GE (N) P/TOKEN- 75 OF 2021-2022REPAIRS TO FLOORING, WALL TILES, HARDSTANDING , PLASTERING , JOINERY WORK AND TOILET SANITERY FITTINGS AT AREA RS ROAD , MM ROAD , SFC AND MISC CIVIL WORKS IN THE AREA OF AGE B/R (CENTRAL) UNDER GE (N) PUNE

Amount

Dismantling floor, hearth or wall tiling/paver block/chequered tiles including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.

Material and labour for double charge coloured vitrified tiles 10mm thick (square/rectangular) of colour and pattern as approved by GE, polished, area of each tile exc. 0.18Sqm but not exc. 0.36 Sqm as in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of dark shade tiles, laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

Material and labour for double charge coloured vitrified ceramic tiles 10 mm thick as in vertical surface, of colour and pattern/shade/ wooden texture as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10 mm thick rendering in cement mortar (1:3) complete all as specified and as directed.

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregates) as in sub base ,mass concrete including demolition existing PCC complete all as spd and directed.

M&L for 25mm thick coloured glossy rubber moulded chequered cement concrete tiles of area exc. 0.08 Sqm and n.exc 0.16sqm each, set, jointed and pointed in net cement slurry mixed with grey cement and pigment in floors including 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes complete all as specified and as directed.

M&L for Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including screed bed of 15 mm thick cement mortar 1:4 complete all as specified and directed.

M&L for Glazed coloured ceramic tiles in vertical surface 300mmx200mmx7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including screed bed of 10 mm thick in cement mortar 1:3 complete all as specified and directed.

M&L for coloured glazed ceramic tiles of size 300mm x 450mm x 7 to 8mm thick of colour and pattern as approved by GE, as in vertical surface, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick screed bed in cement mortar 1:3 complete all as specified & directed.

Material & Labour for refixing the good peaces of paver block including requisit screed bed or sand cushion 50 mm thick in the same location or other location or other location after clearing and removing unserviceable material to out side MoD land.

Machine pressed precast coloured glossy rubber moulded concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness,of M-35 Grade including 50 mm thick screed bed orsand cushioning for laying interlocking tiles including demolition & removing unserviceable material to out side MoD land.

M&L for coloured glazed ceramic highlighter tile of size 450mm x 300mm x 7 to 8mm thick, colour and pattern as approved by GE, as in vertical surface set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick screed bed in cement mortar 1:3 etc complete all as specified & as directed.

M&L granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like over and including 15 mm thick screed bed of CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade including dismantling of existing stone slabs/ tiles of any description or thickness laid bedded and pointed in cement mortar and removing rubbish off the premises complete all as specified and as directed.

M&L for Machine cut cudappah stone slab 20 to 25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling of existing stone slabs/ tiles of any description or thickness laid bedded and pointed in cement mortar and removing rubbish off the premises complete all as specified and as directed.

Labour only for full round moulding to 18 to 20mm thick granite slab complete all as directed.

M&L 40mm thick cement concrete 1:2:4 Type B1 (20mm Graded Stone Aggregate) , as in Floors, court yard etc., and finished the Cement Concrete Surfaces Even and Smooth with using Extra Cement, complete including demolition existing concrete all as specified and as directed.

Supply and fix for glass dividing strips 3mm thick and 38mm width, inserted in position conform to design complete all as specified and as directed.

M&L for cement concrete 1:3:6 Type C-2 (using 40mm graded stone aggregate) 75 mm thick in plinth protection, laid in alternate bays not exc. 3.0m in length, finished surfaces even and smooth without using extra cement including demolition existing concrete and rubbish off the premises complete all as specified

M&L Brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 etc including demolition of brickwork built in cement mortar complete all as specified and directed.

Taking down cement plaster on brick/ stone walling including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces with sagol finish all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement etc complete all as specified and as directed.

M&L for preparation of new plastered or unplastered surfaces and applying two coats of cement base paint over a coat of primer as specified and directed.

M&L for preparation of new plastered or unplastered wall surfaces and applying two coats of acrylic distemper over a coat of birla white putty & primer as specified and directed.

Material and labour for removing of plants, bushes, weeds with roots from walls, roof, chajja, canopy, parapets, roof kerbs, around water tanks, stagings, outlets junctions of water pipe lines , waste water pipe, bends and filling the disturbed area with cement concrete (1:1.5:3) or cement mortar (1:3) using water proofing compound as per manufacturer's instruction and making the patch finished as per surroundings complete all as specified and as directed. (Note: Rate quoted is deemed to be included for scaffolding, safety measured required for working on or up to height of 15 metres vertical slopes)

M&L for complete removal of existing treatment on walls using steel wire brush, sanding machine, rubbing ivory papers etc and washing , rubbing down and stopping of distempered and painted surfaces, preparing surfaces to receive new finish complete all as specified and directed.

M&L for complete removal of existing treatment on ceiling using steel wire brush, sanding machine, rubbing ivory papers etc and washing , rubbing down and stopping of distempered and painted surfaces, preparing surfaces to receive new finish complete all as specified and directed.

M&L for applying wall care putty 1 to 1.5 mm thick on walls surfaces etc complete all as specified

M&L for applying wall care putty 1 to 1.5 mm thick on celing surfaces etc complete all as specified

M&L for applying one coat of alkali resistant priming paint on wall etc complete all as specified

M&L for applying one coat of alkali resistant priming paint on celing etc complete all as specified

M&L for two coats of acrylic distemper of approved tint on wall surfaces etc complete all as specified

M&L for two coats of acrylic distemper of approved tint on ceiling surfaces etc complete all as specified

Preparation of old treated plastered surface of wall by filling cracks by crack fill paste of Berger or of equivalent make as approved by GE, removing loose paints etc , removing nails etc and making good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying one coat of acrylic distemper complete all as specified and as directed.

M&L for one subsequent coat of acrcylic distemper complete all as specified and as directed.

Preparation of old treated plastered / ceiling surface of ceiling by filling cracks by crack fill paste of Berger or of equivalent make as approved by GE, removing loose paints etc , removing nails etc and making good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying one coat of acrylic distemper complete all as specified and as directed.

Material and labour for preparation of old surfaces of walls and applying two coat of white wash complete all as specified and as directed.

Material and labour for preparation of old surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.

M&L for preparation of old surfaces of wood and wood based material of any description over 10cm width or girth and applying one coat of synthetic enamel paint.

M&L for preparation of old painted steel surfaces of any description over 10cm girth or width and applying one coat of synthetic enamel paint.

M&L for preparation of old surfaces of wood and wood based material/ asbestos surface of any description in ceiling etc over 10cm width or girth and applying one coat of synthetic enamel paint.

M&L for preparation of old plastered or unplastered surfaces and applying one coat of cement base paint complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces and applying two coats of cement base paint as specified and directed.

Material and labour for preparation of old treated plastered or unplastered/ concrete surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Preparation of old treated plastered surface of wall by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying one coat of plastic emulsion paint complete all as specified and as directed.

Preparation of old surface of wall by filling cracks by crack fill paste of Berger or of equivalent make as approved by GE, removing loose paints etc , removing nails etc and making good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying one coat of luster paint complete all as specified and as directed.

Preparation of old surface of wall by filling cracks by crack fill paste of Berger or of equivalent make as approved by GE, removing loose paints etc , removing nails etc and making good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying two coat of luster paint complete all as specified and as directed.

M&L for preparing the old wooden surfaces of any description including cleaning and applying a coat of wood filler and one or more coats of french polishing till the desired finish is obtained.

Material and labour for scrapping out old treated wooden surfaces in floors, staircase etc ,sanding the surfaces using sanding machine, application of pigment and hardener to desired colour and finally applying one or more coats of melamine polish with spray guns, compressor etc complete till glossy surface is obtained complete all as specified and as directed.

All as per serial item No.48 here-in-before but as in wooden doors, window and wall paneling.

Material and labour for preparation of old decorated surfaces and applying one coat of 100% Acrylic exterior emulsion paint to mangalore tiles/ roof/ parapet wall/floor etc. complete all as specified and as directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with two corrugation side lap including dismantling unserviceable asbestos cement (corrugated/ semi corrugated etc.) sheets any type complete all as specified and as directed.

Material and labour in repair for 6mm thick asbestos cement, corrugated or semi corrugated sheets in roof, fixed with L-type or J-type or cranked hook bolts etc. complete including dismantling of sheet all as specified and as directed.

Material and labour in repair for 6mm thick asbestos cement, two piece adjustable serrated ridge for corrugated or semi corrugated sheets fixed with L-type or J-type or cranked hook bolts etc. complete including dismantling of ridge all as specified and as directed.

Dismantling of structural steel work of any description including doors, gates, framed trusses etc. complete all as specified and as directed.

Supply and fix for mild steel work in tubular trusses, beams, rafters, purlins, main columns, posts etc., for structural work including special shaped washer etc. complete using hollow mild steel sections of square or rectangular tubes conforming to IS: 4923-1997 grade St.-240 fixed with angle cleats or other connecting plates complete all as specified and as directed.

Supply and fix for rolled mild steel section Fe 410-W(Gde-E-250) quality A as in main and cross beams, hip and jack rafters, purlins connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates all as specified and directed.

M&L for mild steel framed work such as grill, grating etc. with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified & as directed.

Supply and fix for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening,conforming to Fe-290 Grade-E-165 complete all as specified and as directed.

Taking down door shutter of any description, area exc.1sqm and not exc. 2 sqm each and refixing in same opening after making necessary repair/ easing complete all as directed. ( Note :- Builders hardware used in repairs shall to measured and paid separately)

S&F in repairs chromium plated two way bib cock quarter turn with wall flange 15mm dia Cat No. FUS 29041 7041 of make Jaquar or other equivalent series of Jaquar or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in repairs chromium plated fittings angular stop cock quarter turn with wall flange 15mm dia Cat No. FUS 29053 of make Jaquar or other equivalent series of Jaquar or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in repairs chromium plated pillar cock quarter turn, Cat No. FUS-29001 of make Jaquar ‘QUEEN'S Series or other equivalent series of Jaquar or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in repairs chromium plated single towel rail 600mm long including built in side brackets ,Cat No. AQN-7711 of make Jaquar or other equivalent series of Jaquar or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in repairs chromium plated toilet paper holder ,Cat No. AKP-35751 P of make Jaquar or other equivalent series of Jaquar or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in repairs chromium plated soap dish ,Cat No. AQN-7731 of make Jaquar ‘QUEEN'S Series or other equivalent series of Jaquar or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in repairs chromium plated towel ring round, Cat No. A C N - 1121 of make Jaquar or other equivalent series of Jaquar or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in repairs chromium plated wall mixer with wall flange with 115mm long bend pipe, connecting legs ,Cat No. FUS-29273UPR of make Jaquar or other equivalent series of Jaquar or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in repairs chromium plated towel rack, 600mm long with lower hangers, Cat No. AQN-7781 of make Jaquar ‘QUEEN'S Series or other equivalent series of Jaquar or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in repair 5 mm thick float glass looking mirror with stainless steel wall brackets complete all as specified and as directed.

Supply and fix in repair brass chromium plated mixer for mixing hot and cold water screwed down high pressure for iron pipe of 15mm bore complete all as specified and as directed. (Make ; Prayag)

S&F in repairs, chromium plated bib cock with wall flange quarter turn complete all as specified and as directed. Cat No. FUS-29037 of make Jaquar ‘Fusion ' series or of equivalent make as per Appx 'A' as approved by GE.

S&F in reapir 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

Removing excavated soil, debrises obtained from demolition from various locations (other than this work) from site to outside MOD land complete all as as directed. The location at out side MOD land for disposal shall be located by the contractor himself).

Taking up or down 15 mm bore steel tubing with all fittings and connections complete all as directed.

Taking up or down 20 mm bore steel tubing with all fittings and connections complete all as directed.

Supply and fix for 15 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Supply and fix for 20 mm bore GI tubing 'medium grade' galvanised, with all fittings laid in trenches complete all as specified and as directed.

Fixing only for 15mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors including cleaning for refixing complete all as specified and as directed.

Fixing only 20mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors including cleaning for refixing complete all as specified and as directed.

Supply and fix for 25mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors including taking up or down existing tubing complete all as specified and as directed.

Supply and fix in repair for 25mm bore dia gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

Supply and fix in repairs for vitreous china wash hand basin, white, size 550 mm x 400 mm flat back excluding taps but including CI brackets, chromium plated brass waste coupling, chain and plug, waste fittings, union and PVC waste pipe 32mm dia, of required length, cutting for and pinning in ends of bracket or errecting stand complete all as specified and as directed.

Supply and fix in repair for brass mortice lock, vertical type, size 100mm of 4 levers with duplicate key complete all as specified and as directed.

Supply and fix in repairs vitreous china EWC of white colour with plastic water closet seat closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, including connection to drain or out going pipe and to PVC flusing pipe, antisyphonage pipe and all necessary fittings etc complete all as specified and as directed.

Supply and fix in repairs for vitreous china, squatting pan of 'Orissa' pattern, size 580 mm x 440 mm, white, with PVC 'P' of 'S' Trap, front or back inlet and integral foot rests any pattern, including provision of lime concrete bedding including connection to trap and to flushing pipe, antisyphonage pipe including 32mm dia PVC flush pipe etc. and making good to the floor complete all as specified and as directed.

Material and labour for 10 to 12.00 mm thick PVC Coated mineral fibre false ceiling board of size 600 mm x 600 mm on and including GI powder coated grid work with using 32mm x 23.5mm x 1.5 mm thick main tee, 23.5 mm x 23.5 mm x 1.28 mm cross tee and 23.5mm x 23.5mm x 1.5mm angle fixed to wall for false ceiling including necessary supporting hanger with 3.0mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways, size of grid shall be 605 mm x 605 mm including dismantling of ceiling board of any description and any thickness including cover fillets/ grid etc. complete all as specified and as directed. Make :- Armstrong / Gyproc Diaken, New Age (ACE). Note: Height of ceiling is above 5 metres.

Supply and fix in repair of for 10 to 12.00 mm thick PVC Coated mineral fibre false ceiling board of size 600 mm x 600 mm in existing grid work of any type including necessary supporting hanger where missing and repair to existing grid work where required including dismantling of ceiling board of any description and any thickness etc. complete all as specified and as directed. Make :- Armstrong / Gyproc Diaken, New Age (ACE). Note: Height of ceiling is above 5 metres.

Supply and fix in repair for fibre glass reinforced translucent corrugated sheeting or polycarbonet sheeting 2.00 mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and as directed.

Supply and fix in repair for brackets for drapery/ curtain rod, decorative type, of stainless steel as per sample kept in GE (N) Pune office complete all as specified and as directed.

Supply and fix in repair for decorative head for drapery/ curtain rod 25 mm dia of stainless steel complete all as specified and as directed.

Supply and fix in repair for drapery/ curtain rod of 25mm dia, decorative type, of stainless steel complete all as specified and as directed.

Material and labour in repair for false ceiling with Single layer of size 1800mm x 1200mm x 12.5mm thick, tapered edge gypsum board (Gypboard) Plain (conforming to IS 2095-Part 1:2011, Certified board) is then screw fixed to ceiling section with 25mm drywall screws {Material-Carbon steel EN-ISO 7049/50, Finish-Case hardened Grey Phosphating} at 230mm centres on ceiling section & 150mm at periphery of ceiling. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Gyproc Pro-Fill Jointing compound (Conforms to ASTM C475), Gyproc Joint Paper tape fixed on and including metal grid of hot dipped galvanized steel sections and suspended as per manufacturer's specifications and instructions complete all as specified and as directed. Make: Gyproc-Saint Gobain or equivalent of Armstrong, Diaken, New Age (ACE) as approved by GE.

M&L for plaster of paris decorative cornices/ moulding to the pattern as approved, cross sectional area exceeding 13 Sqcm and not exceeding 25 Sq cm and fixed in decorative pattern including preparation of surfaces and applying two coats of acrylic distemper over a coat of primer matching with the colour of ceiling complete including dismantling of existing all as specified and as directed.

Taking down shutters of any description opening exc 2 Sqm each and removing from site complete all as specified and as directed.

Taking down chowkat with shutter (without taking off shutters from the frame) area n exc 1.5 Sqm each and removing from site complete all as specified and as directed.

S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, in opening as per specification and shown on drg in SSR Part-II 2004 complete all as specified and as directed.

S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rails, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement, in the frame at site as per specification and shown on drawing in SSR Part-II (2004) complete all as specified and as directed. Make Rajshree / Sintex or equivalent

S&F, 30 to 32mm thick flush shutters, solid core construction with block board core & plywood face panels commercial type on both sides complete all as specified and as directed.

S & F Factory made fully glazed/wire gauge (single piece Both side) PVC prelam door shutter 29 to 30mm thick consisting of frame made up of MS tube of size 19mm X 19mm (19 guage) for top & bottom rail and in styles. Single piece plain coloured PVC sheets of 5mm thick to be used to cover style & rails. For edges, PVC sheets strip of 10mm thick struck inside with solvent cement. Plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert with PVC solid core board 19mm to 20mm thick. Panel shall be of wire gauge stainless steel wire cloth 0.36mm nominal dia of wire and everage width of aperture 1.40mm, stainless steel wire cloth shall be covered with aluminium XPM in rhombus shape in one piece from top to bottom rail, fixed with self tapping screw not less then 50mm long complete all as specified and directed by Engineer-in-Charge. Make: Rajshri/ Sintex/Duraplast/Accucell

S/F Aluminium door handle 125mm size cast type etc complete all as specified

S/F Aluminium anodized barrel tower bolt 200mm size etc complete all as specified

S/F Aluminium anodized barrel tower bolt 150mm size etc complete all as specified

S&F, 100mm size butt hinges medium weight, colled rolled, mild steel and fixed complete all as specified and as directed.

Material and labour for 18mm thick plywood, grade BWR, type BB, number of ply 9 Nos, fixed with fevicol and nails for working table/ storage almirah to the size and pattern including taking down existing plywood complete all as shown on drawing and as directed.

Material and labour for 12mm thick plywood, grade BWR, type BB, number of ply 7 Nos, fixed with fevicol and nails for working table/ storage almirah to the size and pattern including taking down existing plywood complete all as shown on drawing and as directed.

Material and labour for 6mm thick plywood, grade BWR, type BB, number of ply 5 Nos, fixed with fevicol and nails for working table/ storage almirah to the size and pattern including taking down existing plywood complete all as shown on drawing and as directed.

Material and labour for 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer’s instruction complete all as specified and as directed.

Material and labour for 0.90mm thick white laminate type 1 with approved adhesive as per manufacturer’s instruction complete all as specified and as directed.

Material and labour for 2nd class hard wood cover fillets, bull nosed, splayed, chamfered or rounded on one edge or face, wrought, secured with fevicol and nails, sectional area exc. 3 Sq.cm but not exc. 6 Sq.cm complete all as specified and as directed.

Material and labour for 2nd class hard wood cover fillets, bull nosed, splayed, chamfered or rounded on one edge or face, wrought, secured with fevicol and nails, sectional area exc. 6 Sq.cm but not exc. 13 Sq.cm complete all as specified and as directed.

Material and labour for 2nd class hard wood cover fillets, bull nosed, splayed, chamfered or rounded on one edge or face, wrought, secured with fevicol and nails, sectional area exc. 13 Sq.cm but not exc. 25 Sq.cm complete all as specified and as directed.

S&F in repair stainless steel auto close/ hydraulic hinge suitable for shutter of not exc 0.50 sqm area complete all as specified and as directed. Make Prayag Cat No. 5120 or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in repair stainless steel hinge 50 mm long for cupboard shutter fixed with Self Tapping screws complete all as specified and as directed.

S&F in repair 75 mm long stainless steel handles for cupboard shutter fixed with Self Tapping screws complete all as specified and as directed.

S&F in repairs chromium plated sink cock with regular swinging spout (wall mounted model) with wall flange complete all as specified and as directed. Make: Jaquar Cat part No ARI 39347S or equivalent of make as per Appx 'A' as approved by GE

Supply and fix in repairs, chromium plated single lever extended basin mixer (height 85mm) without popup waste system with 450mm long braided hoses as per Cat No.FUS-29023B of make Jaquar ‘FUSION ' series or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

Supply and fix in repair for hand shower, chromium plated (health faucet) of ABC body with 8mm dia 1.2 metres long spirochrome flex tube and wall hook all as per Cat No. ALD-587 of make Jaquar or equivalent as approved by GE complete all as specified and as directed.

Supply and fix in repairs for overhead shower 100 mm dia (body and face plate stainless steel with chrome finish) with shower arm with rubit cleaning system, complete all as specified and as directed. Make: Jaquar Cat No.OHS 1989 or equivalent of makes as per Appx 'A' as approved by GE

Material and labour in repair for 4mm thick one side decorative group match veneer plywood and application of resin pigment and hardener to desired colour and pattern and applying two or more coats of melamine polish with spray guns, compressor etc till the desired glossy surface is obtained complete all as specified and as directed.

Supply and fix for aluminium powder coated louvered ventilator with provision of exhaust fan using ‘Jindal” aluminium section or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc including taking out old ventilators complete all as specified and directed.

Supply and fix for aluminium powder coated three track sliding window with two glazed shutters, with 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc includung taking out old windows complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make as specified. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

Supply and fixing Writing letters or figures (Block Roman, Italic or Indian) n exc. 30 cm high with tetro reflective sheet 1 mm thick over new / existing board all as specified & directed.

S & F Sign board / name plate / number plate with retro reflective sheet 1 mm thickness over & including 5 mm thick aluminium composit sheet fixed to wall with the help of screws all as specified and directed (area of board not exc 1 sqm Each)

Supply and fixing glass mosaic tiles in any shape and size on wall and floors tiles as in fountain or any water retaining cascade structures complete over and including approved chemical /readymix mortar as in backing coat etc complete all as specified and directed as per the manufacturer instructions and manual.

labour only Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete.

M & L for making hole and fixing the metalic packer for hydrophobic PU foam and sealer without distrubing existing stracture as per manufacturer instruction and froming agents like coreseal 357 A / coreseal 357 C for carrying out nondistructive waterproof treatment of sunken portion of slab , floor and walls of bathroom , WC /WHB and floor traps (Combined Unit) by using construction chemicals method such as hydrophobic PU Grouting , epoxy coating etc including cleaning of surface with wire brush , detecting the source of leakge and repairing , removing / taking down unsound treatment / surfaces and followed by material and labour for second course injection of resin like coreseal 135 A /135 B without distrubing existing stracture complete all as per manufacturers instruction and as directed by Engr-inCharge (Make -Buildcore Chemicals / Pidillite/chemistic fosrock as approved.)

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

Sai Construction

M/s Akshay Contruction

R k construction

M/S Eknath agencies

M/s RAJKUMAR MANIKRAO PATIL

L.T Associate

m/s Aura Enterprises

T.H.ASSOCIATES

Vijay Construction and Company