Construction of Anganwadi Building at Paivalasa village in paivalasa panchayat

Amount

Construction of Anganwadi Building at Paivalasa Village in Paivalasa Panchayat

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete

Filling with M.sand including cost and coveyance of all materials to work site and all labour charges etc., complete as per standard specification.

Cement Concrete 1:4:8 mix using 40mm metal including cost and conveyanceof all materials to work site and all labour charges etc., complete as per standard specification.

Brick work in C.M 1:5 mix using country bricks incuding cost and conveyance and all labour charges etc., complete as per standard specification.(Below Base)

Brick work in C.M 1:5 mix using country bricks incuding cost and conveyance and all labour charges etc., complete as per standard specification.(Above Base)

Refilling with carted Earth including cost and conveyance and all labour charges etc complete as per specifications

RCC 1:1.5:3 mix using 20mm metal including cost and conveyance and all labour charges etc., complete as per standard specification.

Supplying and erecting for sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc., complete as per standard specification.

Supply and fabrication of steel including cost and conveyance and alla labour charges etc., complete as per standard specification.

Paving the Top of roof with Solar reflective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three M.Sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works)

Plastering with cement mortar 1:5, 12mm thick including cost and conveyance and all labour charges etc., complete as per standard specification.

Plastering with cement mortar 1:3, 10mm thick including cost and conveyance and all labour charges etc., complete as per standard specification.

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work.

Paving the floor with best quality Vetrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Paving the Floor with Antiskid tiles of size 305x305x6mm laid in CM 1:3,10mm thick and pointing with white cement 0.40kg per sqm mixed with colouring pigment to suit the colour of the tiles including cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification.

Dadooing walls with Glazed tiles of sizes 305mm X 200mm X 6mm size of approved make and quality and colour, Set in cement mortar 1:2 (one cement, two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed etc., complete as per standard specification

Supplying and fixing Baby Basin including cost and conveyance of materials and all labour charges

Supplying and fixing in position White Glazed European Water Closet of best quality and approved make with 100mm 'P' os 'S'' trap with Double flapped rigit P.V.C. seat cover with C.P. brass hinges with 12.5 litres PVC Low Level Flushing Tank with all internal fittings and labour charges, inclusive of fixing lowlevel flushing tank and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers.

Supply and fixing doors including all charges etc., complete as per standard specification. Door D

Supply and fixing doors including all charges etc., complete as per standard specification. Door D 1

Supply and fixing doors including all charges etc., complete as per standard specification. Door D 2

Supply and fixing windows including all charges etc., complete as per standard specification. Window W

Supply and fixing Ventilater including all charges etc., complete as per standard specification. Ventilater V

Provision for electrification arrangements Light point SD 25

Provision for electrification arrangements Fan point SD 25

Provision for electrification arrangements Fan SOR SD 107

Provision for electrification arrangements Plug point SD 38

Provision for electrification arrangements CFL lamp-BH fitting SD 80

Provision for electrification arrangements DPIC swtich of 500 V SD 154

Provision for electrification arrangements G I Pipe (40mm)

Provision for electrification arrangements Service Wire SD 64

Provision for electrification arrangements Exhaust fan SD 114

Provision for electrification arrangements Bulk head fitting SD 83114

Painting two coat with approved quality of oil bound distemper with colour over one coat of white cement for primier coat for the base including preparing surface and all materials cost labour etc., complete as per standard specification.

Painting two coat with ready mixed plastic emulsion of first quality paint and of approved colour over a priming coat including thorogh scarpping clean removal of dirt etc., complete as per standard specification.

Painting two coats using Ist quality readymix enamel paint of approved colour over new iron work including cost and conveyance and all labour charges etc., complete as per standard specification.

Provision of rain water harvesting structure

Provision for wash basin and sanitary pvc lines

Provision for Stainless steel handle for disabled persons-toilet and Provision for Ramp -Anganwadi and Disabled Toilet

Provision for 500 liters water tank with pipeline & Fittings arrangements

Provision for Bala painting

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

A Venu (BID ID -1299355)