86171 SPECIAL REPAIRS TO INTERNAL ROADS, ROAD FURNITURE AND ALLIED WORKS AT AFMC UNDER GE (CENTRAL) PUNE

Amount

Repairs to pot holes any depth n.exc 1 Sqm each including sweeping free from dust and mud or water scoring sunken surfaces in roads, paths, etc. cutting round edges to at least 25 mm in depth and making good by filling in screened and graded road metal watering and well ramming (incl supply of metal) and making good by applying tack coat using paving bitumen of grade VG-10 @ 5 kg per 10 Sqm complete all as specified and directed .

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm, exc 50mm and n.exc 100mm deep all as specified and directed.

M&L for premixed bituminous macadam n exc 70 mm thick (consolidated thickness ) using 4.0 % binder content by weight of total mix, layed /rolled compacted to reqired gredient and camber complete all as specified and directed

M&L for preparation of existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc & applying evenly a tack coat with bituminous primer/ tack coat, using paving bitumen of grade VG-10 at the rate of 2.5 Kg/ 10 Sqm complete all as specified and as directed

Material and labour for 30mm thick (consolidated thickness) premixed hot mix Asphaltic semi dense concrete carpet using 5.5% of binder content (VG-30 Grade paving bitumen) by weight of total mix including rolling with 08 to 10 tone power road roller and consolidation to required gradient and camber all as specified and directed. (Note :- Laying shall be done by means of self propelled mechanical paver, finishing with suitable speed and capable of laying, spreading, tamping and finishing)

M&L for painting lines, dashes, arrows, letters etc on roads, pavements etc. 2mm thick reflective marking strips of colour and shade as directed using hot thermoplastic materials, using fully / semi automatic application machine fitted with shoe heater including preparation of the previously treated surfaces, cleaning of all dirt, scales, grease and foreign material etc all as specified and directed.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed.

Supply and fix solar cat eye aluminum alloy shell (100% water proofing design according to IP-65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-Cad rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and directed

Dismantling of stone slab / tiles of any description or thickness laid, bedded and pointed in cement mortar in floors, hard standing, aprons etc complete all as specified and directed.

M & L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block (glossy finish) of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M & L for 25mm thick sand cushioning/sand filling under pavement incl watering, consolidation with clean dry sand complete all as specified and directed.

M&L for precast coloured, chequered cement concrete tiles, of size 300 x 300mm x 25mm thick, conforming to IS-1237 (2006) set jointed and pointed in neat cement slurry in floor laid over and including 20mm thick screed bed in CM (1:6) including necessary filleting in cement concrete 1:2:4 type B0 using 12.5 mm aggregate complete all as specified. (Note : Rate includes for cutting of tiles for curved portion also)

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L for preparation of new surfaces of stone, concrete or plastered surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of PU enamel paint over a primer coat complete all as specified & directed by Engr-in-Charge.

S&F retro reflective sign board of size 60cm x 90cm or 90cm x 60 cm (not exc 6 Sqft), rectangular or pentagonal shape, fixed both sides on board made out of aluminium composite panel (ACP) sheet 3mm thick fixed on SS-304 series hollow tubular section, 38 mm dia of 2 mm thick. A 20 mm square tube of 1.25 mm thick of SS series 304 (not exc 450 mm c/c) to be fixed on both ways to support the ACP boards. The board shall be seated with high intensity retro reflective sheet of blue colour or any colour as approved by GE, computerised designed writting letter/ figures in (Block, Roman, Itlaic style or in Indian languages where required) / index hands (natural size) / arrows/ stops/ commas/ short lines/ dashes/ hypens bracket, holograms etc where necessary shall be made high intensity reflective sheet with in white colour letter, shape and sizes as required and approved by GE. The sign board to be supported on 1 No post of 60 mm dia and 2.5 mm to 3.0 mm thick SS pipes of SS 304 series, exc 3 m and not exc 4 m in height with round moulded design cap on top. Pipes of the boards to be fixed in ground with PCC 1:2:4 type B2 (using 40 mm graded stone aggregate) in post holes of size 45 cm x 45 cm x 75 cm depth (earth work and concrete included in the rates) complete all as specified and directed by GE.

S&F retro reflective sign board of size 120cm x 90cm or 90cm x 120 cm (not exc 12 Sqft), rectangular or pentagonal shape, fixed both sides on board made out of aluminium composite panel (ACP) sheet 3mm thick fixed on SS-304 series hollow tubular section, 38 mm dia of 2 mm thick. A 20 mm square tube of 1.25 mm thick of SS series 304( not exc 600 mm c/c) to be fixed on both ways to support the ACP boards. The board shall be seated with high intensity retro reflective sheet of blue colour or any colour as approved by GE, computerised designed writting letter/ figures in (Block, Roman, Itlaic style or in Indian languages where required) / index hands (natural size) / arrows/ stops/ commas/ short lines/ dashes/ hypens bracket, holograms etc where necessary shall be made high intensity reflective sheet with in white colour letter, shape and sizes as required and approved by GE. The sign board to be supported on 2 nos post of 60 mm dia and 2.5 mm to 3.0 mm thick SS pipes of SS 304 series, exc 3 m and not exc 4 m in height with round moulded design cap on top. Pipes of the boards to be fixed in ground with PCC 1:2:4 type B2 (using 40 mm graded stone aggregate) in post holes of size 45 cm x 45 cm x 75 cm depth (post holes and concrete included in the rates) all as specified and directed by GE.

Aadarsh Construction

MOHANLAL MATHRANI CONS. PVT. LTD.