Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹14.5 LAccepted-AOC 50 PANCHVATI COLONY KODARIYA MHOW PIN 453441 | MHOW | MHOW | MP | 453441 | L-1 | Accepted-AOC Accepted | |
| 2 | L-2₹15.0 L+₹52,144.53 (3.61%)Rejected-Finance A SECTOR BHAGWATI BHAVAN VIJAY NAGAR LAL GHATI BHOPAL M P 462030 | BHOPAL | BHOPAL | MADHYA PRADESH | 462030 | L-2 | Rejected-Finance High Rates | |
| 3 | L-3₹15.1 L+₹69,718.33 (4.82%)Rejected-Finance | L-3 | Rejected-Finance High Rates | |
| 4 | L-4₹15.2 L+₹73,836.53 (5.11%)Rejected-Finance | L-4 | Rejected-Finance High Rates | |
| 5 | L-5₹15.3 L+₹85,521.69 (5.92%)Rejected-Finance | L-5 | Rejected-Finance High Rates |
Tender Value
₹17.5 L
EMD Value
₹34,960
Closing Date
5 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (MCTE) Mhow
GE (MCTE) Mhow (MP) 453441
PROVN OF STORE ROOM AT FCTS AND IQT WING, MCTE UNDER GE (MCTE) MHOW
2023_MES_612697_1
GE(MCTE)/MHOW/27(T) OF 2023-24
Open Tender
Civil Works
Works
180 days
GE (MCTE) Mhow
As Per Tender Document
9 documents required · 9 mandatory
₹500
Yes
GE (MCTE) Mhow
₹34,960
Yes
11 Nov 2023
8 Sept 2023
7 Oct 2023
8 Sept 2023
5 Oct 2023
22 Sept 2023
Amount
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in Hard/dense of soil surfaces formed to required slope, gradient, camber and superelevation etc. complete all as specified.
Excavating in trenches, not exceeding 1.5 m wide but not exceeding 1.5 m in depth; for foundations etc. or for shafts, well cess pits, manholes, pier holes,etc. not exceeding 10 sqm on plan but not exceeding 1.5 m in depth and getting out in hard/ dense soil complete all as specified.
Returning, filling in, including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick in soil complete all as specified and directed.
Removing excavated material (soils) etc.not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.
M&L for plain cement concrete 1:4:8 type D2 using 40mm graded crushed stone aggregate as in foundations / mass concrete complete all as specified.
M&L for TMT bar 10mm dia and over as in reinforcement, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia. or higher complete all as specified.
M&L for TMT bar 6mm dia. and over up to and including 10mm dia. stirrups, spacers and binders as in reinforcement, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia. Or securing with clips, complete all as specified.
M&L for Anti-termite Treating bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area, complete all as specified.
M& L for Anti-termite Treating the backfills in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (area of the structure in contact with backfill to be measured)
M&L for Anti-termite Treating the top surface of filled earth at the rate of 5 lires of emulsion per square metre of surface, complete all as specified.
M&L for Anti-termiteTreating the soil under plinth protection at the rate of 5 litres of emulsion per square of surface area, complete all as specified.
M& L for Use and waste of formwork to fair surfaces of sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter surfaces finished fair in forms complete all as specified.
M&L for Use and waste of Formwork to sides of Square, rectangular or polygonal pillars, posts, struts, piers, columns and stanchions surfaces finished fair as per clause 4.11.16.2 (a) of SSR Part-I complete all as specified.
M&L for Use and waste Formwork to flat sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc. surfaces finished fair complete all as specified.
M&L for Use and waste of form work to flat soffits of suspended deck slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) surfaces finished fair as specified in SSR Part-I Clause 4.11.16.2(a) as specified complete all as specified.
M&L For Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs exceeding 10 cm and not exceeding 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work surfaces finished fair in forms complete all as specified.
M&L for RCC (nominal mix) Type B1 ,1:2:4 (20mm graded aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified.
M&L for RCC (nominal mix) Type B1,1:2:4 (20mm graded aggregate) as in Columns, pillars, piers, posts and struts, complete all as specified.
M&L for RCC (nominal mix) Type B1,1:2:4 (20mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified.
M&L for RCC (nominal mix) Type B1 ,1:2:4 (20mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified.
M&L for RCC (nominal mix) Type B1, 1:2:4 (20mm graded aggregate) as in chajjas, complete all as specified.
M&L for Use and wasre of Formwork to chullah hoods, chajjas, troughs and similar items including edges, complete all as specified.
M&L for Brick work with fly ash bricks., straight or curved on plan exc 6m mean radius, built in in CM 1:6, complete all as specified.
M&L for 15mm thick rendering on fair faces of brick work, two coat plaster work consisting 10mm thick Ist coat in cement mortar 1:6 and 2nd coat, 5mm thick in cement and sand mortar 1:4 mixed with water proofing compound, top finished even and fair complete all as specified.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces, in cement and sand mortar 1:6, complete all as specified
M&L for rendering 5mm thick in cement mortar 1:3, on concrete surfaces in ceiling, top surfaces finished even and smooth without using extra cement complete all as specified
M&L for preparation of newly plastered surfaces of ceilings by brooming down and applying three coats of white wash on newly plastered surfaces of ceilings including washing floors, cleaning glass, joinery, electrical fittings, wiring etc, of drops and splashes complete all as specified.
M&L for preparing of new plastered or unplastered surfaces of wall, pillasters, cornices etc. by brooming down or steel wire brushing, scraping down and washing down with water and applying two coats of coloured exterior acrylic water emulsion paint over a coat of wall primer (x2) over a coat of precoat treatment complete all as specified. Note :- Each stage i.e preparation of surfaces, preocat treatment, application of primer, application of 1st coat and application of 2nd coat shall be got passed from Engineer-in-Charge. (ii) Written warranty for four years or as per manufacturers instructions, whichever is more shall be given by the Contractor for efficacy of this item.
M&L for preparation of newly plastered/ unplastered surfaces of walls by applying Wall care white (Putty) thickness not less than 2mm and sand papering surfaces to achieve smooth surfaces and applying distempering with distemper oil emulsion, two coat, white or tinted including washing floors, cleaning glass, joinery, electrical fittings, wiring etc, of drops and splashes complete all as specified.
M&L for broken stone or boulder hardcore (granite/ basalt/ trap) of gauge n exc. 63mm, deposited, spread and levelled in layer n exc. 15 cm thick, watered and rammed to a true surface complete all as specified.
M&L for Plain cement concrete type C1 (1:3:6), using 20mm graded crushed stone aggregate, 75mm thick, as in plinth protection finished even and smooth with out using extra cement complete all as specified.
M&L for 100mm thick, plain cement concrete 1:4:8 type D2 using 40mm graded crushed stone aggregate as in sub base complete all as specified.
M&L for 60mm thick, M-35 grade PCC interlocking glossy tiles (rubber moulded and chemical coated) of size and shape as approved, laid over and including dry sand cushion 50mm thick (watered and compacted/ consoliated), interstices filled in floors/ pathway and filling outer edges with PCC 1:2:4 type B0 upto full thickness of tiles complete all as specified. (Rate quoted shall deem to be included for Sand cushion filling outer edges with PCC). Make : Mehtab or equivalent ISI marked as approved by GE.
M&L for lain cement concrete Type B1, 1:2:4,using 20mm graded stone aggregate, 40mm thick as in floor top finished even and smooth without using extra cement complete all as specified.
M&L for 10mm thick rendering in CM 1:3 on fair faces of brick or concrete surfaces finished even and smooth on roof of slab mixed with water proofing compound, complete all as specified. (Rate quoted shall deemed to be included for water proofing compound)
Supply & providing water proofing roof treatment with polymeric standard water proofing membrane, Aquaflex manufactured by M/s Bengal Bitumen, MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/ Hyperplas manufactured by IWL Ltd having 10 years gurantee for water tightness complete all as specified and described as under:- (a) Preparation of RCC roof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/sqm including cleaning surface all as per manufaturer's specification complete all as specified and directed. (b) Supply & providing water proofing with 3mm thick APP polymeric proofing membran of 3Kg/Sqm HYPERPLAS STANDARD/ MULTIPLAS STANDARD consisting of 100 micron HMHDPE film centre core including coating the surface with compatible primer and torch application of membrane with 10cm overlaps as required thereof, complete all as specified and directed (c) Aluminium bituminous paint @1.10 Kg/Sqm shall be applied over the APP membrane surface. Note : The work of water proofing treatment shall be got executed through expert team of manufacturers or authorised applicator of manufacturer, duly tested for leakproof.
M&L for moorum/ red bajri filling in floors or pavings/ trenches laid in layers not excd 15 cm thick spread, levelled and rammed including watering complete all as specified.
M&L vitrified ceramic tiles of size 600mm x 600mm x 9-10mm or area of each tile not exceeding 0.36 sqm each of approved dark shade, laid in floors etc. set and jointed in neat cement slurry and pointed in white cement and pigment to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified.( Screed bed shall be deemed included in the unit rate quoted by contractor)
All as per item No 38 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.
S&F Powder coated (minimum thickness of powder coating 50 micron) Aluminium frame for doors, windows, ventilators and fixed glazing with one or more rebates including jointing cleat, snap beading and rubber gasket etc. for fixing etc. complete all as specified.
S&F Powder coated (minimum thickness of powder coating 50 micron) aluminium door shutters, side hung type with out sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinges type B-21 100mm long (2 No.) suitable handle (1 No.) complete all as specified.
M&L for 12mm thick Prelaminated particle board, exterior grade, type II, prelaminated, both side with decorative choice lamination, fixed with screws to timber frame work complete all as specified.
S&F 5.5mm thick (nominal) Sheet glass, ordinary quality, in squares, exceeding 0.50 sqm each pane fixed with oil putty complete all as specified.
S&F Powder coated (minimum thickness of powder coating 50 micron) Aluminium alloy sections sliding windows shutters with frames (consisting 2nos glazed shutters and 01 No gauge shutter) Series -D (25mm), 3 track sliding shutters duly fitted with neoprene beading, glazing clips,locking device, heat absorbing glass 4.8mm nominal thickness, and stainless steel wire cloth of 0.25mm dia of wire and 1.15mm width of aperture, aluminium alloy handles etc. complete all as specified.
S&F Pre-painted galvalume aluminium zinc coating GI based profile steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa, hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) as in roof covering/ cladding to wall, including flashings, ridges, valley etc fixed with self tapping screws as specified.
M&L Rolled mild steel in rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe-290( Gde-E-165) complete all as specified.
S&F Rolled mild steel in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with out any attachment, of Fe-410-W (Gde-E-250) quality A complete all as specified.
M&L for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamelled paint over one coat of red oxide Zinc chrome primer complete all as specified.
M & L for Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre incl Hangers 6mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified
M & L 6mm thick Fibre Cement Designer Ceiling Tile, (High Pressure steam cured), pre-painted, self -embossed, reinforced Everest designer cement boards (Ivory Colour) of Oceanic/ Lake & Hill/ Electra/ Cascade texture, conforming to IS 14862: 2000 Category 3 Type B, having Density 1200kg/m3, minimum module of Rapture greater than 10 Mpa and Compressive strenght 38.23 Mpa, complete all as specified
M&L for 25mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.
M&L For mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified.
INTERNAL ELECTRIFICATION
M & L for Point wiring in repairs including with PVC insulated FR PVC unsheathed electric cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area for phase/neutral in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall & 1.5 sqmm green FR PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs including galvanised boxes of suitable module/ size with bakelite sheet for mounting modular switches, sockets, fan regulators etc for the following :-
(a) One light/ fan/ bell point controlled by one switch, complete all as specified and as directed.
(b) One 5amps socket out let point controlled by one switch on same board with other switches, complete all as specified.
(c) One 5amps socket out let point on independent board controlled by one switch, complete all as specified
All as per item No 54 here in before but using pvc insulated unsheathed 2.5 sqmm cross sectional area cable for phase/ neutral & for earth 2.5 Sqmm green PVC insulated cable for 15 Amps socket point on independent board controlled by one switch. complete all as specified.
S & F for Modular Switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified.
S & F for Modular Switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified.
S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified.
S & F for Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified.
S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.
S & F for Lamp holder, PVC/ Polycarbonate type with cord grip cap suitable for pendant fittings, complete all as specified.
S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified.
Supply and fixing LED luminaire 600mm x 600mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified.
Supply and fixing 20W LED 6500K lights fitting Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories all as specified and directed. Make : Havells LHEXACP7UN1W020 or equivalent approved by GE, complete all as specified.
Supply and fix in repairs double door SPN DBs 8 ways of powder coated DB's suitable for MCB's fitted with bus bar, Neutral link, Earth bar and Din ral complete. Indo-Asian Cat Part No 811806 or equivalent approved by GE complete all as specified.
Supply and fix MCB SPN 6 to 32 Amps 10 KA, 'C' series including connection with suitable size aluminium/ copper lugs complete all as specified.
Supply and fix MCB SP 6 to 32 Amps 10 KA, 'B' series including connection with suitable size aluminium/ copper lugs complete all as specified.
M&L for Sub main wiring in repairs with two runs of single core FR PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in and including concealed/ surface non metallic rigid PVC conduit of not less than 25mm dia including one run of PVC insulated unsheathed 4 sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly in concealed/ surface wiring system by cutting of wall and making good disturbed surface of wall all as specified and directed. Note :- Two runs of 4.00 sqmm cable, one run of 4.00 sqmm cable and one run of PVC conduit will be measured, complete all as specified.
S&F replacement of exhaust fan, steel body AC single phase 230 volt of size 300mm sweep complete with blade, frame and louvers all as specified and directed incl making/ alteration of hole wherever necessary making good disturbed surface, painting to match with existing surfaces.complete all as specified.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified.
S & F for ceiling fan, 230 Volts, 50Hz, 1200mm sweep with down road, canopy, blades, BLDC motor etc and service value of the fan shall be greater than 6.1 as per BIS with necessary accessories and electrical connections from ceiling rose to fan teriminal including writting the MES Number with synthetic enamel paint complete all as specified and as directed.
Sppply & Laying XLPE insulated, armoured, electric cable of size 10 sqmm 2 core with aluminium conductor, 1100 volts grade, laid in trenches, fixed on poles/ walls or passing through pipes including provision of necessary lugs and glands & making necessary connection including taking down old unservicable cable of any core complete all as specified and directed.
Excavating in trenches, in any type of soil not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc and getting out in any type of soil complete all as specified.
Supply laying and jointing GI pipe 'light grade' 40mm bore in trenches/ under floors or roads/ along poles/ on wall incl clamps for protection of cables incl fittings complete all as specified and directed.
M&L for clean and dry sand (un washed) in trenches incl spreading and levelling for cushioning of UG cable complete all specified and directed. Note : Thickness after punning shall be measured.
M & L for brick size sub class ‘B’ (modular size), laid flat in trenches for protection of cable complete all as specified and directed.
Jyoti enterprises
M/S UnitedConstruction
Chitragupta Construction
ram prashad chotelal batham
M/S Ashish Construction
SATHI ENTERPRISES
sunway associates
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .