Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.4 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹13.3 L+₹1.7 L (14.3%)Rejected-Finance 0 MANPUR CHITBARAGAON CHITBARAGAON BALLIA UTTAR PRADESH 221713 | BALLIA | UTTAR PRADESH | 221713 | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹20.1 L+₹8.4 L (72.3%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | Rejected-Technical | - | Rejected-Technical NOT ENLISTED IN REQUISITE CATEGORY C (i) |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
19 Jan 2022, 6:00 pmClosed
GE 881 EWS
GE 881 EWS C/o 56 APO
REPAIR/ REPLACEMENT OF SOLAR WATER HEATER, RO, GEYSER, WIRING INCLUDING ALLIED WORK AT CERTAIN UNIT UNDER THE AOR OF AGE B/R-I AND AGE B/R-II OF GE 881 EWS
2021_MES_496714_1
GE/PNH-58/2021-22
Open Tender
Civil Works
Item Rate
180 days
GE 881 EWS C/o 56 APO
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE 881 EWS
₹40,000
Yes
16 Mar 2022
22 Dec 2021
21 Jan 2022
22 Dec 2021
19 Jan 2022
6 Jan 2022
Amount
M&L for complete servicing and repair of solar water heating system of any capacity, servicing and cleaning of all accessories and re-fixing in the same in position, testing complete all as specified and directed by Engr-in-Charge. Note: Unsv accessories will be measured and paid seperately under respective item No 2.00 to 8.00 of BOQ
Supply only solar water heater collector FPC type screw less Technology suitable for existing solar water heating system, ISI marked complete all as specified and as directed. Make Recold or equivalent as approved by GE.
Supply only solar collector glass suitable for existing solar water heating system complete all as specified and as directed.
Supply only Glycol for solar water heating system complete all as specified and directed.
Supply only solar collector with copper brazing complete all as specified and directed.
Supply only heating element of capacity 3 KW, ISI marked suitable for existing solar water heating system complete all as specified and directed.
Supply only make up tank 5 Ltr capacity for existing solar water heating system complete all as specified and directed.
Supply only gasket and end joints suitable for existing solar water heating system complete all as specified and directed.
M&L for complete servicing and repair of RO of any capacity, servicing and cleaning of all accessories and re-fixing in the same in position, testing complete all as specified and as directed by Engr-in-Charge. Note: Unsv accessories will be measured and paid seperately under respective item No. 10.00 to 16.00 of BOQ
Supply only micron cartridge filter sponge 2" x 10" of 4 miron suitable for existing RO plant complete all as specified and as directed.
Supply only RO Membrane conceal 75 GLD or suitable for existing RO plant complete all as specified and directed.
Supply only pressure booster pump suitable for any type/capacity of RO, 24 volt DC, as per existing make complete all as specified and as directed.
Supply only primary sedimenation filter suitable for any type/capacity of RO, as per existing make complete all as specified and as directed.
Supply only post silver activated carbon cartridge for improvement of water taste, as per existing make complete all as specified and as directed.
Supply only SMPS 24 volt DC adopter suitable for any/capacity of RO water purifier as per existing make, complete all as specified and as directed.
Supply only Solenoid switch (water level controler) suitable for any/capacity of RO water purifier as per existing make complete all as specified and as directed.
M&L for Cleaning storage tank of solar heating system of any capacity /size along with complete glass tubes for inside, outside/solar panel all as directed for smooth and efficiant function of system complete all as specified and as directed. Note :- (a) Any damage including to glass parts / solar tube/solar panel as solar water heating system during the cleaning process will be make good / replaced by contractor, cost of the same deemed to be included in the rate quoted by contractor . (b) All rubber parts or minor hidden parts such as PVC ellbow, joint, plug etc shall be replaced by contractor for effeciant functioning of system and cost of the same deemed to be included in the rate quoted by Contractor.
M&L for Removing old paint from the complete structure related to solar water heating system, by scrubbing with emery paper, applying one coat of red oxide piant and two coat of super enamelled paint of branded company (colour of paint as approved by GE), complete all as specified and as directed.
M&L for Cleaning of HDPE water storage tank from inside and outside for solar water heating system for smooth and efficient functioning of system & removing the scale / dirt from inlet / outlet pipe complete all as specified and as directed Engr in charge.
Replacement of tharmostate switch suitable for solar water heater of size 150 Ltr to 300 Ltr , complete all as specified and as directed. Note:- Make and model of thermostate shall be as per sample available at site to sait the solar water heating system.
M&L for disconnecting elect & water connection to RO water purifier of cap 100 to 500 LPH, taking down, from existing position, dismantling and inspecting all the parts, for its serviceability, cleaning of serviceable parts and refixing including replacement of unserviceable parts, re assembling, remounting, reconnecting with electrical & water connectionn and testing complete all as specified and as directed. Note: (i) The defective parts to be replaced shall be measured and paid separately under relevant item No. 22.00 to 30.00 of BOQ. (ii) Cost of minor items i.e. Screws, nut & bolts etc shall be deemed to be included in the above item.
Supply only Sediment filter set of size upto 10" of RO purifier of existing make complete all as specified and as directed.
Supply only RO membrane conceal type of size upto 8" of existing make complete all as specified and as directed.
Supply only UFmembrane conceal type of size upto 10" of existing make complete all as specified and as directed.
Supply only Spun PP of size upto 10" of existing make complete all as specified and as directed.
Supply only Spun thread of size upto 10" of existing make complete all as specified and as directed.
Supply only Inline Sediment Pushfit upto 8" of existing make complete all as specified and as directed.
Supply only Inline Activated carbon Pushfit upto 8" of existing make complete all as specified and as directed.
Supply only Micro filter upto 10" of existing make complete all as specified and as directed.
Supply only candle filter upto 10" of existing make complete all as specified and as directed.
M&L for disconnecting elect & water connection to geyser of cap 25/50/35 ltr, taking down, from existing position, dismantling and inspecting all the parts, for its serviceability, cleaning of serviceable parts i.e. Heating elemet, base assy, connecting lead, thermostat, electrical contact, electric wiring, indicators, safety valves etc and refixing, replacement of unserviceable parts, re assembling, remounting, reconnecting with electrical & water connectionn and testing complete all as specified and as directed. Notes: (i) The defective parts to be replaced shall be measured and paid separately under relevant item No. 32.00 to 38.00 of BOQ (ii) Cost of minor items i.e. Screws, nut & bolts etc shall be deemed to be included in the above item.
Supply only heating element 2.0 KW, ISI marked with gasket suitable for as existing size, type and make of geyser complete all as specified and as directed.
All as per item No 32 above but of cap 1.5 KW complete all as specified and as directed.
Supply only thermostat ISI marked suitable for existing make of the geyser of cap 50/25 /35 Ltrs complete all as specified and as directed.
Supply only inner tank made out of steel sheet conform to IS suitable for 25 ltrs capacity of geyser of different makes vertical type complete all as specified and as directed.
All as per item No 35 above but for Geysers of capacity 35/50 ltrs complete all as specified and as directed.
Supply only new base assembly with inlet and outlet pipe made out of steel base plate with gasket and proper size of nuts, bolts and washer etc suitable for 25 ltrs capacity of geyser complete all as specified and as directed.
All as per item No 37 above but of size 35/50 ltrs complete all as specified and as directed.
S&F in repair indicator lamp as per existing make and size complete all as specified and as directed.
M&L for cleaning of solar cllector in complete all respact and including testing complete all as specified and as directed.
Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.
M&L for Point wiring with two single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable and one single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable as earth continuity to common earth and connecting to earth dolly running in and including PVC casing & caping (ISI marked) of suitable size with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow, Tee, collars, bends etc. with PVC terminals box & cover for mounting swtches, sockets, fan regulator etc for mounting switches, sockets, fan regulators etc complete all as specified and as directed for the following :-
One light point controlled by one way switch 6 Amp complete all as specified and directed.
One fan/ exhaust fan point controlled by one way switch 6 Amp complete all as specified and directed.
One 3/5 pin socket outlet 6 amp on same board complete all as specified and directed.
One 3/5 pin socket outlet 6 amp independent board complete all as specified and directed.
One bell point controlled by one way switch 6 Amp complete all as specified and directed.
All as per srl item No 115 above but for one 3 pin socket outlet 16/20 Amp independent with two single core 2.5 Sqmm size cable as phase & neutral and one single core 1.5 Sqmm as in continuous earth wire complete all as specified and directed. Make of wiring wire against item No- 115 to 116: Havells/RR Kabel/Finolex
S&F in repair Switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified and directed. Make:-Havells/Anchor/Legrand
S&F in repair bell push flush type 6 Amp single pole one way, (ISI marked), complete all as specified and directed. Make:-Havells/Anchor/Legrand
S&F in repair Switch socket multipurpose combination 2 in 1, 3 pin, 5 Amp flush type universal, complete all as specified and directed. Make:-Havells/Anchor/Legrand
S&F in repair Switch socket multipurpose combination 5 pin, 5 Amp flush type universal, complete all as specified and directed. Make:-Havells/Anchor/Legrand
S&F in repair Switch socket outlet multipurpose combination 2 in 1, 6 pin, 5 and 15 Amp flush type universal, complete all as specified and directed. Make:-Havells/Anchor/Legrand
S&F in repair Ceiling rose, 3 phase PVC/poly carbonate, insulated body, complete all as specified and directed. Make:-Havells/Anchor/Legrand
S&F in repair Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.
S&F in repair Stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. for 1200 / 1400mm sweep, complete all as specified and directed. Make:-Havells/Anchor/Legrand
S&F in repair Call Bell, ding dong type suitable for 230 / 240 volts AC 50 Hz complete all as specified and directed.
M&L for taking out old unsv exhaust fan from site of capacity 380/200 mm sweep and replacement of exhaust fan incl all connecting accessories complete all as specified and directed by engineer-in-charge.
S&F in repair of PVC counduit non matalic rigid ,of size 25 mm dia (external)incl all accessories use for fixing of conduit on wall and ceiling etc,complete all as specified and directed.
S&F in repair to replacement of PVC casing caping of size 25 mm incl all fixing accessories complete all as specified and directed.
S&F in repair to replacement of flexible PVC conduit of approved quality of size 25 mm dia bore with fixing materials complete all as specified and directed by Engineer-in-charge.
S&F in repair Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings with & including LED lamp 10 watts (B-22 holder), complete all as specified. Make of LED lamp:- Havells cat part No LHlDERUEML8x010 or equivalent make as specified in PS.
S&F in repair Tube light fitting box type suitable for LED 20W tube rod made out of ultra bright, glass shell, glare free, wide angle, single side connection retofit LED tube with G13 lamp holders complete with hosing with all accessories pre wired and making connection with copper flexible cable of appropriate size from ceiling rose to light fitting including 20LED tube rod 4 feet long with single side connection complete all as specified and directed. Make:-Havells Cat Part No:-LHLDEFXD5L8R020 for LED tube rod & Cat Part No:-LHFXCEP1TNNW020 for batten fittings or Equivalent cat part of make:-Wipro / Crompton / Bajaj Note :- The LED batten and LED tube rod shall be of same make.
S&F in repair LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 volt,AC decorative type with driver holder and LED lamp including connected up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
S&F in repair LED luminaire 600x600mm 35/36 watt, 220 v AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of sitable size complete all as specified and directed.
S&F in repair LED Driver for 34 W LED ceiling light fittings complete all as specified and directed. Make : HAVELLS / PHILIPS/BAJAJ/CROMPTON GREAVES.
S&F in repair Plug & Socket DB, CRCA Sheet steel, powder coated, with metal plug & socket 3 pin with 20 Amps MCB SP complete all as specified and directed.
S&F in repair Sheet metal enclosure factory made (Double door) for DBs, single pole and neutral, 240 volts, 4 way with 200Amps rated bus bar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed. Make:- Havells cat part No-DHDPSHODPW04 or Equivalent cat part of make specified in PS.
S&F in repair Sheet metal enclosure factory made (Double door) for DBs, single pole and neutral, 240 volts, 8 way with 200Amps rated bus bar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed. Make:- Havells cat part No-DHDPSHODPW08 or Equivalent cat part of make as specified in P.S.
S&F in repair Sheet metal enclosure factory made (Double door) for DBs, single pole and neutral, 240 volts, 12 way with 200Amps rated bus bar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed. Make:-Havells cat part No-DHDPSHODPW12 or Equivalent cat part of make as specified in P.S.
S&F in repair MCB SPN 40-63 amps 415 volts 10 KA 'C' series, complete all as specified and directed. Make:-Havells cat part No- DHMGCSNF040 - DHMGCSNF063 or Equivalent cat part of make as specified in P.S.
S&F in repair MCB single pole 6 to 32 amps 240 volts 10 KA 'C' series complete all as specified and directed. Make:-Havells cat part No-DHMGCSPF006-032 or Equivalent cat part of make as specified in P.S.
S&F 1100 volts grade heavy duty cable PVC insulated solid aluminium conductor served with PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 m apart including 4mm dia GI suspension wire, one twin core cable flat of circular of size 6 Sqmm including taking down existing old service connection, complete all as specified and directed.
S&F 1100 volts grade heavy duty cable PVC insulated solid aluminium conductor served with PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 m apart including 4mm dia GI suspension wire, one twin core cable flat of circular of size 10 Sqmm including taking down existing old service connection, complete all as specified and directed.
S&F in repair Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion, complete all as specified and directed.
S&F Sub main wiring with single core cable 2x 16 sq mm FRLS insulated unsheathed stranded copper conductor cable 1100 Volts grade including surface PVC casing caping medium grade alongwith 1x 16 Sq mm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including taking down old unsv sub main wiring of any type, complete all as specified and directed. Note:-2 wire of 16 sqmm, 1 wire of 16 sqmm and one run of pvc conduit/casing caping shall be measured as one unit.
S&F Sub main wiring with single core cable 2x 4 sq mm FRLS insulated unsheathed stranded copper conductor cable 1100 Volts grade including surface PVC casing caping medium grade alongwith 1x 2.5 Sq mm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including taking down old unsv sub main wiring of any type, complete all as specified and directed. Note:-2 wire of 4 sqmm, 1 wire of 2.5 sqmm and one run of pvc conduit/casing caping shall be measured as one unit.
S&F in repair ceiling mounting LED light fittings 34 watt, pre-wired, suitable for 2x2 grid ceiling all complete all as specified and directed. Make: HAVELL'S (PLUTO NEO) or equivallent in Make as specified in PS.
S&F in repair gate light fittings, outdoor type, high power LED 25 watt, pre-wired, with suitable pole for mounting complete all as specified and directed. Make: Havells (Cat No: Coral Opal IP 65) or equivalent in Make as specified in PS.
S&F in repair LED Lamp, CDL, 10 watt, B22 base complete all as specified and directed.
NATIONAL TRADING COMPANY
BINDRA ENGINEERS AND CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .