Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.4 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹25.3 L+₹85,367.60 (3.50%)Rejected-AOC | L2 | Rejected-AOC Rejected | |
| 3 | L3₹26.4 L+₹2.0 L (8.32%)Rejected-AOC | L3 | Rejected-AOC Rejected | |
| 4 | L4₹26.7 L+₹2.3 L (9.32%)Rejected-AOC 120 144 III PHASE APNA VIHAR JAMMU J K | JAMMU | JAMMU | JAMMU AND KASHMIR | 180010 | L4 | Rejected-AOC Rejected | |
| 5 | L5₹28.5 L+₹4.1 L (16.9%)Rejected-AOC | L5 | Rejected-AOC Rejected |
Tender Value
₹33.3 L
EMD Value
₹66,540
Closing Date
5 Jul 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PROJECT NAGROTA
GE PROJECT NAGROTA c/o 56 APO
PROVISION OF MT SHED FOR 20 X VEH INCLUDING HARD STANDING OF VEH AT MT II ALONG WITH RWH AT NAGROTA UNDER GE P NAGROTA
2025_MES_714264_1
GE(P)/NGT-01/2025-26
Open Tender
Civil Works
Item Rate
180 days
GE PROJECT NAGROTA
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE PROJECT NAGROTA
₹66,540
Yes
5 Aug 2025
14 Jun 2025
14 Jul 2025
14 Jun 2025
5 Jul 2025
28 Jun 2025
Amount
BR PORTION M&L for surface excavation n exc 30 cm and average 15 cm deep and getting out in any type of soil complete all as specified and directed by Engr-in-charge.
M&L for excavation in trenches in any type of soil n exc 1.5m wide and n exc 1.5m deep and getting out complete all as specified and directed by Engr-in-charge.
M&L for excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in deep in soft/disintegrated rocks getting out and levelling of bottom surface to required level for laying of electric cable complete all as specified and directed by Engr-in-Charge.
M&L for removing excavated material to a distance exc 250m and n exc 500 m and depositing ramming in layers complete all as specified and directed by Engr-in-charge.
M&L for returning filling in including spreading, leveling watering and well ramming in layers not exceding 25 cm thick complete all as specified and directed by Engr-in-charge.
M&L for excavating in post holes (or similar holes) each n exc 0.5 cum including dismantling plain cement concreteof any grade including surplus n exc 50m all as specified and directed by Engr-in-charge.
M&L for plain cement concrete1:4:8 type D-2 (using 40mm graded aggregate) in foundation, filling and mass concrete complete all as specified and directed by Engr-in-charge.
M&L for hardcore with broken stone boulders of gauge n.exc 63mm, deposited, spread and levelled in layers n. Exc 15mm thick, watered and rammed to a true surface complete all as specified and directed by Engr-in-charge.
M&L for plain cement concrete (1:4:8)Type D2 using 40mm aggregates 100 thick as in sub base complete all as specified and directed by Engr-in-charge.
M&L for 100 mm plain cement concrete (1:2:4)Type B1 using (20mm graded aggregate) on top surface and finishing surface thick of concrete pavements by brooming finish etc. complete all as specified and directed by Engr-in-charge.
M&L for forming contraction (dummy) joints 65 mm deep x 10mm wide, grade 'A' filled with sealing compound complete all as specified and directed by Engr-in-charge.
M&L for forming contraction (dummy) joints 30 mm deep x 10mm wide, grade 'A' filled with sealing compound complete all as specified and directed by Engr-in-charge.
M&L for plain cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in surface channel & drain incl form work complete all as specified and directed by Engr-in-charge.
M&L for extra for forming fair finished drain or channel 30 cm inner girth of cement concrete using extra cement including forms moulds, mitred/ stopped ends etc complete all as specified and directed by Engr-in-charge.
S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade ST-240.complete all as specified and directed by Engr-in-charge.
S&F rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to grade Fe-410W-(Gde E-250 quality A) complete all as specified and directed by Engr-in-charge.
S&F pre-painted galvalume aluminium zinc coating GI bassed corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-charge.
M&L for preparation of new steel surface of any description, not otherwise described, over 10cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed by Engr-in-charge.
E/M PORTION M&L for Point wiring for One light point controlled by one switch 5 Amp SP one-way complete with 1.5 Sq mm (nominal area) PVC insulated, unsheathed and multi strand copper conductor FRLS cable (ISI marked) drawn into and including PVC surface conduit (med grade) not less than 20 mm nominal dia and conduit fittings including 1.5 Sq mm PVC insulated unsheathed and multi stranded copper conductor FRLS cable as earth wire to common earth and connecting to earth dolly, PVC modular surface box of suitable size for fixing modular switches,sockets,regulators with frame, including modular cover plate (inner/outer) of size as per site requirement and machine made brass screw and washers etc complete all as specified and directed by Engr-in-charge for one light point controlled by one one way switch.
Description all as per item No. 19 above but for one 3 pin 5 amp socket on indipendant board all as directed.
Description all as per item No. 19 above but with 2.5 sqmm copper conductor for 15 amp socket with 2.5 sqmm earth continuity conductor
S & F Modular switch SP one way 5/6 Amps suitable for 1 Module complete all as specified and directed by Engr-in-charge.
S & F Modular socket 3 pin 5/6 Amps suitable for 2 Module complete all as specified and directed by Engr-in-charge.
S & F Modular switch SP one way 16 Amps suitable for 1 Module complete all as specified and directed by Engr-in-charge.
S & F Modular socket 3 pin 15/16 Amps suitable for 2 Modulecomplete all as specified and directed by Engr-in-charge.
S & F ceiling rose surface backalite of suitable size three terminalscomplete all as specified and directed by Engr-in-charge.
Supply and fixing LED lights fitting 1x 18 watt, 220V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-charge.
Supply and fixing LED flood light 120 watt 230 volt outdoor type with thermal management in multiple optics, die-cast aluminium housing ,corrosion resistant, IP 66 protection , including driver and bracket for fixing complete all as specified and directed by Engr-in-charge.
Supply and fixing sheet metal enclosure distribution board SPN 8 way, double door, IP43 protection, powder coated complete all as specified and directed by Engr-in-charge.
Supply and fixing MCB SP 240 Volts 6 Amps to 32 Amps complete all as specified and directed by Engineer-in Charge.
Supply and fixing MCB SPN 240 Volts 32 Amps complete all as specified and directed by Engineer-in Charge.
Supply and laying in trenches or fixing or passing through pipe , XLPE insulated , armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 10 sq mm 2 core complete all as specified and directed by Engr-in-charge.
Supply and fixing DWC pipe for cable protection of outer dia 40 mm and inner dia 32 mm complete with all fitting and complete all as specified and directed by Engr-in-charge.
Supply and fixing GI pipe light grade 40 mm bore for cable protection under floor/on wall with fitting complete all as specified and directed by Engr-in-charge.
M&L for earthing complete with GI earth plate 60cm ×60cm ×3 mm thick electrode buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meter below normal ground level connected to GI earth wire lead 4 mm dia by means of bolts, nuts, check nuts and washer of galvanized iron or steel all as shown in electrical plate No 3 of SSR Part-I connected to continuous earth wire on earthing point all as specified and testing on completion, including provision of GI earth lead wire protected by 15 mm dia GI light grade protection pipe from test point to main board and 20mm GI medium grade watering pipe funnel, PCC earth pit and RCC cover charcoal, salt and GI wire including excavation and earth work etc complete all as directed by Engr-in-charge
MADAN LAL SHARMA AND SONS (BID ID -3341841)
CCC (CHOUDHARY CONSTRUCTION COMPANY) (BID ID -3345993)
bamral builder (BID ID -3348355)
M/S CJ CONSTRUCTIONS (BID ID -3348317)
d d builders (BID ID -3348555)
M/S KALSI ENGINEERS AND CONTRACTORS (BID ID -3348360)
ASHWANI KUMAR KHAJURIA AND SONS (BID ID -3346818)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .