Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.9 LAccepted-AOC NO 102 NORTH STREET KARUKKALACHERRY KARAIKAL | L1 | Accepted-AOC Lowest |
Tender Value
₹13.4 L
EMD Value
₹26,880
Closing Date
11 Mar 2024, 3:30 pmClosed
Executive Engineer
The Executive Engineer, Irrigation and Public Health Division, PWD Karaikal
Annual maintenance of cross masonry structures of Channels in Thirunallar section for the year 2024
2024_PWDC3_15573_1
37-05/IPH/TN/2023-24
Open Tender
Civil Works - Others
Item Rate
90 days
Karaikal
Please refer Tender documents.
2 documents required · 2 mandatory
₹525
₹26,880
12 Jul 2024
4 Mar 2024
11 Mar 2024
4 Mar 2024
11 Mar 2024
4 Mar 2024
Amount
Demolishing brick work manually / bymechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead - in cement mortar
Earthwork in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50m - all kinds of soil
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size)
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns,piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping,bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc. upto floor five level, excluding the cost of centering ,shuttering and finishing - 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)
Centring and shuttering including strutting , propping etc. and removal of form work for - retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.Using steel sheet with M.S. farmes
Centring and shuttering including strutting , propping etc. and removal of form work for - foundations, footings, bases for columns-Using steel sheet with M.S. farmes
Brick work with FPS bricks of class designation 35 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand)
Providing and laying brick block of size0.34 x 0.34 x 0.23 mts . In C.M 1:6 (1 cement : 6 fine sand) using well burnt country bricks of class designation 35 for apron and revetment including levelling the bed, laying to the required levels , slope etc.complete
12mm cement plaster of mix -1:4 ( 1 cement : 4 fine sand)
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)
Applying one coat of water thinnable cement primer of approved brand and manufacturer on wall surface - water thinnable cement primer
Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand) - flush / ruled/ struck or weathered pointing
Finishing walls with water proofing cement paint of required shade - New work (Two or more coats applied @ 3.84 kg / 10 sqm)
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade - One or more coats on old work
fabrication supplying and erection of screw Gearing steel shutters of size up to 1.00m width,made out of 8mm thick Mild steel and 65×65×6mm Mild steel angle for outer frame with each 1no. Of vertical and horizontal stiffeners at equal spacing made out of same section and 8mm Mild steel plate for gusset plate 2Nos. of size of 0.30×0.20M with required bolts and nuts etc., and erection of shutter in position at site with all accessories and conveying and leading the shutter to site. the rate to include dismantling the old from the vent, including the power required conveyance of equipments to site loading of dismantled materials after completion of work,transporting to stores, unloading and stacking. The shutter shall be finished with one coat of anticorrosive black paint over one coat of Red oxide paint. The rate shall include petty civil work and trial operation and all taxes etc., complete.
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .