured cement to match including 20 mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for vitrified colour ceramic light shade tiles 10 mm thick, area of each tiles exceeding 0.18 sqm but n.exc 0.36 sqm in Skirting /dado set & jointed in neat cement slurry & pointed in coloured cement to match including 10 mm thick back coat in CM 1:3 complete all as specified and directed.
M&L non-skid coloured ceramic tiles 7 to 8mm thick joint free (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified.
M&L for coloured Non skid ceramic tiles of size 300 mm x 300mm x 7 to 8 mm thick in floors, etc, colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles , over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.
M&L glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:3 complete all as specified and directed.. Make : Kajaria /NITCO/Johnson.
M&L glazed ceramic coloured tiles of size 300 x 200 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:3 complete all as specified and directed.
Demolition of RCC in ground floors and pavings n exc 15 cm thickness (below or above ground level) as in Kitchen platform, shelfs etc complete all as specified and directed.
M&L Granite (of any type), 18- 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform,WHB plateform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade including making full curving the edges and dismantling existing slab complete all as specified and directed.
M&L for machine cut 20mm to 25mm thick polished cudappah stone slab as in shelves, partitions, cooking platform below granite stone and like including necessary jointing and pointing and making good to disturbed surface complete incl dismantling existing slab all as specified and directed
M & L for Anti termite treatment of soil under existing floors using Chloropyriphos 2% EC emulsion at the rate 1 liter per hole, 300mm apart including drilling & plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.
M & L for Anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion at the rate of 2.25 litres per linear metre incl drilling and plugging holes etc in apron.to match the existing floors complete all as specified and directed.
S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing as specified. Make: JINDAL, TATA, RAVINDRA
S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing as specified. Make: JINDAL, TATA, RAVINDRA
M&L cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth all as specified.
S&F in repairs Vitreous China wash down water closet pan (pedestel pattern) ETWC white, including trap connection to drain (outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC jet for Pedestal pattern pan and plastic water closet seat of white in colour, back closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified. Make : Cera/Prayag/Johnson Pedder.
S&F in repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest ( excluding flushing cistern and flush pipe), including long Arm P-trap (CI) 100 mm dia of lenght up to 700 mm or as per site requirement ,complete including making good to floor complete all as specified and directed.. Make : Cera/Prayag/Johnson Pedder.
S&F in repair dual flush 5&10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle including brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified and directed.. Make : Cera/Prayag/Johnson Pedder.
S & F vitreous china table top basinThin rim round in shape of size 360x360x120mm excluding taps but incl necessary brackets CP brass wastes coupling and other fittings all as specified. Make: Jaquar Cat No.SLS-WHT-6905
S&F in repair 15mm dia brass chromium plated fancy type, pillar tap with extension body with fly nuts capstan head screwed down high pressure with or Without lettered hot or cold with long scewed shank complete all as specified and directed.. Make: Jaquar Cat No.VGP-81021N
S&F in repair PVC connection 15mm bore size with PTMT nuts and washers of length 450mm all as specified. Make : Prayag/Polytuff.
S&F in repair Cabinet mirror plastic body for toilet of size 350mmx450mm with 4mm thick looking mirror complete all as specified.Make : Prayag/Polytuff.
S&F in repair Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm complete all as specified and directed.. make. Bluestar/Nirali
S&F stainless steel, sink 1 mm thick for kitchen or laboratory, with plugs, waste pipe, washers; incl bedding in cement mortar on to dwarf wall connecting union etc & connecting to inlet/out let for smooth functioning size of sink 495 x 420mm overall and bowl size 410mmx330mmx160mm, including PVC connection, CP waste coupling, etc. complete all as specified and directed. by Engr-in-Charge. make. Bluestar/Nirali
S&F in repairt stainless steel plate rack of size 787mm X 914mm X 254 mm complete all as specified and directed. CAT PART NO:- P-348 of Pryag or of equivalent make as per Appx 'A' as approved by GE
S&F in repairs hand shower (health faucet) of ABS body with 1.0m long easy flexible tube in chrome finish and wall hook complete all as specified and directed by Engr-in-charge. Make : Jaquar Cat No ALE-ESS-585 or of equivalent make as per Appx 'A' as approved by GE
S & F in repair brass Chromium plated soap dish , fixed to wall with CP brass screws, all as specified and directed. Make: Johnson Fusion series Cat part No: T3252C or of equivalent make as per Appx 'A' as approved by GE
S & F in repair Brass Chromium plated towel rail complete all as specified and directed.. Make: Johnson Fusion series Cat part No: T1350C or of equivalent make as per Appx 'A' as approved by GE
S&F in repair Brass Chromium plated towel ring complete all as specified and directed.. Make: Johnson Fusion series Cat part No: T1351C or of equivalent make as per Appx 'A' as approved by GE
S&F in repairs Bib Cock long nose quarter turn suitable for 15mm bore pipe long body with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete all as specified and directed.. Johnson VIVA new series Cat part No: T4806C or of equivalent make as per Appx 'A' as approved by GE
S&F in repairs wall mixer brass chromium plated quarter turn with provision for over head shower with 115 mm long bend pipe on upper side connecting legs and wall Flanges suitable for fixing with GI pipes 15mm dia complete all as specified and as directed. Make: Jaquar Cat Part No FUS- 29273UPR FUSION SERIES or of equivalent make as per Appx 'A' as approved by GE.
S&F in repair angle cock with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as specified and directed.. Make: Johnson Eco Cat part No: T3910C or of equivalent make as per Appx 'A' as approved by GE.
S&F in repairs Two Way bib taps with wall flange quarter turn suitable for 15mm bore pipe long body fancy type brass CP, screwed down screwed for iron pipe or brass ferrule complete all as specified and directed.. Make Johnson VIVA new series Cat part No: T4808C or of equivalent make as per Appx 'A' as approved by GE.
S&F in repair cast copper alloy CP shower arm square 230mm long with flange complete all as specified and directed by Engr-in-charge. Make : Johnson Cat part No: S0001C1 or of equivalent make as per Appx 'A' as approved by GE.
S&F in repair brass chromium plated shower rose 115mm size square (without arm) with swivel joints including fixing arm/ pipe all as specified. Make Johnson Cat part No: S0006C or of equivalent make as per Appx 'A' as approved by GE.
S&F in repair Toilet paper holder of stainless steel, all as specified and directed. Make: Johnson Fusion series Cat part No: T3254C or equivalent as approved by the GE.
S&F in repair 75mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate complete all as specified.
S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified..
S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified..
S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified..
S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified..
S&F in repairs PVC (SWR) bends of any radius of 110mm bore complete all as specified..
S&F in repairs PVC (SWR) bends of any radius of 75mm bore complete all as specified..
S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 110mm bore pipe complete all as specified..
S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 75mm bore pipe complete all as specified..
S&F PVC (SWR) vent cowl of size 110mm bore.
S&F aluminium anodised powder coated ventilator using rectangular tube of size 63.50 x 25 x 1.50 mm including 3.50 mm thick designer glass louvers and stainless steel wire mesh 0.36 mm nominal dia of wire, average width of aperture 1.40 mm using ‘Jindal” aluminium section with provision for exhaust fan complete all as specified and directed by Engineer-in-Charge.
Supply and fix for aluminium powder coated three track sliding window with two glazed shutters with 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc and provision of opening for AC duct complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make complete all as specified and directed. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.
Taking down chowkats or frames not exc. 1.5 sq. m each with shutters of any description (without taking off shutters from the frames) complete all as specified and directed
Taking down chowkats or frames exc. 1.5 sq.m but n exc 4 sqm each with shutters of any description (without taking off shutters from the frames) complete all as specified and directed
Taking down the shutter of size exc. 1.5 sq. m but n exc 4 sqm each complete and refxing again in same opening after complete all as specified and directed
S&F Factory made 100 % solid wood plastic composite(WPC) door frame, double rebate 125 mm x 65 mm made from wood plastic composite ( Single extruded process) material with density 780 Kg/ Cum, all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.
S&F Factory made 100 % solid wood plastic composite(WPC) door frame, single rebate 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum and complete all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.
S&F factory Made Solid PVC Molded shutter of 28 to 30 mm thick (stiles), consisting of frame made up of MS tube of size 40mm X 20mm (19 gauge) for top, bottom rail, and in stiles rail, with 2, 4, or 6 raised panel design with 5mm thick Moulded Prelam PVC Sheet on the front face & 5mm thick Prelam PVC sheet on back face. Inside core shall be of PVC solid board of 20 mm thick. Door shall be provided with 20 mm thick Pvc lipping all around the edges, fixing in frame at site complete all as specified and directed Note : All screws shall be self tapping and length of Screw not less than 50 mm.
Supply and fix for 35mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters complete all as specified and directed.
M/L 2 coats of synthetic enamel paint over a coat of pink primer on new wooden surface including preparation complete all as specified and directed.
S/F 35 mm thick factory made 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive s/s wire cloth, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) complete all as specified and directed
S &F in repair Stainless steel wire cloth ISI marked, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples all as specified & directed.
S&F Stainless steel butt hinges medium weight 100mm ISI marked all as specified and directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm
S&F in repair, 150mm, Mild steel spring for door, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified.
S&F ISI marked Stainless steel Hasp and staple of 100 mm size including bolt to hinge plate fixed with Self Tapping screws ISI marked all as specifed and directed by Engr-in-Charge
S & F 18 mm thick UV coated exterior grade MDF board duly edge banded with 0.8 mm thick PVC taping, fitting of shutters shall be fixed as approved by GE suitable for cup board etc. including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply
S & F Cupboard/Shelves made of HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour 18 mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply
S & F 1.5mm thick PVC lipping for Cupboard / Shelves with 18/20mm wide complete all as specified & directed.
S & F Continuous (piano) hinges, stainless steel, ISI marked Width of flaps (when open) in 20mm, 0.8mm thickness complete all as specified & directed.
M&L for Dubbing coat with average 10mm thick cement plaster in CM 1:4 incl WPC on old irregular face of walls, where the face is not in plumb all as specified. Note: WPC will be paid separately
M&L for 15mm thick cement plaster in CM 1:4 incl WPC on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement including taking down existing plaster all as specified. Note: WPC will be paid separately
M&L for applying two coats of exterior acrylic emulsion paint over a coat of primer on new surface all as specified.
M&L for rendering or plastering work 5mm thick in CM 1:3 in fascia or edging of Chajjas, ceiling and roof projections etc incl WPC , including taking out pealed off plaster / concrete and making the line in true shape and finishing the surface without using extra cement including applying two coats of exterior acrylic emulsion paint over a coat of primer for facia, chajja, and roof projection etc all as directed by Engr-in-Charge..
M&L for Rendering 10 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, including taking down existing plaster all as specified and directed.
M&L for applying two coats of OBD of any tint over a coat of primer and 1mm wall care putty all as specified and directed.
Supply only Integral Water proofing compound. Ratio of WPC with CM shall be as per Manufacturer instruction.
Complete removal of existing treatment on wall (any number of layers) by scarping with steel scapers or any other means including filling depessions of scrapped surface with putty and preparation of surface for further treatment all as specified and dircted by Engr-in -Charge
M&L for applying two coats of Oil bound distemper white or tinted over a coat of alkali resistant primer complete
M&L for applying plaster of paris putty of 1mm thickness over plastered surface to prepare the surface even and smooth complete.
M&L for complete removal of existing treatment on plastered surfaces of walls chalk whitening on ceiling prepartory to receive distemper and applying two coats of oil bound distemper .
M&L preparation of old painted wooden surfaces plain or moulded surface of any description over 10 cm girth or width, not otherwise described and apply one coat of synthetic varnish incl one under coating
Material and labour for preparation of new untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
S&F in repair Drapery curtain rod of Stainless steel 25mm dia covered with PVC coating complete with SS bracket any colour rings and side caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw compete all as specified.
M & L Water proofing treatment to sunken slab, walls, etc, shall be carried out as specified below and as directed by Engineer-in-Charge. (a) Clean the sunken portion of toilet/Baths/WCs/Kitchen thoroughly remove laitance, dirt, dust etc. (b) Form angle fillet of size 40 mm x 40 mm along the junction of wall and floor using polymer modified mortar (“ Dr fixit” Pidicrete URP” or eqvt).(c) Sanitary pipes entering through walls and floor shall be sealed with “Dr Fixit Bathseal Tape” and the gaps to be grouted with non-shrink cementitous grout “Dr Fixit Bathseal Grout” or eqvt. Nahani traps etc to be fitted securely and the gaps around it to be grounted in the same manner. (d) Apply one coat of a Bitumen-modified polymer coating “Dr Fixit Bathseal Plus” or eqvt on all angle fillets by brush and cover it with 100mm open woven mesh when it is still wet. Apply second coat of the same coating on the angle fillets and allow it to dry completely. (e) In the remaining area, in dry substrate condition brush apply first coat of the same coating and further apply second coat when first is dry. Extend the coating upto 150mm above the FFI. Above FFI, another cementitious waterproofing waterproof coating “Dr Fixit Pidifin 2 K” or eqvt can be further applied right upto 2.1 m to waterproof the shower area also, if it is a bathroom or bath cubicles of a sanitary annex and pply second coat after 6-8 hoours and allow to dry completely. (f) After 2 to 3 days, sunken portion must be overlaid with a 50 mm thick concrete screed 1:3:6 type B0 mixed with integral WPC (Liquid) laid to slope 1:60 towards outer face of wall. Provide 40 mm OD UPVC pipe at the lowest point with 300 mm projection beyond the outer face of the wall. Then fill up the sunken portion with lean concrete 1:5:10 type E2. (g) After completing plumbing work in the toilet/WC/Bath/Kitchen floor, tiling work (floor and dado) can be carried out using suitable Tile Adhesives and ready to make tile grouts of appd makes such as Dr Fixit, FOSROC SIKA, MC BUCHEMIE, ROFF, etc.
M&L for providing cement concrete 1:5:10, typ E2, (using 20mm graded stone aggregate) in mass concrete, sub base, filling sunken floor and similar items complete all as specified and directed.
Complete removal of existing water proofing treatment of any thickness and cement mortar screed in existing roof including scrapping out old treatment/ bitumen etc. The roof surface shall be thoroughly wire brushed, cleaned to eliminate all sharp projections, washed, dried up and cleaned of all foreign material and dust to receive new water proofing treatment and removal of rubbish off the premises to a distance exc. 500m and not exc 1.5 Km complete all as directed.
Material and labour for PCC (1:2:4) type B-0 (using 12.5mm graded broken stone aggregate) averaging 50mm thick as in leveling course on roof slab including finishing the surface of concrete even and fair to receive screed complete all as specified and as directed.
Material and labour for water proofing treatment to RCC roof slab complete all as specified below and as directed by Engineer-in-Charge including testing :-(a) 10mm thick rendering in cement mortar (1:3) mixed with and including integral water proofing compound @ 3% by weight of cement on roof slab finished even and fair complete (b) On the dried plastered surface, one coat of approved bituminous primer @ 0.25 Kg/Sqm shall be applied. (c) On this primered surface, APP modified bituminous memberance 3mm thick with non woven polyster mat as reinforcement weighing not less than 3.50 Kg/Sqm with plain finish shall be laid by torch application method (d) Apply a coat of bituminous aluminium paint @ 0.15 Kg/Sqm. (e) The overlap while torching shall be at least 100mm at the longitudinal edges and 150mm at the ends. (f) The treatment shall be carried as per manufacturer instructions through authorised applicator.
Dismantling water tanks exc. 500 litres of capacity and not exc.1000 litres capacity and removing to store complete all as directed.
Dismantling water tanks exc. 250 litres of capacity and not exc.500 litres capacity and removing to store complete all as directed.
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale, dirt etc from tanks, mouths of circulating pipes for capacity of tank exc.500 litres and n.exc. 1000 litres complete all as directed
All as per serial item No.94.00 here-in-before but for tank capacity exc.250 litres and n.exc. 500 litres
Supply and fix, rotational moulded polythelene water storage tanks 3 layer white colour water tank non toxic effect,algea formation protection (made from virgin grade of polyethylene material which is duly stablized with anti-oxident plastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top),the internal and external surfaces of tanks are smooth,clean and free from any hidden internal defects, hoisted and fixed in postion including S & F necessary GI fittings,inlet/outlet washout,overflow pieces long nipples,checknuts & washer,20mm dia PTMT valves high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball etc complete all as specified and as directed.
All as per serial item No.96.00 here-in-before but for tank capacity exc.250 litres and n.exc. 500 litres
S & F 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
Supply and fix for rolled mild steel frame work as in grills, doors or gates of angle or other sectioin with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fittings also fastenings and fixing etc. conforming Fe 410-W(Gde-E-250) quality -B complete all as specified and as directed.
M/L 2 coats of synthetic enamel paint over a coat primer on newly steel surface including preparation complete all as specified and directed.
M&L for Cement concrete 1:3:6 type C-2 (using 40mm graded agg) as in plinth protection, 75 mm thick and finished even and smooth without using extra cement and joints to be made per 2Sqm and filled with bitumen, including demolition of existing cement concrete all as specified and directed
Removing of vegetation / plantation on the wall/ roof/ any position of up to double storey building including necessary scaffolding upto 6 m height and roots superfacial area n.exc 2 sqm each and making good of surface by applying chemical treatment with GLYPHOSATE 41% including removing /refixing of CI/GI pipe lines complete.(Note : Brick work, plaster and CI/GI pipe lines shall be measured and paid separately)
M & L for preparation of external surfaces of walls and appying crack filler in the cracks and then two coats of chemical water proofing treatment on wall and chajja terrace and parapet walls, grooves etc. such as , CEMISTIK PU 50 heavy Duty watererproofing coating or equivalent complete all as per manufacturer instruction as directed by Engineer-in-Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
S&F in repairs Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed
Demolition of brick work /stone boulder built in cement mortar .
M & L for old size fly ash brck in CM 1:6 . straight or curved on plan exc 6M mean radius , built in CM 1:6 complete all as specified and as directed.
Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing the debris away from the defence premises complete all as specified and as directed
Excavating over areas n.exc. 1.5 m deep in any type of soil and getting out in soft/loose soil.
M&L for broken stone hard core of gauge n.exc 63mm deposited, spread and leveled in layers not exc 15cm thick, watered and rolled, rammed to a true surface all as directed.
M&L for 100mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregates) as in sub base.
Material and labour for glossy machine pressed precast cement concrete coloured interlocking tiles, paver block, any shape and size as approved, made by table vibratory method using PU mould 60mm thick factory made, conforming to IS 15658-2006, M-35 grade laid over with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand incl dismantling old blocks all as specified and as directed. NOTE : (i) Manufacturers test certificate for crushing strength and Water absorption shall be submitted alongwith sample.
M & L Textured heavy duty exterior floor tiles of size 300mmx300mm x10mm thick ,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a screed bed of 20mm thick in CM (1:6) including demolition of existing tiles complete, all as specified. Make:- Johnson Endura textured design or equivalent of Kajaria/Somany/Orient).
M&L for rendering 15mm thick on fair faces of brick/concrete surfaces in CM (1:4) finished with sponge finish at any height
M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over one coat of primer.
Excavation in trenches n. exc 1.5 m wide & n.exc 1.5 m in depth and getting out in soft / loose soil.
Returning, filling in including spreading, leveling, watering and well ramming in layers not exc. 25cm in soils.
Removing excavated material not exc. 250mtrs and depositing where directed at a level not exc. 1.50mtrs above the starting point.
M&L PCC (1:4:8) type D2 using 40mm graded aggregate in foundation.
Excavation in post holes (or similar holes) each n.exc 0.5 cum, getting out in soft/loose soil, returning, filling in & ramming earth or broken rubbles mixed with earth around in layers n.exc 25 cm complete all as specified and directed.
M&L for cement concrete type C1 (1:3:6) using 20mm graded aggregates as in post holes complete all as specified and directed.
Material and labour for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC (1:2:4) type B-1, smooth finished and reforming benching as required for 150 mm internal dia of pipe complete all as specified and as directed.
M&L for rendering 15mm thick on fair faces of brick/concrete surfaces in CM (1:6) finished with sagol finish.
M&L PCC (1:4:8) type D2 using 40mm graded aggregate 75mm thick as in sub base.
M&L non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 and demolition of existing tiles complete all as specified.
Supply and fix mild steel compound girders and stanchions, lattice girders aerial masts, staging for water tank and the like including caps bases, splices etc built up from two or more beam or channel sections or angle with plates, including all lattice bars, stiffeners, gusset plate grade Fe-410-W(Gde-E-250) quality- A complete all as specified and directed
Material and labour for mild steel Fe 410-W(Gde-E-250) quality-B in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified and as directed.
Supply and fix for rolled mild steel Fe-410-W (Gde-250) quality B, as in main and cross beams, hip and jack rafters, purlins where connected to common rafters fixed with angle cleats or other connecting plates complete all as specified and as directed.
S&F GI tubing 25mm dia medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors.
M&L for 150mm bore dia RCC pipe class NP2 laid and jointed in cement mortar with collars and tested complete.
Drilling and tapping cast iron water mains (in position) for branch connections of the internal dia
M&L for PCC 1:4:8 type D2 as in concrete bed to drain pipes of 150mm bore including packing under and haunching against the sides of pipe after they are laid complete.
M&L position suspended false ceiling system using T-grid suspended ceiling grid system. The size of grid shall be 600x600mm, with GI frame work main runner 38 x 24 x 3600mm, cross 'T' 25 x 24 x 60mm/25 x 24 x 1200mm and wall angle 24 x 24 x 2540mm (thickness of the material of 0.30mm ), using 8-9mm thick ceiling panel laminated with PVC film on front face and foil back available in due drop texture as per IS-2095, part-I-1996, fixed in the grid of T-grid suspended ceiling grid system duly suspended by 4mm dia GI bar hanger from the purlins of the roof with butterfly clips all as specifed and directed by Engineer- in -charge. Make:-Gyproc/Armstrong.
S&F 15mm dia, pillar tap with 190mm extension body with fly nuts capstan head screwed down high pressure with or Without lettered hot or cold with long scewed shank complete all as specified. [Make : JAGUAR KUP-35021 PM
S&F Brass Chromium plated towel ring all as specified and directed. Make: Jaquar Cat part No:AQN-7721 or of equivalent make as per Appx 'A' as approved by GE
S&F grating round 75 mm size of CP with/without hole all as specified.
S&F rating round 100mm size of CP with/without hole all as specified.
S&F white counter top Basin (self-rimming) Oval shape of size 550mm x 430mm x 195 mm fixed in position including waste coupling and PVC waste pipe, 32mm dia. complete Make: Parryware Model Aquarius, Cat Part No – C0466(SP) or of equivalent make as per Appx 'A' as approved by GE.
S&F Vitreous China urinals, half stall type complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automaticflushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushingcistern, trap and waste pipe)
S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)
S & F brass Chromium plated soap dish , fixed to wall with CP brass screws, all as specified and directed. Make: Prayag Cat part No: BA-25 or of equivalent make as per Appx 'A' as approved by GE
S&F Toilet paper holder of stainless steel, all as specified and directed. Make: Jaquar Cat part No: AKP-35721P or equivalent as approved by the GE.
S&F Two Way bib taps with wall flange quarter turn suitable for 15mm bore pipe long body fancy type brass CP, screwed down screwed for iron pipe or brass ferrule complete all as specified. Make Jaquar Cat Part No -ORP-10041PM or of equivalent make as per Appx 'A' as approved by GE.
S&F angle stop valve with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as specified. Make: Jaquar Cat Part No FUS- 29053 FUSION SERIES or of equivalent make as per Appx 'A' as approved by GE.
Supply and fix for glass shelf 450mm X 150mm X 8 mm thick with chromium plated railing fixed with and including chromium plated brackets complete all as specified and as directed.
Taking down cement plaster on brick of stone walls of concrete surfaces etc incl racking out joints, hacking for key, scrubbing down with water etc.
Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws with two corrugation side lap complete all as specified and as directed.
S&F for 2nd class HW in Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints, complete all as specified
M&L for 35mm thick glazed and skelton shutters, open or rebated and prepared to receive glass, gauze etc (without sah bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Pt-I, section 8, clause 8.24(a) supplied and fitted to chowkats complete all as specified and directed
S&F for 125mm long aluminum anodised barrel tower bolt extruded section and fixed on doors complete all as directed
S&F for 250mm long aluminum anodised sliding door bolt with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed complete all as directed
S&F for 100mm butt hinges medium weight cold rolled mild steel complete all as directed
S&F for 125mm long aluminum handles cast type, anodised fixed on doors complete all as directed
S&F for 300mm mild steel helical door spring ordinary rat tail rod pattern springs including roller and roller plate fixed on doors complete all as directed
S&F for galvanised mild steel wire cloth 0.56mm nomilal dia of wire and average width of aperature 1.18mm fixed with tinned tacks or galvanised staples fixed on doors complete all as specified and directed
Material and labour PCC (1:3:6) type C2 (using 40 mm graded broken stone aggregate ) as in sub base complete all as specified and as directed.
M&L mild steel TMT bars to 8 mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia. or securing with clips equality conforming to Gd.I,IS-432 (Part -I).as in stirrups, spacers and binders.
M&L for 15mm thick cement plaster in CM 1:4 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement with two coats of exterior acrylic emulsion paint over a coat of primer incuding preparation of new surface all as specified.
M&L for repair of steel gate of any size ,any shape and any position . Taking down steel gate and repair holdfast,uplifiting of steel gate , welding to required member,repair/greasing to roller ,repair and repositioning of base rail, make in true position to revolve , including one coat of synthetic enamal paint complete all as specified and directed by Engr-in charge.
M & L for Providing precast cement concrete, PCC 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate), as in louvres and jallies, 25mm thick (measured solid), including all mouldings, set in CM 1:4 complete all as specified & directed.
M & L for Reinforced cement concrete (nominal mix) 1:2:4, type B-0 (using 12.50mm graded crushed stone aggregates as in coping of walls, canopies, and in the shelves and the like incl form work complete all as specified & directed.
Supply & fix 40 mm bore galvanised Steel Water tubing, ISI marked medium grade with necessary fittings such as bends, elbows, tees, unions, short pieces, caps & plugs etc fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
Material and labour for point wiring using approved colour coding as per IS ,with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty PVC concealed conduit including all accessories after chasing in walls etc with Metal flush box of suitable module, with earth dolly, covered with modular plexy glass gold of Havells cover plate & frame for modular switches, sockets, regulators etc including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor along with wiring and connecting to earth dolly providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed for the following (a) One light / wall / exhaust fan point controlled by one, one way switch 6 Amps complete all as specified and as directed
- Ditto- all as per item No164 above but One ceiling fan point controlled by one, one way switch 6 Amps and regulator
- Ditto- all as per item No164 above but One bell point controlled by one, one way switch 6 Amps complete all as specified and as directed
- Ditto- all as per item No164 above but One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on same board complete all as specified and as directed
- Ditto- all as per item No164 above but One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on independent board complete all as specified and as directed
- Ditto- all as per item No164 above but One two way light point controlled by two nos. two way 6A switches complete all as specified and as directed
Description all as per 1 here-in before but using 2.5 Sqmm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 6 pin socket outlet plug point,16 Amps independent including necessary running of 2.5 Sqmm PVC insulated multistranded copper conductor single core FRLSH cable as earth continuity conductor along with wiring and connecting to earth dolly, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed
Description all as per 164 here-in before but using 4.0 Sqmm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 Volts grade for 6/16 Amps power point including necessary running of 4.0 Sqmm PVC insulated multistranded copper conductor single core FRLSH cable as earth continuity conductor along with wiring and connecting to earth dolly providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed
Material and labour for point wiring using approved colour coding as per IS ,with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty PVC casing caping including all accessories after fixing on surface of walls /ceilings etc with PVC surface boxes of suitable module, earth dolly, covered with modular white cover plate & frame for modular switches , including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor along with wiring and connecting to earth dolly providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed for the following
(a) One light / wall / exhaust fan point controlled by one, one way switch 6 Amps complete all as specified and as directed
(b) One ceiling fan point controlled by one, one way switch 6 Amps and regulator
(d) One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on same board complete all as specified and as directed
(e) One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on independent board complete all as specified and as directed
Supply and fixing Modular Switch - 10AX 1 Way switch one module Make Havells Cat No AHCSXXG101 complete all as specified and as directed.
Supply and fixing Modular Switch -10AX 2 Way switch one module Make Havells Cat No AHCSXXG102 complete all as specified and as directed.
Supply and fixing Modular Bell push - 10A Bell push switch one module Make Havells Cat No AHCSBIG100 complete all as specified and as directed.
Supply and fixing Modular Switch - 16AX 1 Way switch with indicator one module Make Havells Cat No AHCSXIG161 complete all as specified and as directed.
S & F Modular socket outlet multipurpose 6 Amps, 5 pin, 2 module Shuttered type Make Havells Cat No AHLKPWG065, complete all as specified and as directed.
S & F Modular socket outlet multipurpose, 6/16 Amps shuttered type, 2 module Make Havells Cat No AHLKCXG133 complete all as specified and as directed.
Supply and fixing, Ding Dong bell suitable for operation on AC. 230 volts, single pole complete all as specified and as directed.
Supply and fixing modular fan step regulator, 120W - 2 module suitable for ( 48" & 56" fans) supply complete all as specified and as directed. Make Havells Cat No AHLRFHG005
S & F Ceiling rose, 3 phase / PVC / polycarbonate, complete all as specified and as directed
Fixing only for ceiling rose, 3 terminals, PVC/ polycarbonate type, isolated body obtained serviceable from item No. 75 complete all as specified and as directed.
S & F Lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.Make Anchor Cat No 39935
Supply only Highly efficient LED Bulbs, 10 W, White/ warm white used as a ready replacement for existing GLS/ CFL direct fit lamp, in B-22 cap complete all as specified and as directed
Supply and fixing die cast aluminium housing , opal white PC diffuser, With E27 cap, IP 54 rated LED bulk head fitting suitable for 20 Watt LED lamp including lamp “ Make Lucker Model Boxy Eco4 complete all as specified and as directed
Supply and fixing 20/22 Watt Inverter LED Batten with Opal Diffuser, IP20, Battery back-up & Functioning as per Product TDS with intregrated electronic driver, connector block, holder, decorative end caps, LED tube light etc complete with all accessories prewired and mounting PVC rectangular block, including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed. Make Halonix Cat No LED INVERTER BATTEN HLB-08-22-CW-INV or equivalent in Havells, LHEXACP7FNIW020
Supply and fixing 10 Watt , White/ warm white LED High quality aluminium extruded fitting with intregrated electronic driver, connector block, holder, decorative end caps, Philips Cat No 31402, LED Picture light complete with all accessories prewired and necessary mounting PVC rectangular block, including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed. Make Jaquar cat No -LGLZ01X010XW , Orient Cat No- LBLN-10-C-SQ
Supply and fixing LED street light fitting 36 Watt or above 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. Make Jaquar Cat No LPCRSRT 36WXC Note :- (i) GI medium grade pipe bracket of 1.5 Mtr length, size of pipe suitable to mouth of street light fitting along with nuts, botts washers and MS flat iron clamps of size as ordered shall deemed to be included in the unit rate quotated. (ii) Rate quated shall be inclusive of provision of 1.0 Sqmm 3 core copper conductor cable multistranded from ceiling rose to light fitting
Supply and fixing ceiling/ wall surface mounted square panel with aluminium die cast housing Nero Surface (Square) 12 /15 watt fitting including lamp complete all as specified & as directed Make- Jaquar Cat No-LNRO02S012SW , orient cat No-LDSVE-015-C-FC
Supply and fixing decorative wall Lamp Opal Glass fitting 7 Watt with Chrome Finish including Lamp: E-27 7W x 1 complete with all accessories prewired all as specified and directed. Make- Jaquar Cat No KCH-CHR-MB160275541A
Supply and fixing 3 Watt aluminum black and metallic nickel combination bed side light warm white standard fitting complete all as specified and as directed. Make Philips Cat No 48042
Supply and fixing Energy Efficient BLDC Motor, wall mounted fan , Power-32 W consumption on high speed, Input voltage 90-245 V-AC single phase, Speed: 1350 RPM ,50 Hz , 400 mm sweep, 3 blade, and making connections complete all as specified & as directed. Make- Atomberg (EFFICIO +)
Supply and fix exhaust fan, AC single Phase, working on input voltage 140-285 , of size 250m sweep, 1300 RPM, Power 20 W with BLDC Motor, blades, frame and louvers provision of 3 core 1.5 sq. mm copper conductor PVC insulated & PVC sheeted flexible wire from ceiling rose/connector to fan including making connections complete all as specified & as directed . Make- Atomberg (EFFICIO) , Usha crispair, Bajaj, Havells, Polycab, Crompton
Supply and fix exhaust fan, AC single Phase, working on input voltage 140-285 , of size 200m sweep, 1600 RPM, Power 16 W with BLDC Motor, blades, frame and louvers provision of 3 core 1.5 sq. mm copper conductor PVC insulated & PVC sheeted flexible wire from ceiling rose/connector to fan including making connections complete all as specified & as directed . Make- Atomberg (EFFICIO) ,Usha crispair, Bajaj, Havells, Polycab, Crompton
Supply and fixing ceiling fans (5 Star rated) High speed working on single phase input voltage 140-285 , Sweep- 1200 mm, 350 RPM (±10%) , complete with compact BLDC Motor, blades, down rods, incl of remote canopy and all accessories including making connections with provision of flexible wire 23 /0.0076 three core copper conductor black/ white from ceiling rose/connector to fan and by passing regulator complete all as specified & as directed. Make- Havells (Enticer), Orient (Aeroquiet) , Bajaj (Energos),
Disconnecting water and electric connections from existing position of geyser capacity 25/50 Ltr, taking down geysers fixed to walls at any height , cleaning , servicing as directed by Engnr-in- Charge and fixing in existing position complete all as specified and as directed.
Supply and fix electric water heater, storage type shock proof with SS Glass line inner tank (rust proof) and heating element upto 2 KW capacity 25 litre, digitial temperature display, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, shock safe safety plug connected with 3 core cable of suitable size / length, hot and cold water pipe connections not less than 45 Cms as recommended by manufacturer including 04 Nos of hold fastener nuts of required suitable size fixed in brick / stone wall complete all as specified and as directed. Note- Minimum 07 Years warranty on Inner tank and 04 Years on heating element shall be provided by manufacturer from date of purchase. Firm should obtain warranty/ gurantee from the manufacturer & submit the same to the department. Make- Glen WH-7055SQWH25LD, Bajaj Model Calenta , Havells Model- Monza Digi (GHWAMJSWH025)
M & L for PVC connection pipe (copper) chromium plated 8 mm dia both end threaded incl brass coupling bolt cone washer complete , length of pipe is not less than 450 mm suitable for Hot/ cold water system complete as all specified and directed.
S & F Distribution Board sheet metal enclosure double door TPN 4 Way, 415 volts, 50 Hz, suitable for Flush Mounting and surface Mounting & provision for FP MCB / Isolator / RCCB / RCBO as incomer and SP/TP MCB's as outgoing , With 100 A Copper Busbar for each phase, With 2 Neutral bar, 2 Earthbar and Cable ties for cable management, Fully insulated busbar & shrouded Neutral bars IP 43 - #IK 09 with metal door including necessary cement work and electrical connections taking out existing unserviceable DB of any size and capacity along with MCBs complete all as specified and as directed.
Supply and fixing amp rating 415V 10KA 'C' curve miniature circuit breaker (MCB) TPN 40 To 100 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning. (Make- Schenider, ABB, L&T, Legrand )
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning .(Make- Schenider, ABB, L&T, Legrand )
Refixing only old serviceable MCB SP /SPN obtained from Item No 205 here-in-before duly cleaning including necessary electrical connection with proper size of copper wire complete with connection testing and commissioning
Supply and fixing 25 Amps Motor starter Make Havells cat No- AHCSMXB251 complete all as specified and as directed
Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed.
S & F submain wiring with 2 single core (FRLSH) PVC insulated unsheathed multistranded flexible copper conductor cable, of 4.0 Sqmm and one single core 4.0 Sqmm flame retardent low smoke (FRLSH) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through includingon surface PVC conduit and conduit accessories heavy duty ISI marked, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed all as specified and as directed complete all as specified and as directed. Note :- ( Two runs of main copper wire, one run of earth wire cable & PVC conduit shall be measured together as one length).
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
Supply and fixing USB Charger 3000 mA 1 module type complete all as specified and as directed. Make Legrand cat No 677489 or Equivalent in Havells Cat No AHLKGXW002
Supply and fixing TV Coaxial socket and connector 1 module Make Legrand cat No 6774 60 or Equivalent in Havells Cat No AHLKTOG001
S & F PVC rigid non-metallic conduit ISI marked of dia 25 mm dia inclusive of all tees, bends, elbows reducers, junction box etc and fixing accessories such as couplers, lock nuts, saddles, etc for telephone cable , TV cable and public address system including where required all as directed by Engineer-in- Charge duly concealed in wall complete all as specified and as directed
S & F PVC rigid non-metallic conduit ISI marked of dia 20 mm dia inclusive of all tees, bends, elbows reducers, junction box etc and fixing accessories such as couplers, lock nuts, saddles, etc for telephone cable , TV cable and public address system including where required all as directed by Engineer-in- Charge duly concealed in wall complete all as specified and as directed
M&L for straight plain brass ferrule (or connecting screw) screwed both ends and fixed suitable for 20 mm bore GI water tubing for tapping on line existing pipe line complete all as specified and directed
Supply and laying 50mm outer dia, double walled corrugated (DWC) HDPE duct pipe conforming to IS- 14930 Pt-II with antirodent and non flame propogating properties plete with fittings for cable protection complete all as specified and as directed.
Supply, lay, joint, test and commissioning of LT under ground cable 1100 volt grade , XLPE insulated and PVC sheathed heavy duty armoured with aluminium conductor , IS 7098-I Marked, Laid in trenches/ducts/fixed on poles/walls/laid under roads/paths/drains/culverts or encased in GI pipe including cable glands, lugs jointing material etc complete all as specified and directed. cable of the following size. (a) 10 Sq mm 2 Core
M & L in repair for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH Cable with multistranded copper conductor of size 4.0 Sq mm nominal area and drawn through PVC non metallic rigid PVC casing caping and its accessories including one run of PVC insulated 2.5 Sq mm (nominal area) multistranded copper conductor FRLSH Cable as earth wire and connected from DB to DB/ main board complete all as specified and as directed.(Note- Two runs of 4.0 Sqmm main cable, one run of 2.5 Sqmm earth conductor and one run of PVC conduit will be measured as one unit)
S & F in repair for LED 10 watts,1000 lumans,230 Volts with extruded aluminium housing with decorative caps and integrated electonic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangement complete all as specified and as directed. Make- Bajaj Cat Part No BCLSB 10 NW or its equivallent model in JAQUAR,HALONIX, HAVELLS, PHILIPS.
S & F for for wall/ceiling mounted LED batten tube 20 watts light fitting, 230 volts with out put of 2000 lumens with extruded aluminium housing with decorative end caps and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 20 watts complete all as specified and as directed. Make :- JAQUAR Cat part No LGLZ01X020XN or Halonix Cat part No LL20-281-XXX065-ALI/ PHILIPS
S/F LED street light fitting 25 Watt 230V energy efficient & environment friendly type. The fitting should have powder coated, pressure die cast Aluminium housing and heat resistant toughened glass with frame having better optics for uniform distribution complete all as per Make JAQUAR Cat No LSRTO4S025XC or equivalent of make Bajaj, Philips, Havells as approved.
S&F in repair for MCB DB SPN 04 way double door sheet metal enclosure with OEM specified common bus bar and neutral link compete including inserting in wall all as specified. MAKE:- LEGRAND/SCHNEIDER
S & F for 'C' curve MCB single pole & neutral 240Volts 32/40 Amps.
S&F 'C' curve MCB SP 240 volt 6 to 30 Amp
S&F for plastic body exhaust fan , AC single phase,240 V of size 150 mm sweep with louvers including necessary fixing arrangement all as specified and as directed.
Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.
Gauri Associates
ANIL CONSTRUCTION CO.
M/S Eknath agencies
M/s Asrani and sons
BAGESHWARY CONSTRUCTION
Sai Construction
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .