PROVN OF EXHAUST FANS IN ALL TOILETS AND KITCHENS OF OFFRS MD ACCN AND CERTAIN MINOR WORKS AT DINJAN MIL STN UNDER GE DINJAN

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth for pier holes, laying of cables, poles, etc and getting out in soft/loose soil complete all as specified and as directed.

Removal of surplus soil to a distance n exc 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and as directed.

M&L for sand cushioning (dry) in trenches for protection of UG cables (below, above and around the UG cable laid in trenches) of 23cm spread thick ness and consolidated (punned) upto 18cm thickness, complete all as specified and as directed. Note : For the purpose of payment, punned thick-ness of sand cushioning only shall be measured and paid for.

S&F for sub-class B brick, well burnt, laid breadth-wise along the axis of cable laid in trenches over sand cushion laid for UG Cable protection complete all as specified and as directed.

M L for PCC (1:2:4) type B-1 (20 mm graded stone aggregate) as in coping of pole, bed plate etc complete all as specified and as directed.

M&L for PCC type C2 (1:3:6) (using 40mm graded broken stone aggregate) in foundations, filling and mass concrete, sub base of floor, complete all as specified and as directed.

M&L for surface fan Point wiring complete with 1.5 Sqmm (Nominal area), PVC insulated unsheathed, multi stranded copper conductor (FRLSH) single core cable , 1100 volts drawn in and including PVC casing capping 20mm or higher size with all fittings and accessories alongwith PVC insulated cable with stranded FRLSH copper conductor (green in colour) of size 1.5 Sqmm and connected to earth dolly including of 1.2mm thick MS sunk terminal box suitably fixed flushed to wall and 3mm thick plastic laminated sheet top cover fixed with brass screws and cup washers for one fan point/ exhaust fan point controlled by one, one way 5 Amp switch and regulator complete all as specified and as directed.

M&L for sub main wiring with 2 runs of single core PVC insulated, unsheathed multistranded copper conductor cable (FRLSH) of size 4 sqmm and one run of PVC insulated unsheathed multistranded copper conductor of size 4 sqmm as earth lead drawn in and including PVC conduit with all accessories such as screws, clips, plugs, clamps etc. as specified for securing cables, battens, conduits etc. to walls, steel joists etc complete all as specified and as directed. Note : Two run of 4 sqmm cable and one run of 4 sqmm cable with PVC casing caping etc shall be measured as one unit.

M&L for sub main wiring with 2 runs of single core PVC insulated, unsheathed multistranded copper conductor of size 2.5 sqmm and one run of PVC insulated unsheathed multistranded copper conductor of size 2.5 sqmm as earth lead drawn in and including all accessories such as screws, clips, plugs, clamps etc. as specified for securing cables, battens, conduits etc. to walls, steel joists etc complete all as specified and as directed. Note : Two run of 2.5 sqmm cable and one run of 2.5 sqmm cable with PVC casing caping etc shall be measured as one unit.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to 4mm GI wire by means of bolts, nuts, check nuts and washers of GI or steel, GI strip protected by 40mm bore light grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20mm bore light grade galvanised iron, wire mesh, charcoal or coke common salt laid in alternative layer of 15cm (complete thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1, 50mm thick pre-cast RCC (1:2:4) type B-1 normal mix cover slabof size 350x350x50mm reinforced with 8 mm dia, TMT bar 10cm c/c both ways and single handle of 10mm dia round bar including necessary excavation, earth work etc. in soft / loose soil and disposal pf soil to a distance n. exc. 50m and necessary testing on completion including taking down all as shown in electrical plate No.3 MES Schedule Part-I complete all as specified and as directed.

Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated, armoured, 2 core, nominal cross sectional area of main conductor 10 Sqmm, stranded aluminium conductor, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, under floors, through GI Pipe complete all as specified and as directed. Note : (1) Pipes shall be measured and paid separately under relevant items of this schedule. (2) Excvation and earth work shall be measured and paid seperately.

S&F for three core of single run copper cable PVC insulated, pvc sheathed flexible stranded copper cable FRLSH suitable for outdoor use 1.5 sqmm PVC single core PVC Sheathed from light fitting terminal to ceiling rose/ overhead conductor etc complete all as specified and as directed.

S&F in repairs modular junction box made of SMC/FRP of size 240x130x110mm mm with provn and incl of MCB SPN 16A, and connector terminal 4 pole indicating RYB phase colour and neutral colour with suitable hinged door preferably top openable complete fixed to street light pole/wall with suitable size of mild steel clamps, nuts and bolts as directed . Make : Cat no GSJB 3525 of Syntax /Hensel.

M&L for steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-22 (8.5 metres long) including two coats of aluminium paint over a coat of primer except the planting depth which shall be painted with black bituminous paint including writing pole number using suitable paint complete all as specified and as directed. Note : Excavation and Earth work, PCC filling shall be measured and paid separately.

S&F for street light bracket fabricated out of GI Tubing light grade 40 mm bore bend to the shape as directed and of length 1.5 mtr complete with mounting MS clamp of flat iron size 40X5mm of suitable length 02 pairs incl nut bolts etc of suitable size complete all as specified and as directed.

S&F for LED street lights nominal power 45 watts, LEDs wattage of min 1 watt and max of 3 watt each, operational volt 170 volts to 270 v, frequency of 50 Hz, lumen efficacy of min 100 lumens per watts, built in integrated electronic LED driver (SMPS based constant current supply) output open/ short circuit protection, phase to phase protection, over voltage protection, surge voltage protection not less than 5 KV with external SPD, protection grade IP 66, CRI greated than 70 %, CW available CCT of 5700 K, powerfactor of min 0.95, pressure die-cast aluminium alloy housing with polyster powder coated, life span of minimum 50000 working hours including fixing at any height and including wiring using three core single run PVC insulated , pvc sheathed flexible copper conductor FR-LSH cables suitable for outdoor use 1.5 sqmm as per IS 694:2010 complete all as specified and as directed. Make : Havells/Crompton/Century/BAJAJ/Phillips.

M&L for framed or brakets made of angles or tee etc with web and flanged, cut to shape drilled and counter sunk for screw including bending and welding angles as necessary gusket plate, reverting etc complete all as specified and as directed.

S&F for switch socket combination 2in 1, 5 pin 6/16 Amp, flush type, independent incl PVC rectangular box etc complete all as specified and directed

M&L for switch piano flush type single pole, one way, 5 Amps, 240 V complete all as specified and as directed.

Supply, installing, testing and commissioning of light duty metal anti dust exhaust fan, suitable for Single Phase AC supply, earthing etc, power input 50 W, 220/240 V, 300 mm sweep size, fan speed 1350 RPM, 3 nos. blades, copper winding, Air delivery minimum 1160 CMM and including all fixing accessories complete all as specified and as directed. Make : Cropmpton/Bajaj/Khaitan/havells/Orient.

Supply, installing, testing and commissioning of light duty metal anti dust exhaust fan, suitable for Single Phase AC supply, earthing etc, power input 31 W, 220/240 V, 225 to 230 mm sweep size, fan speed 1380 RPM, 3 nos. blades, copper winding, Air delivery minimum 800 CMM and including all fixing accessories complete all as specified and as directed. Make : Cropmpton/Bajaj/Khaitan/havells/Orient.

S&F for ceiling rose, 3 way PVC insulated body complete all as specified and as directed.

M&L for making hole for insertion of exhaust fan 300 mm sweep & cutting chases of wall, making good disturbed wall surfaces including finishing with cement mortar (1:4) matching with existing colour/paint of surface area complete all as specified and as directed.

S&F for exhaust fan louvers made out of sheet metal of size 225 to 230 mm sweep good quality with fixing screw complete all as specified and as directed.

S&F for exhaust fan louvers made out of sheet metal of size 300 mm sweep good quality with fixing screw complete all as specified and as directed.

S&F for room window type air conditioner electric driven (single phase) cooling capacity 4500 K Cal per hour 1.5 Ton capacity BEE 5 star rated complete all as specified and as directed.

S&F for sheet metal enclosure with socket plug top two pin and earth plug and double pole MCB for above AC rating complete all as specified and directed. Make : L&T /Legrand/Hager/Seimens/ABB/ Schnieder/GE.

S&F for voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 250 V with output voltage stabilized at 230 Volt with accuracy of + or - 2.5% and of capacity upto 5 KVA complete all as specified and directed. Make : M/s Vintek Electronics; Brand (VOLINA) /Andre Yule/ AE / Brentford/ IECO.

S&F for voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 150V to 280 V with output voltage stabilized at 230 Volt with accuracy of + or - 2.5% and of capacity upto 3 KVA complete all as specified and directed. Make : M/s Vintek Electronics; Brand (VOLINA) /Andre Yule/ AE / Brentford/ IECO.

Supply, installing, commissioning, testing of Deep Freezer, 300/320 ltrs capacity, 230 volt, 50 Hz, aesthetic design, D-cool technology based, energy efficient & Eco-friendly refrigerant with R600a, having metal's hard top single door, with anti bacteria gasket & rotary compressor incl stucco Aluminium inner liner for improved hygiene, spring loaded hibges, with freezer temparature range <-18ºC complete all as specified and as directed Make : Godrej/Blue Star/Samsung/LG/Voltas.

Supply, installation, commissioning & testing of BEE star rated direct cool Refrigerator, single door type, toughened glass shelves & base stand drawer, electric driven (single phase, 230V, 50 Hz, AC supply) of capacity 185 Ltrs or next avilable size in market with non CFC refrigerant inverter based compressor complete all as specified and as directed. Make : Godrej/ Voltas/ Whirlpool/LG/Blue Star.

M/s HALDER ENTERPRISE

R D Enterprises

FREEZCON

NChetia and Sons Trading

STANDARD ELECTRIC WINDERS

M/s PRABIR ENTERPRISE

MAA COMMUNICATION

M/S S. P. ENTERPRISE