REPAIR TO JOINERY, DOOR, WINDOW AND OTHER MISC WORK IN CERTAIN OTM ACCN AND REPAIR TO HARD STANDING PAVER BLOCK, DRAIN AND OTHER MISC WORK IN CERTAIN OTM ACCN UNDER GE(MCTE) MHOW

Amount

Taking down chowkats or frame of any description exc 1.5 Sqm each and n.exc 4Sqm (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.

Taking down Shutters of any description exc 1 sqm but n. exc 2 sq. m each of any description complete all as specified and directed.

Taking down chowkats or frame of any description n.exc. 1.5 Sqm each (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.

Taking down Shutters of any description n. exc 1 sq. m each of any description complete all as specified and directed.

Taking down Shutters of any description exc 2 sq. m each and refixing in the same opening after resecuring or easing and adjusting shutters of any description. complete all as specified and directed.

Taking down shutter exc. 1 Sqm and n.exc 2 Sqm each and refixing in the same opening after resecuring or easing and adjusting shutters of any description. complete all as specified and directed.

S&F Pressed steel door frame for door, size 105 x 60mm x 1.5mm thick with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, MS holdfast (size 25mm x 3 mm of length 30 cm) etc., including Cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 , depth of embedded portion of holdfasts exc. Half brick but not exc. One brick from the face of the jamb into the wall complete all as specified and as directed.

S&F Pressed steel door frame for door, size 165 x 60mm x 1.5mm thick with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, holdfasts (size 25mm x 3 mm of length 30 cm) etc., including Cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1, depth of embedded portion of holdfasts exc. Half brick but not exc. One brick from the face of the jamb into the wall complete all as specified and as directed.complete all as specified and as directed.

M & L for PCC 1:2:4 type B0(12.5 mm graded) aggregate for filling in pressed steel door frame.

S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

S & F 35 mm thick second class hardwood rail and style , Plain, framed, panelled shutters Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

S&F 35 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 35 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Pt-1 section 8 and clause 8.24 (a)

S & F 30 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Pt-1 section 8 and clause 8.24 (a)

M&L for Preparation of new wood or wood based surfaces of any description over 10cm or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specifed and directed.

M&L for Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet rinforced with MS Square tube suppling and fixing in opening as per specification and drawing an Sl page No.178 of SSR Part-II

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip if 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bootom rail on either side & as gap insert for top rail and bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site as per specification & drawing an Sl page No.174 of SSR Part-II

S&F 150 mm size aluminium, anodised barrel tower bolt of extruded section.

S&F 125 mm size aluminium, anodised barrel tower bolt of extruded section.

S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.

S&F120mm size, butt hinges, heady weight, cold rolled mild steel.

S&F100mm size, butt hinges, medium weight, cold rolled mild steel.

S&F 150mm size extruded aluminium alloy handles, fabricated type.

S&F 125mm size extruded aluminium alloy handles, fabricated type.

S & F of Powder coated (minimum 50 micron) aluminum three track sliding shutters consisting two Glazed shutters and one guazed shutters(with wire mesh), each shutter width one half of the length of window with the following specifications and making good the adjacent surfaces. (i) Three way track for sliding shutters of cross section 91.80mm x 31.75mm x 1.50mm thick. (ii) Sliding shutter frame of cross section 40 x 18 x 1.50mm. (iii) Aluminium glazing strip of size 18.2 x 16.66mm. (iv) 4 to 5 mm thick float glass superior quality make Modi float for two shutters. (v) IDPE rubber gasket for fixing glass. (vi) Locking cleat per shutter -01 No. (vii) Two nos sliding rollers per shutter. (viii) Rubber shock absorber 03 No per shutter. (ix) Aluminium wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm for one shutter. (x) Fixing screws for frame with wall – 06 No per window.

S & F Powder coated (minimum 50 micron) Aluminium ventilator, fixed type without sash bar, aluminum section weighing 0.55 Kg/ RM including necessary jointing cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws etc. including 50% of bottom portion is fixed with 4mm pin headed glass and balance 50% of top portion is fixed with 4mm thick pin headed glass louvers and cover with 0.36mm dia stainless steel wire mesh at top portion complete all as specified.

S&F 18mm thick factory made PVC sheet one side pre-laminated sheet cabinet shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lipping for 0.5mm thick PVC sheet lipping at all four edges using bonding tape etc, incl 04 nos of magnet for shutter complete all as specified and directed by Engr-in-Charge manuafacturer specifications.

S&F factory made PVC shelf / partition plane board of required size consisting of panel of 18mm thick required size consisting of panel of 18 mm thick celuka PVC ply and for supporting the hold of shelf / partition and shall be provided 3 edges in size 18mm x 18mm as per required length the front side of the edge visible in the front of the shelf / partition to be edge lipped by 18mm width x 1mm thick PVC sheet of density 600 Kg /Cum manufactured by ISO 9001 - 2015 certified company, using solvent cement etc.

S&F Brass handles 100 mm size cast type, polished bright as approved by Engr in Charge complete all as specified and directed.

S&F Met craft stainless steel pluton Heavy Soft close Hydraulic concealed Hinges for full overlay of door complete all as specified and as directed.

S&F in repair Stainless steel curtain rod/rail 25 mm dia medium weight with premium quality incl SS brackets with decorative caps as approved by Engr-in-Charge complete all as specified & directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame incl punching or drilling out old glazing pins/spring clips and providing and fixing new pins/spring clips.

M&L for 4mm thick sheet glass, ordinary quality and glazing with oil putty and fixed in steel/ alumninium windows with necessary fixing adhesive and wooden window with necessary wooden beading and fillets etc in square n exc 0.5 Sqm in each pane.

M&L for 4mm thick sheet figured glass, pin headed type and glazing with oil putty and fixed in steel/ alumninium windows with necessary fixing adhesive and wooden window with necessary wooden beading and fillets etc in square n exc 0.5 Sqm in each pane.

S&F in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples

M & L in fixed in repairs 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, including wooden beading fixed with screws to timber frame work

S & F in repair 150 mm long Aluminium, anodised, barrel tower bolts of extruded section

S & F in repair 100 mm long Aluminium, anodised, barrel tower bolts of extruded section

S & F in repaire 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.

S & F in repaire 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised.

S&F in repairs Helical door spring 300mm, ordinary rat tail rod patttern springs including roller and roller plate complete

S&F in repairs 150 mm floor door stopper of Aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor

Supply and fix in repair 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.

Preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) upto 4th floor. (Note : Rate shall be included for necessary scaffolding and safety measures where required at site)

Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys, scrubbing down with water etc, complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of concrete/brick surfaces in cement mortar 1:6 as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed.

M&L for preparation of new surfaces of plastered of walls and applying Two coats of distemper oil emulsion incl priming the surface and incl wall care birla white putty all as directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise described complete all as specified and directed

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framed work and similar works complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc, separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 M and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 M as directed by the Engineer in Charge.

M&L for Brick work with sub class B bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 Complete all as Specified and directed.

M&L for Brick work with sub class B bricks, straight or curved on plan to any radius in half brick thick wall built in CM (1:4) Complete all as Specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles.

M&L for vitrified tiles of any colour / shade 10mm thick (square / rectangular) area of each tile not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and inculding 15mm thick bedding layer in cmeent sand mortar 1:6 complete all as specified and directed.

M&L for vitrified tiles of any colour/shade 10mm thick (square / rectangular) area of each tile not exceeding 0.36 sqm, in skirting or on vertical surfaces etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and inculding 10 mm thick bedding layer in cmeent sand mortar 1:4 complete all as specified and directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6

All as per item No.56 above but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6

All as per item No.58 above but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for coloured glazed ceramic tiles (colour as approved laid in pattern as approved by GE) size 300mm x 450mm x 7 mm thick on vertical surfaces such as dados and risers to step etc, set and jointed in neat cement slurry and pointed in coloured cement to match the tiles over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M &L for Cement concrete type B2, 1:4:8 (using 40 mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B1 (Using 12.5 mm graded granite stone aggregate) in path, paving, hardstanding etc, complete all as specified and as directed by Engineer-in-Charge.

M & L for coloured Rubber Moulded Chequred Cement Concrete tiles 400 x 400 x 30mm thick, set jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 15 mm thick screed bed in CM 1:6

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long and joints shall be filled with the mixture of bitumen and sand in (1:3) by weight complete all as specified and directed.

S&F in repair vitreous china sqatting pan (orissa pattern) size 580mmx440mm, white with integral foot rest, any pattern including provision of cement concrete bedding (excluding fulshing cistern and flush pipe) with S or P trap, Fixed in repairs, complete all as specified and directed

S & F in repair Vitreous china, wash down water closet pan (pedestal pattern), white, in colour with and incl plastic water closet seat cover white closed pattern with flat bottom, and cover and MS chromium plated hinging device incl connection to outgoing pipe and flushing pipe, complete all as specified & directed by Engr-in-charge.

S&F in repairs low level Flushing cistern 10 ltr capacity, PVC valveless syphonic action type, white with inlet, ball valve, float valve and handle, flush pipe, incl brackets and flushing pipe fixed in repairs complete all as specified and directed.

S&F in repairs vitreous china, white, wash hand basin, flat back size 550x400mm 'including MS brackets including cutting for and pinning in, including waste pipe complete all as specified and directed.

S&F in repair 15 mm dia bib tap long body cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as directed.

S&F in repair 125 mm size Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specifed and directed.

S&F in repair 15 mm bore brass chromium plated pillar tap, fancy type with or without lettered 'Hot' or 'Cold', with long screwed shanks and fly nut, capstan head, screwed for 15mm bore pipe complete all as directed.

S&F, laying for 15 mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors including taking down the existing old pipes complete all as specifed and directed.

S&F laying for 20 mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed.

Cutting chases in brick wall built in cement mortar for concealed water tubing and making good with cement mortat in 1:4 cutting depth not exc 10 cm as directed.

S & F in repairs Stop/angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions.

S&F in repair 1000 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position including removing the existing water tank all as specified in SSR Part-I, ISI Marked.

S&F in repair 500ltr capacity rotational moulded polythyiene water storages tanks (cylindrical vartical with closed top) hoisted and fixed in position including removing the existing water tankall as specified in SSR Part-I (complete all as specified and as directed) ISI Marked.

S&F in repair bib tap standard of PTMT any color high pressure served for Iron pipe and fixed 15 mm bore (min 90 grams) (Make : PRAYAG or equivalent approved).

M&L for complete removal of existing treament and preparation of wall, washing, scrubbing down and stopping old treatment and painted surface of plastered / decorated surface and applying two coat of Premium Acrylic smooth exterior paint and including priming coat of exterior primer and incl one coat of wall care birla white putty complete all a specified and as directed.(Note : painting will be done by brush / spray / roller of building upto the height G+3 Rate shall be included for necessary scaffolding and safety measures where required at site ) all as per directed by Engr -in-Charge) with 5 years gaurantee & Security Deposit there of.

M&L for preparing old surfaces on walls by brooming down or by steel wire brushing, removing of nails, filling the holes by putty where required and applying one coat of distemper oil Emulsion any colour complete all as specified and as directed. (Note : Rate shall be included for necessary scaffolding and safety measures where required at site)

M&L for 300 x 300 x 10mm thick heavy duty ceramic floor tile laid in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for providing PCC 1:3:6, type C-2 using 40mm graded stone aggregate as in drains/ surface, channels including form work all as specified and as directed by Engineer-in-charge.

M&L 16 to 18mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding/rounding) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M&L for Rendering 10mm thick on fair faces of concrete surface of ceiling, chajja in CM 1:3, surface finished even and surface without using extra cement complete all as specified and as directed.

M&L for Preparation of Newly plastered surface and applying three coats of white wash on Ceiling complete all as specified and as directed.

M&L for Rendering 15 mm thick on fair faces of concrete/brick exterior surfaces in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed.

M&L for preparing of newly plastered surface on exterior wall and applying two coats of cement paint over one coat of priming the surfaces all as specified and directed by Engr-in-Carge.

M&L preparation of new surfaces of walls, surfaces applying two coats of with Premium Acrylic Smooth exterior paint over a coat of primer on Walls over a one coat of wall putty (Asian paint or Equivalent) as per manufactor's instructions complete all as directed by Engr-in-Charge. (Note : painting will be done by brush/ roller/ Airless spray machines of building upto the any height all as per directed by Engr-in-Charge).

Distmantling post or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed gound.

Dismantling fencing of wire /mesh, any type

S&F in repair Galvanised 2 strand, steel Barbed wire 2.24mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed.

Restraining and resecuring steel barbed wires of any description including making good staplesetc

S&F chainlink fancing, MS galvanised of mesh size and dia of wire as directed by Engineer in Charge

Excavation in hard/dense soil as in post holes each n.exc 0.50cum, getting out, returning, filling, in and ramming earth or broken rubble mixed with earth around, in layers n.exc. 25cm, watering and removing surplus soil all as specified.

M&L cement concrete in foundations, filling, bed blocks and mass concrete type B-2 (1:2:4) (40mm graded aggregate) complete all as directed.

Providing reinforced cement concrete type B-1 (1:2:4) ( 20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing average sectional area n. exc. 100 sqcm with or without chamfered angles and flat, splayed, rounded or mitred tops including necessary form work as directed and fixed.

S&F mild steel angle iron posts and struts in fencing post and iron flats for securing chain link fencing including all necessary drilling bolting etc. and similar work all as specified and directed.

S&F mild steel screw bolts machine made with hehagonal or square heads at one end and screwed the other or screwed both ends each screwed and to be fitted with washers and one hexagonal or squere nuts n. exc 5 cm long and diqa of neck 10 mm

S&F mild steel bars 10 mm dia and over cut to length bent to shape and fixed in chain link fencing to keep it straight.

M&L for preparation of new or previously untreated surfaces of steel n. exc 10 cm in width or girth and unconnected with other painting and applying two coats of synthetic enamel paint over a coat of red oxide, complete

M&L for TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending including binding with mild steel wire (annealed) not less than 0.9 mm dia

All as per item No 31 above but 5mm dia and over upto and including 10mm dia bars as in stirrupsc

Dismantling boarding, jallies of any description fixed in any position

Providing precast cement concrete louvres and jallies, 35mm thick type B0 1:2:4 (12.5mm graded aggregate) set in cement mortar (1:4)(mea-sured solid), including all mouldings but excluding frame

Demolition of cement concrete unreinforced in Ground floor & paving n.exc 15cm thickness and removal of debris from site all as specified and directed

S&F rolled sections as in posts, main and cross beam, hip and jack rafters, purlins, where connected to common rafters (beam, tee, angle, channel pipes, tubes, plates and flat sections etc)including distances pieces, cleats etc cutting half brick thick wall and fixing with cement mortar complete all as speified and directed of grade FE-410, (gde-E-250) quality all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed.

Dismantling Plain or Corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern Roof covering .

S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Demolition of stone slabs of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete removal of debris outside MD land.

M&L for PCC 75mm thick 1:4:8 type B2 using 40mm graded stone aggregate as insub base finishing the surface rough to receive tilies.

M&L for pre polished coloured cement concrete chequred tile of approved quality size 300 x 300 x 25mm thick on floors over and including 20 mm thick screed bed CM 1:6 set and jointed in neat cement slurry and pointed with colour to match th tiles complete all as specified and directed.

M&L for machine pressed precast concrete interlocing paver block any shape and size conforming to IS-15658-2006 of 60mm thickness, M-40 grade laid dry in floor/path with and including 40mm thick (Compacted thickness) crushed stone sand cushioning complete all as specified.

M&L for machine pressed precast concrete interlocing paver block any shape and size conforming to IS-15658-2006 of 80mm thickness, M-40 grade laid dry in floor/path with and including 40mm thick (Compacted thickness) crushed stone sand cushioning complete all as specified.

Excavation in trenches, n. exc 1.5 m wide and n. exc 1.5 m in depth; for foundation etc. and getting out in hard/ dense soil.

Returning fillng in, including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and directed.

Removing excavated material exc 50m but n exc250 m away from MoD Land form the starting point.

SATHI ENTERPRISES

BHATIA ASSOCIATES

APconstruction