REPAIR POLISHING/CANNING/ PAINTING OF WOODEN AND STEEL FURNITURE ARTICLES AT VARIOUS STATIONS UNDER GE 861 EWS

Amount

Repair to Almirah large steel with shelves FD-1031 Removing unserviceable locks from Almirah large steel and supply and fixing new locks to suit/replace lock of Make : Harrison/Godrej

Removing unserviceable handles and supply and fixing with suitable nut, new chromium plated steel handle

Fixing loose shelves of Almirah with suitable nuts and bolts

Removing unserviceable legs of Almirah and supply and fixing new legs as per drg.

Repair to Almirah med steel with shelves FD-1032 Removing unserviceable locks from Almirah medium steel , supply and fixing new locks to suit/replace lock of Make : Harrison/Godrej

Removing unserviceable handles and supply and fixing with suitable nut, new chromium plated steel handle

Fixing loose shelves of Almirah with suitable nuts and bolts

Removing unserviceable legs of Almirah and supply and fixing new legs as per drg

Repair to Chair Wooden Bottom with out Arms FD-285 Supply and fixing of following parts of Ist class sheesham wood including taking out of old unserviceable parts all as directed by Engineer-in-Charge Front legs

Rear legs

Rails

Stiffeners

Back rest

Seat : Seat shall be of ply wood commercial 5 No Ply 6 mm thick, ISI marked.

Repair to Chair Writing FD-280 Supply and fixing of following parts of Ist class sheesham wood including taking out of old unserviceable parts all as directed by Engineer-in-Charge. Front leg

Rear leg

Rails

Stiffener

Back Rest

Repair to Chair Easy FD-229 Supply and fixing of following parts of Ist class sheesham wood including taking out of old unserviceable parts all as directed by Engineer-in-Charge. Front leg

Rear leg

Rails

Stiffener

Repair to Chair Dining FD-228&279 Supply and fixing of following parts of Ist class sheesham wood including taking out of old unserviceable parts all as directed by Engineer-in-Charge. Front leg

Rear leg

Rails

Stiffener

Back rest

Repair to Chair steel tubular with out Arms FD-75 (M) Removing of unserviceable seat and back of chair steel tubular without Arms, Supply and fixing on new seat and back with suitable screws. Seat for chair

Back for chair

Repair to Chair steel tubular with Arms FD-75 (M) Removing of unserviceable seat and back and arms of chair steel tubular with arms, supply and fixing new seats, backs and arms with suitable screws. Seat for chair

Back for chair

Arms for chair

Rubber shoes for chair with screw

Repair to Form with out back FD-77 Removing unserviceable seat planks of form with out back, Supply and fixing seat plank of Ist class sheesham wood duly seasoned with suitable nuts and bolts as per drawing duly polished. Seat plank of Ist class hardwood including polishing.

S & F of 25 mm MS Square tube not less than 1 mm thickness

Repair to Form with back FD-78 Removing unserviceable seat planks of form with back and Supply and fixing seat plank of Ist class sheesham wood duly seasoned with suitable nuts and bolts as per drawing duly polished. Seat plank of Ist class hardwood including polishing.

Back rest plank of Ist class hard wood including polishing

S & F of 25 mm MS Square tube not less than 1 mm thicness

Repair to Table 3'x2' with out drawer FD-223 Removing unserviceable parts of Table 3'x2', supply and fixing of the following parts to table all as shown on drg and as directed .Legs

Side rails

Front & back rails

Top of Table 3' x 2' shall be made out of 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the shutter all as shown in drawing and as directed by Engineer-in-Charge.

Repair to Table Office Officer steel (FD-84 (M),FD-306 and FD 1003 Removing unserviceable parts of Table office officer steel and supply and fixing of the following parts to table all as shown on drg and as directed. Top of Table table office Officer Steel shall be made out of 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the sutter all as shown in drawing and as directed by Engineer-in-Charge.

M&L in repair/replacement of drawer table office officer in right side, 1mm thick mild steel sheet as per existing pattern having locking device all as shown in drawing and as directed by Engineer-in-Charge.

M&L in replacement legs of table office officer,25mm mild steel square tube 1.6mm thick welded with electric welding machine to match with bottom frame all as shown in drawing and as directed by Enigneer-in-Charge.

M&L in replacement bottom stiffener of table office officer, steel 25mm mild steel square pipe 1.6mm thick welded with electric welding to match with bottom frame all as shown in drawing and as directed by Enigneer-in-Charge.

Removing of unserviceable locks of drawer fixing new locks with duplicate keys Make : Godraj/Harrison

Repair to Table office clerk steel FD-84 (M) Removing unserviceable parts of Table office clerk steel and supply and fixing of the following parts to table all as shown on drg and as directed. Top of Table table office Clerk Steel shall be made out of 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the shutter all as shown in drawing and as directed by Engineer-in-Charge.

M&L in repair/replacement of drawer table office clerk steel in right side, 1mm thick mild steel sheet as per existing pattern having locking device all as shown in drawing and as directed by Enigneer-in-Charge.

Removing of unserviceable locks of drawer fixing new locks with duplicate keys Make : Godraj/Harrison

Repair to Table Peg FD-227 Removing unserviceable parts of table peg as follows, supply and fixing new parts as per drg. Top of Table Peg shall be made out of 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the shutter all as shown in drawing and as directed by Engineer-in-Charge.

Stiffeners

Repair to Teapoy wooden FD-278 Removing unserviceable parts of Teapoy wooden as follows, supply and fixing new parts as per drg. Top of teapoy wooden shall be made out of 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the shutter all as shown in drawing and as directed by Engineer-in-Charge.

Legs (Legs shall be made out of Ist class sheesham wood duly seasoned as per drg)

Stiffeners

Repair to Table office clerk wooden DB-4120 Removing unserviceable parts of table office clerk wooden and Supply and fixing new parts as per drg and as directed Legs (Legs shall be made out of Ist class sheesham wood duly seasoned.

Top of table office clerck wooden shall be made out of 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the shutter all as shown in drawing and as directed by Engineer-in-Charge.

Repair to Bed hard with Ply wood top/Bed Newar FD-246&247 Removing of existing broken/burn out parts of bed ply wood top, Supply and fixing new parts of bed ply wood top as per drg and as directed. Long rails (Ist class hard wood/sheesham)

Short rails (Ist class hard wood/sheesham)

Legs (Ist class hard wood/sheesham)

Head rest as specified in drg

Foot rest

12 mm plywood Top 6'x3'

L clamp of MS 4 mm x 150mm x 40mm

Repair to Locker Bed Side with mirror FD-222 Removing unserviceable parts of locker bed side and supply and fixing new parts of locker bed side as per drg and all as directed. Shutters (Shutters shall be made out of 18 mm thick particle board exterior grade ISI marked).

Top (Top of locker shall be with particle board 18 mm thick exterior grade ISI marked)

Hinges piano type shall be of steel 3/4" 24 gauge

Back of lockers shall be of plywood commercial 5 ply 6 mm thick BWR, ISI marked

Handle 100 mm shall be of extruded aluminum fabricated type.

Hasp and stape (Aluminum anodised 75 mm size)

Repair to Table 3'x3' Steel and Wooden FD-291 Removing unserviceable parts of table 3'x3' (900x900mm) and supply and fixing the following parts of table all shown on drg and as directed by the Engineer-in-Charge. Legs

Side rails

S&F 25mm square tube thickness not less than 1mm in table 3x3 steel

Top of Table 3' x 3' shall be made out of 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the shutter all as shown in drawing and as directed by Engineer-in-Charge.

Repair to Table Writing FD-249&276 Removing unserviceable parts of table writing and supply and fixing the following parts of table writing all shown on drg and directed. Legs

Side rails

Stiffeners

Top of Table writing shall be made out of 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the shutter all as shown in drawing and as directed by Engineer-in-Charge.

Table Dining for 6 pers FD-273 Removing unserviceable parts of table dining 6 pers and supply and fixing the following parts of table writing all shown on drg and directed. Legs

Side rails

Top of Table dining for 6 pers shall be made out of 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the shutter all as shown in drawing and as directed by Engineer-in-Charge.

Table Dining 8 pers FD-273 Removing unserviceable parts of table dining 8 pers and supply and fixing the following parts of table writing all shown on drg and directed. Legs

Side rails

Top of Table dining for 8 pers shall be made out of 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the shutter all as shown in drawing and as directed by Engineer-in-Charge.

Repair to charpoy double bunk steel with ply top Removing of existing brocken/damaged part of Charpoy double bunk steel ply top, supply & fixing new parts of bed plywood top as per drg and as directed. Plywood top 12mm 6'x3'

Repair to Locker Bed Side Steel FD-1029 Removing of old unserviceable handles from Bed side locker steel and supply and fixing new chromium plated steel handle 100mm long as specified and directed.

Removing of old unserviceable safety type hasp and staple from bed side locker steel, Supply and fixing new chromium plated hasp and staple (75x60x3mm) as specified and directed.

Fixing loose shelves of locker bed side steel

Taking out old unseviceable doors of locker bed side steel and S and F of new door size as per drawing and thickness must be 1 mm thick

Removing unserviceable legs of Locker bed side steel and supply and fixing of new legs as per drg, thickness of sheet shall be minimum 1 mm thick

Repair to Charpoy GI Pipe with Nylon Newar FD-220 Removing unserviceable long rails from charpoy GI Pipe and supply and fixing new GI long rail as per IS-1239 medium grade 32 mm bore duly threaded as shown in drg.

GI long rail obtained vide item 95 shall be converted into short rail and fixing duly threaded as shown on drawing in replace on unserviceable short rails.

GI short rails obtained vide item No 96 above shall be converted into leg and fix in place of unserviceable legs duly threaded in charpoy GI

Removing unserviceable GI elbow from charpoy GI and supply and fixing new GI elbow three way ISI mark (medium grade) 32 mm

Removing unserviceable GI check nut and supply and fixing of new GI check nut 32 mm dia (medium grade)

Repair to Charpoy GI Pipe with ply wood top FD-220 Removing unserviceable long rails from charpoy GI Pipe with ply top and supply and fixing new GI long rail as per IS-1239 med grade 32 mm bore duly threaded as shown in drg.

M&L Removing unsv ply wood and replacing with new 12mm plywood top of size 1980x900 mm gde BWR type ISI marked fixed with 13 MS bolt 6mm dia including washer and nuts as directed by Engr-in-Charge

GI long rail obtained vide item 100 shall be converted into short rail and fixing duly threaded as shown on drawing in replace on unserviceable short rails.

GI short rails obtained vide item No 102 above shall be converted into leg and fix in place of unserviceable legs duly threaded in charpoy GI

Removing unserviceable GI elbow from charpoy GI and supply and fixing new GI elbow three way ISI mark (med grade) 32 mm

Removing unserviceable GI check nut, supply and fixing of new GI check nut 32 mm dia (medium grade)

Repair to Charpoy with Hard Top M&L Removing unsv ply wood and replacing with new 12mm plywood top of size 1980x900 mm gde BWR type ISI marked fixed with MS screws 6mm dia including washer and nuts as directed by Engr-in-Charge

TABLE DRESSING LADIES WITH MIRROR:- FD-32,251 M&L in replacement blind mirror of table dressing ladies with mirror, copper electroplated, 5.5 mm thick of size1120x365 mm all as shown in drawing and as directed by Engineer-in-Charge.

M&L in replacement ply back of mirror 6 mm thick both side commercial faces ,ISI mark cut into shape as requires all as shown in drawing and as diected by Engineer-in-Charge.

M&L in replacement Aluminium anodised drawer knob for table dressing ladies all as shown in drawing and as directed by Engineer-in-Charge.

M&L in replacement broken glass shutter of table dressing ladies 5.5 mm thick cut into rquired size all as shown in drawing and as directed by Engineer-in-Charge.

M&L in replacement aluminium channel for shutter of table dessing all as shown in drawing and as directed by Engineer-in-Charge.

M&L in replacement Ist class hard wood (teak), broken legs of table dressing ladies W/M, duly finished to match with existing made out in shape all as shown in drawing and as directed by Engineer-in-Charge.

M&L in replacement black / white colour PVC / rubber shoes for table dressing all as shown in drawing and as directed by Engineer-in-Charge.

TABLE DRESSING GENTS WITH MIRROR:- FD-31,230 M&L in replacement blind mirror of table dressing gents with Mirror,copper electroplated, 5.5 mm thick cut into shape, size 760x380 mm all as shown in drawing and as directed by Engineer-in-Charge.

M&L in replacement ply back of mirror of table dressing gents 6 mm thick both side commercial face fixed in frame all as directed by Engineer-in-Charge.

M&L in replacement top of table dressing gents 18 / 19 mm thick prelaminted particle board one side teak faced and others side white in colour bonded with phenol formaldehyde all as shown in drawing and as directed by Engineer-in-Charge.

M&L in replacement Ist class hard wood (teak) side plank of drawer of table dressing gents fixed with screw/ nail as shown in drawing and directed by Engineer-in-Charge.

M&L in replacement bottom ply of drawer 6 mm thick both side commercial, ISI mark all as shown in drawing and as directed by Engineer-in-Charge.

M&L in replacement aluminium anodised powder coated knob of table dressing gents fixed with screw all as shown in drawing and as directed by Engineer-in-Charge.

Repair to Table Dining OR FD-165 Removing old unserviceable top of table dining OR and supply and fixing new top made out of pre-laminated particle board 18 mm thick one side teak faced with 4 mm thick teakwood beading all around the top.

S&F new 25 mm MS Square tube not less than 1 mm thick

Repair to Table Center FD-274 Removing unserviceable parts of table center as follows, Supply and fixing new parts as per drg. Legs shall be made out of Ist class hard wood sheesham duly seasoned as per drg.

Top of Table centre shall be made out of 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the sutter all as shown in drawing and as directed by Engineer-in-Charge.

TABLE BED SIDE :- Fd-28,210,212,248,276 M&L in replacement side plank (left or right) of table bed side 18/19 mm thick prelaminated particle board bonded with phenol formal dehyde exterior grade fixed with screw and fevicol all as shown in drawing and as directed by Engineer-in-Charge.

M&L in replacement top of table bed side, 18/19 mm thick prelaminated particle board fixed with screw all as shown in drawing and as directed by Engineer-in-Charge

M&L in replacement self of table bed side 18/19 mm thich prelaminated particle board complete all as shown in drawing and as directed by Engineer-in-Charge.

M&L in replacement legs of table bed side 1st class hard wood (teak) duly finished to match with existing and made out in shape, fixed with screw all as shown in drawing and as directed by Engineer-in-Charge.

SIDE BOARD FD-26M 241 M&L in replacement ply back of side board 6mm thick, both side commercial faces ISI mark fixed with nails and fevicol all as shown in drawing and as directed by Engineer-in-Charge.

M&L in replacement side ply (left or right) of side board 12 mm thick, ISI mark fixed with suitable nails and fevicol on frame all as shown in drawing and as directed by Engineer-in-Charge.

M&L in replacement of shutter of side board 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the sutter all as shown in drawing and as directed by Engineer-in-Charge.

M&L in replacement 40 mm wide continuous piano hinges fixed with suitable size screw all as shown in drawing and as directed by Engineer-in-Charge.

M&L in replacement front and rear plank of drawer, 1st class hard wood (teak) plank made out in shape duly finished to match with existing complete all as shown in drawing and as directed by Engineer-in-Charge.

Book Case Steel FD-1028/1026 M&L in replacement of steel handle with new handle of size 100mm long (ISI Marked) to fix in shutter of compartment, where required to match with existing all as shown in drg and as directed by Engr-in-Charge.

M&L in replacement of locking device with lock 50mm dia four lever for bookcase steel to fixed by machine screw all as shown in drg and as directed by Engr-in-Charge.

M&L in replacement of brocken glass 5.5mm thick to shutter of compartment, swhere required to match with existing all as shown in drg and as directed by Engr-in-Charge.

Removing unserviceable shutter of book case steel and fixing new shutter as per drg, thickness of sheet shall be minimum 1 mm thick

Removing unserviceable legs of book case steel and fixing new legs as per drg, thickness of sheet shall be minimum 1 mm thick

Sofa Set Four/Five Seater FD-281 Removing of old unserviceable legs and S & F of new first class hard teak wooden legs size of 70 mm x 35 mm in section

Removing of old unserviceable wooden arm and S & F of new first class hard teak wooden arm

Removing of old unserviceable wooden front rail and S & F of new first class hard teak wooden front rail size of 35 mm x 100 mm

Removing of old unserviceable wooden Back rail and S & F of new first class hard teak wooden back rail size of 35 mm x 100 mm

Removing of old unserviceable seat wooden battens and S & F of new first class hard teak wooden battens size of 50 mm x 20 mm

Removing of old unserviceable back frame wooden battens and S & F of new first class hard teak wooden batten size of 50 mm x 20 mm

M&L in replacement of existing old wornout unserviceable cushion seat 560x530x100mm, 32/48 density, cool foam/ ISI mark covered with tapestry cloth, costing not less than Rs. 250/- per RM all as shown in drawing and as directed by Engineer-in-Charge.

Chair Revolving Tilting Low back & high back/Executive Repair of Chair revolving tilting low/high back and executives hydraulic system and Supply and refix the system with replacing of old unserviceable.

Removing of old unserviceable seat and back of all chairs and S & F of very fine quality Tapestry cloth in the existing place as directed by the Engineeer-in -charge.

S & F of high quality ISI marked rolling wheels of bottom of chair revolving low and high back/executive with replacing of old unservicesable wheels.

Teapoy verandah FD-208 & 255 M&L in replacement 900x450x18/19mm thick prelaminated particle board, Teapoy Verandah Top, phenol formal dehyde bonded, one side teak wood finish and other side white in colour lamination duly 4mm thick TW beading duly polished around the top fixed with 30/35mm long MS wooden screw on frame including preparing the steel surfaces and applying one coat of synthetic enamel paint on the frame complete all as shown in drawing and as directed by Engineer-in-Charge.

M&L in replacement of legs 20mm dia of mild steel conduit pipe 1.6mm thickness made to "U" shape with 25mm x 3mm flat iron frame welded to conduit pipe, all as shown in drg or as directed by Engr-in-Charge.

S & F MS tube not less than 1 mm thickness

Gas / Electric semless welding Gas / Electric seamlesse welding 6 mm thick to various steel furniture members and components where required including grinding filling the welding surface to match the existing surface complete.

Recanning of chairs Re-canning to chair easy, chair dining, chair writing, chair BKA, stool dressing, Bin soiled linen etc with cane plastic 2 mm width oval or boarder of 3 mm wide all around of best quality make premier in Godrej pattern complete as shown on drg and directed. Chair dining

Chair Writing

Chair Easy

Chair Verandah

Chair Stool dressing CB

Bin Soiled linen

Polishing of wooden furniture Polishing shall be done with french polish, after preparation of surface with best quality french polish, of shade as approved by GE. (a) Preparation of surface: All unevenness shall be rubbed down to smoothness with sand paper and the surface shall be well prepared. The pores holes in the wood shall be filled with paste made out of white (chalk) mitti burnt sar-sena before polishing:- Almirah large wdn with shelves

Almirah med wdn with shelves

Almirah mess utensil

Book case

Book shelf open large wdn

Charpoy newar / Bed newar

Bed hard / Bed plywood top

Chair wdn bottom

Chair writing

Chair easy

Chair dining

Table 3'x2' without drawer

Table 3'x2' with drawer

Table peg

Teapoy wooden

Sleeping platform

Table office clk wdn

Sofa set 5 seater

Sofa set 4 seater

Locker bed side

Table 3'x3' (900 x 900 mm)

Table writing

Table dining 6 pers

Table dining 8 pers

Table office offrs wdn

Charpoy wdn double bunk

Table centre

Table bed side

Chair CBA spl w/hand rest

Chair dining long back

Rack record 6'x2'x6'

Stool dressing CB

Side board

Table dressing ladies with mirror

Table dressing gents with mirror

Painting to steel furniture a) Painting shall be done after removing of dents of steel surface. Putty shall be applied in dental surfaces directed by Engr-in-Charge to make surface flesh with existing surface. Putty shall be of good quality as approved by the GE. b) Painting shall be done with one coat of OG/Black/white paint (spray painting) both inside and outside of all furniture articles as per the direction of Engineer-In-charge before commencement of painting work preparation of surface shall be got approved from the Engr-in-Charge then apply the coat of painting on whole surface shall be applied on dental surface and additional one coat of paint shall be provided on the same surface:- Almirah steel large with shelves

Almirah steel med with shelves

Chair tubular steel with arms

Chair tubular steel without arms

Form with back (Frame only)

Form without back (Frame only)

Table office offrs steel

Table office clk steel

Chair verandha

Locker bed side steel

Table dining OR (Frame only)

FMN set of all Charpoy GI Pipe nylon newar & Ply top/Bed hard

Table 3'x2' without drawer steel

Table 3'x2' with drawer steel

Tresstle store room steel

Riffle rack for 16/30/60 rifles

Charpoy with hard top MAP-II/I

Teapoy verandha

M/S BASHIR AHMAD AND SONS

TULSI RAINA AND SONS