Construction of civil works for 220KV Mansa-Talwandi sabo line bay at 220KV S/S Maur

Earth work in excavation in foundations, trenches etc in all kinds of soil where pick jumper work is not involved & not exceeding2.00 mtr depth i/c dressing of bottom & sides stacking the excavated soil clear from the edge.

Dismantling brick work tile, masonry or tile lining In cement

Dismantling concrete-Cement concrete plain1:2:4 mix

Dismantling wire gauge with frame work including separating frame work and putting wire gauge into rolls.

Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead.

Shuttering for faces of concrete foundations and foundation beam & plinth beam

Centering and shuttering for columns (Square or rectangular or poly gonal in plain)

Centering and shuttering for flat surfaces such as suspended floors, roofs

Cement Concrete 1:6:12 with 40mm gauge stone aggregate.

Cement concrete 1:5:10 with 40mm stone ballast

Cement concrete 1:2:4 mixing by mechanical means using concrete mixer volumetric type

Reinforced cement concrete M-20 machanically batch mixed using batch type mixer as per IS1791 and vibrated by needle vibrator but excluding steel reinforcement, centring and shuttering in foundation and plinth.

Reinforced cement concrete M-20 mechnically batch mixed using batch type concrete mixture as per IS 1791 and vibrated by needle vibrator but execulding steel reinforcement centring and shuttering in super structure.

First class burnt brick work laid in cement sandmortar 1:6 in foundation and plinth

115mm thick brick wall in cement sand mortar 1:4 without reinforcement in foundations and plinth

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth

Conglomerate floor 25mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material

Conglomerate floor 50mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material

12.5 mm thick cement plaster 1:3

12.5 mm thick cement plaster 1:5

20 mm thick cement plaster 1:4

20 mm thick cement plaster 1:5

Applying priming coat with metal primer on new steel or iron work including preparation of surface and Painting two or more coats with aluminum paint to give an even shade excluding priming coat

Painting two or more coats with anticorrosive bitumastic Paint to give an even shade

Steel work fixed independently without connecting plates including cutting hoisting and fixing in position-Flats

Mild steel requirement for RCC work where not including the complete rate of RCC including bending, binding and placing in position complete in all respects.-Above 20mm dia bars

Welding by gas or by electric plant, including carriage to and from workshop etc.

Steel reinforcement for RCC work where not included in the complete rate of RCCincluding bending, binding and placing in position complete:- Up to 20mm dia bars.

Providing and laying of Brick on end edging 6.83cm wide, 11.11cm long and 22.86cm high half brick deep including excavation, refilling and disposal of surplus earth up to 50mtr complete as per Punjab PWD specifications

Boring for hand-pump in clay fitting strainer and pipe-Above 75mm dia bore but not exceeding 100mm-From 0 to 15 m.

Boring for hand-pump in clay fitting strainer and pipe-Above 75mm dia bore but not exceeding 100mm-Exceeding 15 m but upto 30 m..

P & F in position gratings 150mm x 150mm for gully trap

Surface dressing of ground including removing rank vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m in all kinds of soil.

Providing and fixing GI barbed wire in 4 rows complete as per specification

Providing and fixing neting mesh complete in as aspect as per specification

P&F various angle iron posts complete as per drawing

P/F MS angle iron nosing of size 50x50x3 mm complete in all respects forcable trenches as per drawing no. CW/DS- 2887 R-1

Providing and fixing of M.S. Cable racks made out of M.S. flat 75x6 mm or M.S. angle 40x40x6 mm complete in all respects as per drawing no. CW/DS- 2887 R-1

Supplying ,Hoisting & placing of Ferro-cement trench cover, frame of size given bleow made of MS flat 50x3mm with 6mm dia bars at 4-1/2” and 9” c/c welded to flat with lifting hook as per DRG.No. CW/ DS-2537-R-5 and CS/DS -2420 –R-3 complete T-3 type 0.65m x 0.65m

Supplying ,Hoisting & placing of Ferro-cement trench cover, frame of size given bleow made of MS flat 50x3mm with 6mm dia bars at 4-1/2” and 9” c/c welded to flat with lifting hook as per DRG.No. CW/ DS-2537-R-5 and CS/DS -2420 –R-3 complete T-4 type 2'6" x 1'9"

Fixing of templates along with foundation bolts as per Drg.

Recovery of bricks dismantled

Recovery of steel

P&F 3BHP Non Clog Pump

Supplying and spreading of 20 mm size crushed stone in 75 mm thick layer over existing PCC flooring in the yard area

Supply of earth, laying, watering & compaction as per spec. with avg. lead of 5 Km for earthfilling

Flooring of Cement Concrete 1:5:10 with crushed stone 20 mm size mechanically mixed laid in 75 mm thickness in blocks of size 3.0mx3.0m using shuttering complete in all respect including preparation of surface for laying concrete.

Providing & Laying of cement Slurry of cement to sand ratio 1:6 using cement content not less than 150kg per 100 Sqm area complete.

Adjusted/Landing Rates (i/c the effect of extra carriage and difference of quarry rates wherever applicable)

Fine Sand

Cement

Steel

Coarse Sand

Crushed Bajri 12mm/13.2mm

Crushed Bajri 10mm/11.2mm

Stone ballast 40mm

Bricks

Please Enable Macros to View BoQ information