LAIBARERY NIRMAN KARY PALANA BIKAER

earth work in foundation up to 1.5m, ramming bottom dressing sides, back filling and disposal of surplus soil with in a lead of 50m

Cement concrete in foundation and plinth with stone ballast size 40mm including curing and compaction etc in 1:4:8 mix

Brick work in foundation and plinth using bricks of class designation-75in cm 1:6

DPC with RCC 1:1.5:3 mix

Brick work in super structure using brick of class designation-75 in CM 1:6

Providing and fabricating reinforcement for RCC work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) in foundation and super structure up to 4.5m height above plinth level hot rolled deformed (IS: 1139) cold twisted (IS: 1786) bars

Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways with wooden members and removal of from work

P and L CC on Roof

S and F Glazed Tiles on Roof

Providing and fixing 12.5mm thick lapered edge gypsum board conforming to ls 2095-part Ist at all height false ceiling including providing and fixing of frame work made of special section power pressed from M.s Sheet and galvanised in accordiance with zinc coating of grade 350 as per Is 277 and consisbing of angle cleats of size 25mm wide x 1.6mm thick with flangers of 22mm and 37mm at 1200mm center to center one flang fixed to the ceiling with dash fastener 12.5mm dia x40mm long with 8mm dia bolts to the angle hangers of 25x25x0.55 mm off required lenth and other and of angle hanger being fixed with nut and of 1200mm centre to center to which the ceiling section 0.5mm thick bottom wedge of 80mm lapered flanger of 26mm each having clips off 10.5mm at 450mm center to center shall be fixed in a direction prependicular to G.I. Channel with connecting clips made outt of 2.64mm diax230mm long (PWD BSR-2022)

20mm thick plaster on new work including curing and racking of joints in CM 1:6

Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete (PWD BSR 2022)

Applying one coat of cement preime of approved brand and manufacture on wall surface includingg all scaffolding (PWD BSR 2022)

wall painting with plastic emulsion paint of required shade including all scaffolding new work (two or moore coat including base coat of water proofing cement paint) PWD BSR 2022

Supply and fixing Door frame in mortor 1:4 size should be 125x75mm

S and F Flush Door

S and F Saction window

S and F wire mesh on section window

S and F Grill on section window

S and F Eluminium Door

Enamal painting on Door and window

S and F Channel Door

Earth work in filling Ordinary Soil

Carrige of earth lead one km

Cement concrete in floor with stone ballast size 40mm including curing and compaction etc in 1:6:12 mix

S and F Vertified Tiles on Door

Furniture Etc

Computer Scanner Printer invertor etc

water cooler R.O. electric fitting + water fitting etc

yojna Board and Contingency Charges