BALANCE WORK FOR CONSTRUCTION OF SECURITY BARRACK AT 400 KV GIS SUBSTATION CHANDWA UNDER JIPP A1 PROJECT

Name of Package : Balance work for construction of Security Barrack at 400 KV GIS Substation Chandwa under JIPP A1 Project

Package No : NIT-464

Contract Period 8 Months

: Attachments : General guidelines for filling up the Attachments : CT Analyser -NIT-464 :

Balance work for construction of Security Barrack at 400 KV GIS Substation Chandwa under JIPP A1 Project

Specification No.: 5002004298

1 Fill up only green shaded cells in the relevent attachments.

2 Attachments 3(QR), 4, 5, 6, 7, 9, 10, 11, 12, 13,14, 15, 16, 17 and Bid Form for 1st Envelope are included here.

3 Attachment 1 Bid Security : To be submitted as per proforma provided in the bidding document.

4 Attachment 2 Power of Attorney : No specific format is provided by POWERGRID. Bidder may use their own format.

5 Attachment 8 Manufacturer’s Authorisation Form : To be furnished as per proforma provided in the bidding document, on the letter head of the each Manufactures proposed to supply main items. This attachment is not included here.

6 Attachment 14 Integrity Pact : To be submitted as per ITB Clause No. 9.3(n) and as per remarks in the Attach 14-IP.

पावर ग्रिड कारपोरेशन ऑफ इण्डिया लिमिटेड

(भारत सरकार का उद्यम)

Power Grid Corporation of India Limited

(A Government of India Enterprises)

Balance work for construction of Security Barrack at 400 KV GIS Substation Chandwa under JIPP A1 Project

5002004298 Individual Firm 1

Licensee of a Manufacturer 2

Enter following details of the bidder Representative of a Manufacturer

Specify type of Bidder [Select from drop down menu] #REF!

Name of Lead Partner

Address of Registered Office …….. …… ………. ……….

Name of Other Partner …….. …… ………. ……….

Printed Name …….. …… ………. ………. 01/Dec/25

Designation …….. …… ………. ……….

RFX No. :5002004298 Attachment-3(JV) NIT-464 #REF! NIT-464

Balance work for construction of Security Barrack at 400 KV GIS Substation Chandwa under JIPP A1 Project

(Joint Venture Agreement and Power of Attorney for Joint Venture*)

Bidder’s Name and Address (Lead Partner) : To:

Contracts and Materials #REF!

Name : Power Grid Corporation of India Ltd.,

Address : …….. …… ………. ………. "Saudamini", Plot No. 2, Sector 29

…….. …… ………. ………. Gurgaon (Haryana) - 122001

Name(s) and Addresse(s) of other partner(s)

Name : #REF! #REF!

Address : #REF! #REF!

The Joint Venture Agreement (as per the proforma attached at no. 15 in Section-VI, Sample Forms and Procedures, Conditions of Contract, Vol.-I of the Bidding Documents) and Power of Attorney for Joint Venture (as per the proforma attached at no. 14 in Section-VI, Sample Forms and Procedures, Conditions of Contract, Vol.-I of the Bidding Documents) are enclosed herewith.

Date : Printed Name : …….. …… ………. ………. 0

RFX No. :5002004298 Attachment-3(QR) NIT-464

Balance work for construction of Security Barrack at 400 KV GIS Substation Chandwa under JIPP A1 Project

(Qualifying Requirement Data)

Bidder’s Name and Address (Lead Partner) : To:

Contracts and Materials

Name : Power Grid Corporation of India Ltd.,

Address : …….. …… ………. ………. Eastern Region Transmission System-I

…….. …… ………. ………. Vidut Board Colony,

…….. …… ………. ………. Shastri Nagar Patna 800023

For our Qualifying Requirements Data, please refer Schedule-QR of this volume.

Date : Printed Name : …….. …… ………. ……….

RFX No. :5002004298 Attachment-4 NIT-464

Balance work for construction of Security Barrack at 400 KV GIS Substation Chandwa under JIPP A1 Project

(Form of Certificate of Origin and Eligibility)

Bidder’s Name and Address (Lead Partner) : To:

Contracts and Materials

Name : Power Grid Corporation of India Ltd.,

Address : …….. …… ………. ………. Eastern Region Transmission System-I

…….. …… ………. ………. Vidut Board Colony,

…….. …… ………. ………. Shastri Nagar Patna 800023

We hereby certify that equipment and materials to be supplied are produced in [Enter the name of country where from equipments & material shall be supplied] eligible source country. Equipments & Materials produced in [Name of countries] Company incorporated & registered in [Name of countries]

We hereby certify that our company is incorporated and registered in [Enter the name of country where from equipments & material shall be supplied] eligible source country.

Date : Printed Name : …….. …… ………. ……….

country. country. [Enter the name of country where from equipments & material shall be supplied] [Enter the name of country where from equipments & material shall be supplied]

RFX No. :5002004298 Attachment-4(A) NIT-464

Balance work for construction of Security Barrack at 400 KV GIS Substation Chandwa under JIPP A1 Project

(List of Special Maintenance Tools & Tackles)

Bidder’s Name and Address (Lead Partner) : To:

Contracts and Materials

Name : Power Grid Corporation of India Ltd.,

Address : …….. …… ………. ………. "Saudamini", Plot No. 2, Sector 29

…….. …… ………. ………. Gurgaon (Haryana) - 122001

We are furnishing below the list of special maintenance tools & tackles for various equipment under the subject package. The prices for these tools & tackles are included in our lumpsum bid price. We further confirm that the list of special maintenance tools & tackles includes all the items specifically identified in your bidding documents as brought out below:

Notwithstanding what is stated above, we further confirm that any additional special maintenance tools and tackles, required for the equipment under this package shall be furnished by us at no extra cost to the employer.

S.No. For Equipment Item Description Unit Quantity

Date : Printed Name : …….. …… ………. ……….

RFX No. :5002004298 Attachment-4(B) NIT-464

Balance work for construction of Security Barrack at 400 KV GIS Substation Chandwa under JIPP A1 Project

(List of Special Maintenance Tools & Tackles)

Bidder’s Name and Address (Lead Partner) : To:

Contracts and Materials

Name : Power Grid Corporation of India Ltd.,

Address : …….. …… ………. ………. "Saudamini", Plot No. 2, Sector 29

…….. …… ………. ………. Gurgaon (Haryana) - 122001

We are furnishing below the list of special maintenance tools & tackles for various equipment under the subject package. The prices for these tools & tackles which are to be taken back after the completion of the work by us are not included in our lumpsum bid price. We further confirm that the list of special maintenance tools & tackles includes all the items specifically identified in your bidding documents as brought out below:

Date : Printed Name : …….. …… ………. ……….

RFX No. :5002004298 Attachment-5 NIT-464

Balance work for construction of Security Barrack at 400 KV GIS Substation Chandwa under JIPP A1 Project

(Bought-out & Sub-contracted Items)

Bidder’s Name and Address (Lead Partner) : To:

Contracts and Materials

Name : Power Grid Corporation of India Ltd.,

Address : …….. …… ………. ………. Eastern Region Transmission System-I

…….. …… ………. ………. Vidut Board Colony,

…….. …… ………. ………. Shastri Nagar Patna 800023

We hereby furnish the details of the items/ sub-assemblies, we propose to buy for the purpose of the subject Package:

Sl. No. Item Description Quantity proposed to be bought/sub-contracted Details of the proposed sub-contractor/sub-vendor

Name Nationality

We hereby furnish the details of the items/ sub-assemblies propose to supply from our own works (i.e. as direct transactions) in additiona to the supplies the same from other vendors (i.e. as Bought-out transactions) as detailed in the table given above.

Sl. No. Item Description Quantity proposed to be supplied Details of the plant from where supplies are proposed.

Name of Plant Address

Date : Printed Name : …….. …… ………. ……….

RFX No. :5002004298 Attachment-5 NIT-464

(Bought-out & Sub-contracted Items)

Sl. No. Item Description Quantity proposed to be bought/sub-contracted Details of the proposed sub-contractor/sub-vendor

Name Nationality

Date : Printed Name : …….. …… ………. ……….

RFX No. :5002004298 Attachment-6 NIT-464

Balance work for construction of Security Barrack at 400 KV GIS Substation Chandwa under JIPP A1 Project

Bidder’s Name and Address (Lead Partner) : To:

Contracts and Materials

Name : Power Grid Corporation of India Ltd.,

Address : …….. …… ………. ………. Eastern Region Transmission System-I

…….. …… ………. ………. Vidut Board Colony,

…….. …… ………. ………. Shastri Nagar Patna 800023

The bidder shall itemize any deviation from the Specifications included in his bid. Each item shall be listed (separate sheets may be used and enclosed with this Attachment) with the following information:

Sl. No. Reference clause in the Specifications Deviation Cost of withdrawal of the deviation

The above deviations and variations are exhaustive. We confirm that we shall withdraw the deviations proposed by us at the cost of withdrawal indicated in this attachment, failing which our bid may be rejected and Bid Security forfeited.

Date : Printed Name : …….. …… ………. ……….

RFX No. :5002004298 Attachment-6 NIT-464

Sl. No. Reference clause in the Specifications Deviation Cost of withdrawal of the deviation

Date : Printed Name : …….. …… ………. ……….

RFX No. :5002004298 Attachment-7 NIT-464

Balance work for construction of Security Barrack at 400 KV GIS Substation Chandwa under JIPP A1 Project

(Details of Alternative Bid)

Bidder’s Name and Address (Lead Partner) : To:

Contracts and Materials

Name : Power Grid Corporation of India Ltd.,

Address : …….. …… ………. ………. Eastern Region Transmission System-I

…….. …… ………. ………. Vidut Board Colony,

…….. …… ………. ………. Shastri Nagar Patna 800023

No Alternative Bid

Date : Printed Name : …….. …… ………. ……….

RFX No. :5002004298 Attachment-8 NIT-464

Balance work for construction of Security Barrack at 400 KV GIS Substation Chandwa under JIPP A1 Project

(Manufacturer's Authorization Form)

Contracts and Materials

Power Grid Corporation of India Ltd.,

"Saudamini", Plot No. 2, Sector 29

Gurgaon (Haryana) - 122001 Name of Manufecture Name/Description of Goods Factory Address Name & Address of Bidder package name alongwith project name

…(insert name of the Manufacturer) .. …(insert name and/or description of the goods) … ..(insert address of factory) .. Balance work for construction of Security Barrack at 400 KV GIS Substation Chandwa under JIPP A1 Project

WE …(insert name of the Manufacturer) .. who are established and reputable manufacturers of …(insert name and/or description of the goods) …. having production facilities at ..(insert address of factory) .., , , do hereby authorize , …….. …… ………. ………., …….. …… ………. ………., …….. …… ………. ……….(hereinafter, the “Bidder”) to submit a bid, and subsequently negotiate and sign the Contract with you against IFB for Balance work for construction of Security Barrack at 400 KV GIS Substation Chandwa under JIPP A1 Project including the above plant & equipment or other goods produced by us. 0

WE …(insert name of the Manufacturer) .. who are established and reputable manufacturers of …(insert name and/or description of the goods) …. having production facilities at We hereby extend our full guarantee and warranty for the above specified goods offered supporting the supply by the Bidder against these Bidding Documents, and duly authorize said Bidder to act on our behalf in fulfilling these guarantee and warranty obligations.

We hereby extend our full guarantee and warranty for the above specified goods offered supporting the supply by the Bidder against these Bidding Documents, and duly authorize said Bidder to act on our behalf in fulfilling these guarantee and warranty obligations. We also hereby declare that we and have entered into a formal relationship in which, during the duration of the Contract (including warranty/defects liability). We, the Manufacturer or Producer, will make our technical and engineering staff fully available to the technical and engineering staff of the successful Bidder to assist that Bidder, on a reasonable and best effort basis, in the performance of all its obligations to the Purchaser under the Contract. ..(insert address of factory) .., , , do hereby authorize , …….. …… ………. ………., …….. …… ………. ………., …….. …… ………. ……….(hereinafter, the “Bidder”) We also hereby declare that we and have entered into a formal relationship in which, during the duration of the Contract (including warranty/defects liability).

For and on behalf of the …(insert name of the Manufacturer) .. to submit a bid, and subsequently negotiate and sign the Contract with you against IFB for Balance work for construction of Security Barrack at 400 KV GIS Substation Chandwa under JIPP A1 Project including the above plant & equipment or other goods produced by us. We, the Manufacturer or Producer, will make our technical and engineering staff fully available to the technical and engineering staff of the successful Bidder to assist that Bidder, on a reasonable and best effort basis, in the performance of all its obligations to the Purchaser under the Contract.

In the capacity of

Date : Printed Name : …….. …… ………. ……….

Note :1 The letter of Undertaking should be on the letterhead of the Manufacturer and should be signed by a person competent and having Power of Attorney to legally bind the Manufacturer. It shall be included by the bidder in its bid.

2 Above undertaking shall be registered or notarized so as to be legally enforceable.

RFX No. :5002004298 Attachment-9 NIT-464

Balance work for construction of Security Barrack at 400 KV GIS Substation Chandwa under JIPP A1 Project

(Work Completion Schedule)

Bidder’s Name and Address (Lead Partner) : To:

Contracts and Materials

Name : Power Grid Corporation of India Ltd.,

Address : …….. …… ………. ………. Eastern Region Transmission System-I

…….. …… ………. ………. Vidut Board Colony,

…….. …… ………. ………. Shastri Nagar Patna 800023

We hereby declare that the following Delivery Schedule shall be followed by us for the subject Package i.e., Balance work for construction of Security Barrack at 400 KV GIS Substation Chandwa under JIPP A1 Project for the period commencing from the effective date of Contract to us :

Sl. No. Description of Work Period in months from the effective date of Contract

1 Submission of drawings for Approval

2 Production of samples for type testing

3 Completion of type tests

4 Commencement of Commercial Production

5 Offer of material for pre-despatch testing and inspection

6 Commencement of shipment

1 Completion of shipment (Receipt at final destination Site)

Date : Printed Name : …….. …… ………. ……….

RFX No. :5002004298 Attachment-10 NIT-464

Balance work for construction of Security Barrack at 400 KV GIS Substation Chandwa under JIPP A1 Project

(Guarantee Declaration)

Bidder’s Name and Address (Lead Partner) : To:

Contracts and Materials

Name : Power Grid Corporation of India Ltd.,

Address : …….. …… ………. ………. Eastern Region Transmission System-I

…….. …… ………. ………. Vidut Board Colony,

…….. …… ………. ………. Shastri Nagar Patna 800023

We conform that the equipments offered shall have minimum performance specified in Technical Specification. We further guarantee the performance/efficiency of the equipments in response to the Technical Specifications.

Date : Printed Name : …….. …… ………. ……….

RFX No. :5002004298 Attachment-11 NIT-464

Balance work for construction of Security Barrack at 400 KV GIS Substation Chandwa under JIPP A1 Project

(Information regarding Ex-employees of POWERGRID in our Organisation)

Bidder’s Name and Address (Lead Partner) : To:

Contracts and Materials

Name : Power Grid Corporation of India Ltd.,

Address : …….. …… ………. ………. Eastern Region Transmission System-I

…….. …… ………. ………. Vidut Board Colony,

…….. …… ………. ………. Shastri Nagar Patna 800023

We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation

Date : Printed Name : …….. …… ………. ……….

RFX No. :5002004298 Attachment-11 NIT-464

Balance work for construction of Security Barrack at 400 KV GIS Substation Chandwa under JIPP A1 Project

(Information regarding Ex-employees of POWERGRID in our Organisation)

Name of Other Partner To:

Contracts and Materials

Name : …….. …… ………. ………. Power Grid Corporation of India Ltd.,

Address : …….. …… ………. ………. Eastern Region Transmission System-I

…….. …… ………. ………. Vidut Board Colony,

We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation

Date : Printed Name : …….. …… ………. ……….

RFX No. :5002004298 Attachment-12 NIT-464

Balance work for construction of Security Barrack at 400 KV GIS Substation Chandwa under JIPP A1 Project

(Price Adjustment Data)

Bidder’s Name and Address (Lead Partner) : To:

Contracts and Materials

Name : Power Grid Corporation of India Ltd.,

Address : …….. …… ………. ………. Eastern Region Transmission System-I

…….. …… ………. ………. Vidut Board Colony,

…….. …… ………. ………. Shastri Nagar Patna 800023

We hereby furnish the relevant details pertaining to the price adjustment provisions for equipment as specified in your specifications and documents for the Balance work for construction of Security Barrack at 400 KV GIS Substation Chandwa under JIPP A1 Project The necessary documentary evidence are enclosed :

Sl. No. Name of Materials Value of co-efficient Name of the published index * Value of index as 30 days prior to date set for opening of bids as on **

1 EC grade aluminium ingots, co-eifciant a = 0.65 CACMAI

High Tensile Galvanised Steel wires , co-efficient b = 0.15 CACMAI FALSE FALSE

High Carbon Steel Rods , co-efficient b = High Tensile Galvanised Steel wires , co-efficient b =

High Grade Electrolytic Zinc , co-efficient c =

3 Labour, Co-efficient l= 0.05 Indian Labour Bureau, Shimla, Govt. of India (monthly) (Base: 2001 = 100) (www.labourbureau.nic.in)

Note: * Indicate the publisher of the index.

** Indicate the date of indices for which the values are being furnished.

^ For bidders who intend to quote their prices based on High Tensile Galvanised Steel wire, the coefficient for the same (i.e. coefficient ’b’ for High Tensile Galvanised Steel wire) shall be 0.15 and coefficient ‘c’ shall not be applicable.

Date : Printed Name : …….. …… ………. ……….

RFX No. :5002004298 Attachment-13 NIT-464

Balance work for construction of Security Barrack at 400 KV GIS Substation Chandwa under JIPP A1 Project

(Declaration regarding Social Accountability)

Bidder’s Name and Address (Lead Partner) : To:

Contracts and Materials

Name : Power Grid Corporation of India Ltd.,

Address : …….. …… ………. ………. Eastern Region Transmission System-I

…….. …… ………. ………. Vidut Board Colony,

…….. …… ………. ………. Shastri Nagar Patna 800023

We conform that we stand committed to comply to all requirements of Social Accountability Standards i.e., SA8000 (latest Standard available at www.sa-intl.org) and maintain the necessary records.

Date : Printed Name : …….. …… ………. ……….

RFX No. :5002004298 Attachment-14 NIT-464

Balance work for construction of Security Barrack at 400 KV GIS Substation Chandwa under JIPP A1 Project

Bidder’s Name and Address (Lead Partner) : To:

Contracts and Materials

Name : Power Grid Corporation of India Ltd.,

Address : …….. …… ………. ………. Eastern Region Transmission System-I

…….. …… ………. ………. Vidut Board Colony,

…….. …… ………. ………. Shastri Nagar Patna 800023

Bidders are required to submit 02 copy of Integrity Pact as per format enclosed at vol-I

Date : Printed Name : …….. …… ………. ……….

Instruction for printing & submitting Integrity Pact

1. The requisite format of Integrity Pact (if required)is attached in Vol-I of Bid Documents.

2. Take print out of first page on a non-judicial stamp paper of Rs. 100/- and other seven pages on plain A4 size paper. Such two sets shall be prepared by the bidder.

3. All the pages of both the copies of the Integrity Pact shall be signed by the authorised representative of the bidder and duly stamped.

4. Both the original copies shall be submitted by the bidder in the form of Hard Copy as part of the first envelope before due date & time of submission of the bid.

5. For further details bidders may please refer ITB Clause 9.3 (n).

Specification No. : 5002004298 Attachment-15 NIT-464

Balance work for construction of Security Barrack at 400 KV GIS Substation Chandwa under JIPP A1 Project

(Information for E-payment, PF details and declaration for Micro/Small and Medium Enterprise)

Bidder's Name and Address (Sole Bidder [Individual Firm]): To:

Contracts and Materials

Name: 0 Power Grid Corporation of India Ltd.,

Address: …….. …… ………. ………. Eastern Region Transmission System-I

…….. …… ………. ………. Vidyut Board Colony,

…….. …… ………. ………. Shastri Nagar Patna 800023

We are furishing the following details of Statutory Registration Numbers and details of Bank for electronic payment

1 Name of the Supplier/ Contractor in whose favour payment is to be made

2 Address with PIN Code and State

Registered Office:

Correspondence Address:

3 Status- Company/others [Declaration of Micro/ Small/Medium Enterprtise ]

4 Permanent Account [PAN] No.

5 Goods & Services Tax [GST] No.

6 PF Registration No. Of the Company

7 PF Regional Office covered (with Address)

8 Name of Contact Person

9 Telephone No(s)

10 Bank Details for Electronic Payment

Name ofthe Bank:

Address of the Branch:

Type of Account: Savings/Current

11 9 digit MICR code printed at bottom in middle, next to cheque no.

12 IFSC (for RTGS)/NEFT Code (to be obtained from the Bank) Sample Cancelled Cheque to be enclosed

We hereby declare that the above information are true and correct and we agree that thepayment onaccount of this Contract, in the event of Award, be made in the above account maintained in theabove mentioned Bank.

RFX No. :5002004298 Attachment-16 NIT-464

Balance work for construction of Security Barrack at 400 KV GIS Substation Chandwa under JIPP A1 Project

(Additional Information)

Bidder’s Name and Address (Lead Partner) : To:

Contracts and Materials

Name : Power Grid Corporation of India Ltd.,

Address : ……………………………… Eastern Region Transmission System-I

…….. …… ………. ………. Vidut Board Colony,

…….. …… ………. ………. Shastri Nagar Patna 800023

In support of the additional information required as per ITB Sub-Clause 9.3 (p) of the Bidding Documents, we furnish herewith our data/details/documents etc., alongwith other information, as follows (the stipulations have been reproduced in italics for ready reference):

1.0 The Bidder shall furnish

A certificate from their Banker(s) (as per prescribed formats in Form 16, Section-VI: Sample Forms and Procedures) indicating various fund based/non fund based limits sanctioned to the Bidder and the extent of utilization as on date. Such certificate should have been issued not earlier than three months prior to the date of bid opening. Wherever necessary the Employer may make queries with the Bidders’ Bankers. [Reference ITB clause 9.3(p)(i)]

1.1 In accordance with 1.0, certificate(s) from banker as per requisite format, indicating various fund based/non fund based limits sanctioned to the bidder or each member of the joint venture and the extent of utilization as on date is/are enclosed, as per the following details:

Name of the (Lead Partner) :

Name of the Banker by whom certificate issued

Date of certificate (should not be earlier than 3 months prior to date of bid opening)

Whether fund based/non fund based limits are indicated in the certificate

Whether extent of utilization is indicated in the certificate

1.2 The Bidder should accordingly also provide the following information/documents

(i) Details of Banker:

Address of Banker

Contact Name and Title

(ii) As per para 1.0, Authorization Letter(s) from the bidder addressed to the Banker(s), authorizing POWERGRID to seek queries about the bidder with the Banker(s) and advising the Banker(s) to reply the same promptly, is/are enclosed as per following details:

Sl. No. Letter Ref. Date Addressed to (name of the Bank)

2.0 Litigation History

The bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the last five years. A consistent history of awards involving litigation against the Bidder or any partner of JV may result in rejection of Bid. [Reference ITB clause 9.3(p)(ii)]

2.1 Details of litigation history resulting from Contracts completed or under execution by the bidder over the last five years

Year Name of client, cause of litigation/arbitration and matter in dispute Details of Contract and date Award for or against the bidder Disputed amount

3.0 Description of the plant for carrying out the work

Bidders should provide information of the plant(s) for carrying out the work including the proposal of manufacturing methods in sufficient detail to demonstrate the adequacy of the bidder’s proposals to meet the technical specification.

4.0 OTHER INFORMATION

4.1 Current Contract Commitments of works in progress

Bidders should provide information on their current commitments on all contracts that have been awarded, or for which a letter of intent or acceptance has been received, or for contracts approaching completion, but for which an unqualified, full completion certificate has yet to be issued.

Details of Contract Type of Conductor Ordered Quantity as per Contract Balance Quantity to be supplied as on Completion Period for balance quantity

Commencement Completion

4.2 Financial Data:

Details Actual (Previous five years) Projection for next five years

Total Liability

Current Liability

Profit before taxes

Profit after taxes

Date : Printed Name : …….. …… ………. ……….

RFX No. :5002004298 Attachment-17 NIT-464

Balance work for construction of Security Barrack at 400 KV GIS Substation Chandwa under JIPP A1 Project

Bidder’s Name and Address (Lead Partner) : To:

Contracts and Materials

Name : Power Grid Corporation of India Ltd.,

Address : …….. …… ………. ………. Eastern Region Transmission System-I

…….. …… ………. ………. Vidut Board Colony,

…….. …… ………. ………. Shastri Nagar Patna 800023

Date : Printed Name : …….. …… ………. ……….

RFX No. :5002004298 Bid Form 1st Envelope NIT-464 1 one 1 st 1 January

2 two 2 nd 2 February

BID FORM (First Envelope) 3 three 3 rd 3 March

4 four 4 th 4 April

Bid Proposal Ref. No. 5 five 5 th 5 May

Date : 6 six 6 th #VALUE! 6 June

7 seven 7 th #VALUE! 7 July

To: 8 eight 8 th #VALUE! 8 August

Contracts and Materials 9 nine 9 th #VALUE! 9 September

Power Grid Corporation of India Ltd., 10 ten 10 th 10 October

Eastern Region Transmission System-I 11 eleven 11 th 11 November

Vidut Board Colony, 12 twelve 12 th 12 December

Shastri Nagar Patna 800023 13 thirteen 13 th

14 fourteen 14 th

Name of Contract : Balance work for construction of Security Barrack at 400 KV GIS Substation Chandwa under JIPP A1 Project 15 fifteen 15 th

Dear Ladies and/or Gentlemen, Enter details here. 16 sixteen 16 th

1.0 Having examined the Bidding Documents, including Amendment Nos. dated 00/01/1900 the receipt of which is hereby acknowledged, we the undersigned, offer to design, manufacture, test, deliver, install and commission (including carrying out Trial operation, Performance & Guarantee Test as per the provision of Technical Specification) the Facilities under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 9.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in two envelopes i.e. First Envelope – Techno – Commercial Part & Second Envelope - Price Part (to be opened subsequently). the receipt of which is hereby acknowledged, we the undersigned, offer to design, manufacture, test, deliver, install and commission (including carrying out Trial operation, Performance & Guarantee Test as per the provision of Technical Specification) the Facilities under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 9.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in two envelopes i.e. First Envelope – Techno – Commercial Part & Second Envelope - Price Part (to be opened subsequently). 17 seventeen 17 th

2.0 Attachments to the Bid Form (First Envelope) Bank Draft 18 eighteen 18 th

In line with the requirement of the Bidding Documents, we enclose herewith the following Attachments: Enter details here. Pay Order 19 nineteen 19 th

(b) Attachment 2(NIT-464) : A power of attorney duly authorized by a Notary Public indicating that the person(s) signing the bid have the authority to sign the bid and thus that the bid is binding upon us during the full period of its validity in accordance with the ITB Clause 14. Please note that if bid validity is less than 07 (seven) months, your bid may be rejected Bank Guarantee (0) 21 st

(c) Attachment 3(NIT-464) : The documentary evidence that we are eligible to bid in accordance with ITB Clause 2. Further, in terms of ITB Clause 9.3(c) & (e), the qualification data has been furnished as per your format enclosed with the bidding documents Attachment-3(QR). 22 th

#REF! Applicable 23 th

#REF! Not Applicable 24 th

(d) Attachment 4(NIT-464) : The documentary evidence establishing in accordance with ITB Clause 3, Vol.-I of the Bidding Documents that the facilities offered by us are eligible facilities and conform to the Bidding Documents has been furnished as Attachment 4. 25 th

(e) Attachment 5(NIT-464) : The details of all major items of services or supply which we propose subletting in case of award, giving details of the name and nationality of the proposed subcontractor/sub-vendor for each item. 26 th

(f) Attachment 6(NIT-464) : The variation and deviations from the requirements of the Conditions of Contract, Technical Specification and Drawings (excluding critical provisions as mentioned at clause 6.0 below) in your format enclosed with the Bidding Documents, including, inter alia, the cost of withdrawal of the variations and deviations indicated therein. 27 th

(g) Attachment 7(NIT-464) : The details of Alternative Bids made by us indicating the complete Technical Specifications and the deviation to contractual and commercial conditions. [NOT APPLICABLE] 28 th

(h) Attachment 8(NIT-464) : Manufacturer’s Authorisation Forms. 29 th

(i) Attachment 9(NIT-464) : Work Completion Schedule. 30 th

(j) Attachment 10(NIT-464): Guarantee Declaration. 31 st

(k) Attachment 11(NIT-464): Information regarding ex-employees of Purchaser in our firm.

(l) Attachment 12(NIT-464): Filled up information regarding Price Adjustment Data as per the format enclosed in the bidding documents.[NOT APPLICABLE]

(m) Attachment 13(NIT-464): Declaration regarding Social Accountability.

(n) Attachment 14(NIT-464): Integrity Pact, in a separate envelope, duly signed on each page by the person signing the bid.[NOT APPLICABLE]

(o) Attachment 15(NIT-464): Information for E-payment, PF Details & declaration regarding Micro/Small & Medium Enterprises.

(p) Attachment 16(NIT-464): Additional Information.

(q) Attachment 17(NIT-464): Declaration.

3.0 We are aware that, in line with Clause No. 27.1 (ITB), our Second Envelope (Price Part) is liable to be rejected in case the same contains any deviation/omission from the contractual and commercial conditions and technical Specifications other than those identified in this First Envelope.

4.0 We confirm that except as otherwise specifically provided our Bid Prices in Second Envelope include all taxes, duties, levies and charges as may be assessed on us, our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Goods, in and outside of India.

4.1 100% of applicable Taxes and Duties, which are payable by the Purchaser under the Contract, shall be reimbursed by the Purchaser after despatch of goods on production of satisfactory documentary evidence by the Supplier in accordance with the provisions of the Bidding Documents.

4.3 We also understand that, in case of award on us, you shall reimburse to us octroi/entry tax as applicable for destination site/state on all items of supply. Further, Service Tax, if applicable, for the services to be rendered by us, the same is included in our bid price in Second Envelope.

4.4 We confirm that we shall also get registered with the concerned Sales Tax Authorities, in all the states where the project is located.

5.0 Construction of the Contract

5.1 We declare that we have studied clause GCC 2.1 relating to mode of contracting for Domestic Bidders and we are making this proposal with a stipulation that you shall award us the Contracts covering all goods and related services.

6.0 We have read the provisions of following clauses and confirm that the specified stipulations of these clauses are acceptable to us:

[a] Bid document Fee Clause 3.0 of SCC.

[b] Bid Security/ Bid Guarantee Clause No 13.0, ITB, Section -II, and cl. 4.0 of SCC, Section-IV, Volume-I.

[c] Terms of Payment Clause No.64.0, Conditions of Contract (GCC) & Clause 12.0, SCC

[d] Contract Performance Guarantee/Performance Security Clause No.14, Section GCC, Vol.-I, Conditions of Contract & Clause 13.0 of SCC, Section-IV, Vol-I.

[e] Liquidated Damages Clause No 11.0 of SCC, Volume-I

[f] Price & Price Basis Clause No 11.0 of ITB,

[g] Guarantee & Defect Liability Period Cl.No.45.0 & 46.0 Section. GCC, Vol. I, Conditions of Contract & Clause 9.0 of SCC, Volume- I

[h] Work schedule Clause No. 10.0 of SCC, Volume -I

Further we understand that deviation taken in any of the above clauses by us may make our bid non-responsive as per provision of bidding documents and be rejected by you.

7.0 We undertake, if our bid is accepted, to commence the work immediately upon your Notification of Award to us, and to achieve the delivery of goods and related services within the time stated in the Bidding Documents.

8.0 If our bid is accepted, we undertake to provide an Advance Payment Security and Performance Security(ies) in the form and amounts, and within the times specified in the Bidding Documents.

9.0 We agree to abide by this bid for a period of six (06) months from the date fixed for opening of bids as stipulated in the Bidding Documents, and it shall remain binding upon us and may be accepted by you at any time before the expiration of that period

10.0 Until a formal Contract is prepared and executed between us, this bid, together with your written acceptance thereof in the form of your Notification of Award shall constitute a binding contract between us.

11.0 We understand that you are not bound to accept the lowest or any bid you may receive.

12.0 Commissions or gratuities, if any, paid or to be paid by us to agents relating to this Bid, and to contract execution, if we are awarded the contract, are listed below:

Name and address of agent Amount and Currency Purpose of Commission or gratuity

(If none, state “none”)

13.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.

Thanking you, we remain,

Yours faithfully,

For and on behalf of

Date : Printed Name : …….. …… ………. ……….

Please provide additional information of the Bidder

Business Address :

Country of Incorporation :

State/Province to be indicated :

Name of Principal Officer :

Address of Principal Officer :

Note: Bidders may note that no prescribed proforma has been enclosed for Attachment 2 (NIT-464) : Power of Attorney. Bidders may use their own proforma for furnishing the required information with the bid.

ElectronicForms™

View - Template of ElectronicForm™

To close this Screen, click on the [Close] button located on the bar above, or at the bottom of the Screen

Template of ElectronicForm™

Relevant Bid-Part Techical

ElectronicForm™ Template ID 7PG-2010-FT000010

Template Reference TECHNO-COMMERICIAL (First Envelope)

Template Description Tower Package NIT-464 RFX No. : 5002004298

Balance work for construction of Security Barrack at 400 KV GIS Substation Chandwa under JIPP A1 Project

Bidders's Name #REF!

Section-2 (Outline of Requirements)

* 1 Integrity Pact Details

Submitted (Doc. Code No. DC-9008-April-2009-Rev-0) Yes

* 2 BID SECURITY DETAILS

2 (a) Submitted Yes

* 2 (b) Bid Security No.

* 2 (c) Issued by (Name of Bank)

* 2 (d) Bid Security Amount 0 0.00

* 2 (e) Valid upto

* 1. AUTHORIZED SIGNATORY (Sole Bidder / Lead Partner of JV)

1 (b) Designation …….. …… ………. ……….

2. AUTHORIZED SIGNATORY (Other Partner of JV)

(If Bidder is JV)

2 (a) Name #REF!

2 (b) Designation #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

#REF! #REF! #REF!

23 Twenty Three

27 Twenty Seven

28 Twenty Eight

33 Thirty Three

37 Thirty Seven

38 Thirty Eight

73 Seventy Three

74 Seventy Four

75 Seventy Five

77 Seventy Seven

78 Seventy Eight

79 Seventy Nine

83 Eighty Three

87 Eighty Seven

88 Eighty Eight

93 Ninety Three

97 Ninety Seven

98 Ninety Eight

100 One Hundred

Name of the Package Balance work for construction of Security Barrack at 400 KV GIS Substation Chandwa under JIPP A1 Project

Balance work for construction of Security Barrack at 400 KV GIS Substation Chandwa under JIPP A1 Project

1 Fill only Green shaded cells in Details and Schedule-I.

2 All the cells in Summary will be auto filled, therefore no cell is required to be filled in that sheet.

3 Instructions ,if any will be displayed automatically after selecting the cell.

Click here to proceed.

पावर ग्रिड कारपोरेशन ऑफ इण्डिया लिमिटेड

(भारत सरकार का उद्यम)

Power Grid Corporation of India Limited

(A Government of India Enterprises)

Balance work for construction of Security Barrack at 400 KV GIS Substation Chandwa under JIPP A1 Project

Enter the following details of the bidder

Name of the bidder

Alternative E-mail

BOQ OF BALANCE WORK FOR 20 BEDED SECURITY GUARD RESIDENCE FOR GIS CHANDWA

S.N. DSR23 DSR Rate DESCRIPTION UNIT QTY Rate AMOUNT

SECTION-I (EARTH WORK AND SAND FILLING IN FOUNDATION AND PLINTH)

1 2.8 Earth work in excavation by mechanical means ( Hydraulic excavator)/ manual means in foundation trenches or drains (not exceding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

2 2.26.1 ₹ 104.50 Extra for every additional lift of 1.5 m or part thereof in . All kinds of soil. Cum 22.00 ₹ 88.56 ₹ 1,948.31

3 2.25 ₹ 196.00 Filling available excavated earth(excluding rock) in trenches , plinth, sides of foundations etc. in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. Cum 0.00 ₹ 166.10 ₹ 0.00

4 2.27 ₹ 2,123.75 Supplying and filling in plinth with local sand under floors including, watering, ramming consolidating and dressing complete. Cum 87.14 ₹ 1,799.79 ₹ 156,837.43

5 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-all work upto plinth level. ₹ 0.00

4.1.5 ₹ 7,294.70 1:3:6 ( 1 Cement:3 coarse sand: 6 graded stone aggregate 20 mm nominal size) Cum 0.00 ₹ 6,181.95 ₹ 0.00

6 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-all work upto plinth level. ₹ 0.00

4.1.3 ₹ 7,878.50 1:2:4 ( 1 Cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) Sqm 15.00 ₹ 6,676.69 ₹ 100,150.42

7 5.1 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-all work upto plinth level. ₹ 0.00

5.1.2 ₹ 9,045.75 1:1:5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) Cum 10.62 ₹ 7,665.89 ₹ 81,427.24

8 6.1 Brick work with F.P.S bricks of class designation 75 in foundation and plinth in: ₹ 0.00

6.1.2 ₹ 7,132.25 Cement mortar 1:6 ( 1 cement: 6 coarse sand) Cum 11.00 ₹ 6,044.28 ₹ 66,487.08

9 DSR ANALYSIS ₹ 551.32 Providing brick of class designation 75 in one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per specification and direction of Engineer-in-charge. Sqm 222.61 ₹ 467.22 ₹ 104,009.98

SECTION-II (RCC / PCC WORK) ₹ 0.00

10 5.2 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upto floor five level excluding cost of centring, shuttering, finishing, and reinforcement. ₹ 0.00

5.2.2 ₹ 10,852.95 1:1:5:3 ( 1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) Cum 0.00 ₹ 9,197.42 ₹ 0.00

11 5.3 ₹ 11,505.50 Reinforced cement concrete work in roof beams, suspended floors, roofs having slope upto 15 degree, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:11/2:3 ( 1 cement: 11/2 coarse sand: 3 graded stone aggregate 20 mm nominal size). Cum 3.93 ₹ 9,750.42 ₹ 38,319.17

12 a) 4.10 ₹ 410.85 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone aggregate 12.5 mm nominal size) Sqm 3.74 ₹ 348.18 ₹ 1,302.19

(b) 4.13 ₹ 146.15 Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil. Sqm 3.74 ₹ 123.86 ₹ 463.22

13 5.22 Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete. ₹ 0.00

5.22.6 ₹ 107.85 Thermo-mechanically treated bars Kg 1800.34 ₹ 91.40 ₹ 164,548.02

14 5.9 Centring and shuttering including strutting, propping etc. and removal of form for: ₹ 0.00

a 5.9.1 ₹ 392.15 Foundation, footings, bases of columns etc. for mass concrete Sqm 0.00 ₹ 332.33 ₹ 0.00

b 5.9.3 ₹ 927.25 Suspended floors, roofs, landings, balconies and access platform. Sqm 4.20 ₹ 785.81 ₹ 3,300.38

c 5.9.4 ₹ 927.25 Shelves (Cast in situ) Sqm 35.00 ₹ 785.81 ₹ 27,503.18

d 5.9.5 ₹ 736.40 Lintels, beams, plinth beams, girders, bressumers and cantilevers. Sqm 4.54 ₹ 624.07 ₹ 2,834.52

e 5.9.6 ₹ 961.30 Columns, Pillars, Piers, Abutments, Posts and Struts Sqm 7.45 ₹ 814.66 ₹ 6,069.22

f 5.9.7 ₹ 764.95 stairs,( excluding landing except spiral-staircases) Sqm 6.07 ₹ 648.26 ₹ 3,934.95

g 5.9.15 ₹ 392.15 Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like. Sqm 35.00 ₹ 332.33 ₹ 11,631.57

h 5.9.19 ₹ 951.10 Weather shade, Chajjas, corbels etc., including edges Sqm 2.36 ₹ 806.02 ₹ 1,901.39

SECTION-III ( MASONRY WORK) ₹ 0.00

15 6.4.2 ₹ 9,105.95 Brick work with F.P.S. bricks of class designation 75, in superstructure above plinth level upto floor V level in all shapes and sizes in cement mortar 1:6 (1 cement: 6 coarse sand). Cum 27.65 ₹ 7,716.91 ₹ 213,357.04

16 6.13 Half brick masonry with common burnt clay ( non modular) bricks of class disignation 7.5 in superstructure above plinth level up to floor V level ₹ 0.00

6.13.2 ₹ 1,123.80 Cement mortar 1:4 ( 1 cement: 4 coarse sand) Sqm 14.88 ₹ 952.37 ₹ 14,171.31

SECTION-IV (FLOORING WORK) ₹ 0.00

17 11.26 Kota stone slab flooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1:4 ( 1 cement :4 coarse sand ): ₹ 0.00

18 11.4 ₹ 1,075.10 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix. 1:2 9 1 cement hardener mix:2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. Sqm 152.00 ₹ 911.10 ₹ 138,487.46

19 11.37 ₹ 1,096.55 Providing and laying ceramic glazed floor tiles 300x300 mm( thickness to be specified by the manufacturer )of 1st quality conforming to IS:15622 of approved make in colours such as white, ivory, grey, fume red brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement:4 Coarse sand )including pointing the joints in white cement mixed and matching pigment etc. complete. Sqm 20.00 ₹ 929.28 ₹ 18,585.59

20 8.31 ₹ 1,267.95 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 ( thickness to be specified by the manufacture) of approved make in all colours, shades except begundy, bottle green,blackof any size as approved by Engineer-in-chage in skirting, risers of steps and dados over 12mm thick bed of Cement Mortar 1:3 (1 Cement:3 Coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Sqm 48.00 ₹ 1,074.53 ₹ 51,577.63

21 11.6 Cement plaster skirting up to 30 cm height, with cement mortar 1:3 ( 1 cement : 3 coarse sand ) finished with a floating coat of neat cement ₹ 0.00

SECTION-V (PLASTERING WORK) ₹ 0.00

22 13.16 6mm cement plaster to ceiling of mix: ₹ 0.00

23 13.4 12mm cement plaster of mix: ₹ 0.00

24 13.6 20mm cement plaste of mix: ₹ 0.00

25 13.76 ₹ 100.60 Forming groove of uniform size from 12 x 12mm and upto 25 x 15mm in plastered surface as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repairs to the ecges of plaster panel and finishing the groove complete as per specifications and direction of the Engineer-in-charge. Metre 90.00 ₹ 85.25 ₹ 7,672.88

SECTION-VI (CARPENTARY, STEEL AND HARDWARE WORK) ₹ 0.00

26 9.21 Providing and fixing ISI marked flush door shutters non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: ₹ 0.00

9.21.1 ₹ 2,392.65 35 mm thick with necessary screws. Sqm 20.00 ₹ 2,027.67 ₹ 40,553.39

27 Providing and fixing ISI marked steel glazed doors, windows and ventilators of standard rolled steel sections, joints mitred and welded with 15x3mm lugs, 10 cm long, embedded in cement concrete blocks 15x10x10cm of 1:3:6 ( 1 cement:3coarse sand:6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of glass panes with glazing clips and special metal sash putty of approved make complete including applying a priming coat of approved steel primer, excluding the cost of metal beading and other fitting except necessary hinges or pivots as required as per drawing at all level. ₹ 0.00

Market Rate Annex-1 ₹ 5,270.58 Windows fixed / side hung / top hung KG 33.00 ₹ 4,466.59 ₹ 147,397.58

28 Market Rate Annex-1 ₹ 1,900.80 Extra for providing & fitting in windows 12mm dia M.S square bar grills @ 125mm c/c welded on the window frames including applying a priming coat of approved. Steel primer all complete as per approved drawing at all level. Sqm 33.00 ₹ 1,610.85 ₹ 53,157.97

29 10.14 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25 mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 25 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge. ₹ 0.00

10.14.1.1 ₹ 583.30 Profile B, Fixing with adjustable lugs with split end tail to each jamb metre 55.00 ₹ 494.32 ₹ 27,187.71

30 9.96 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade wth nuts and screws etc complete: ₹ 0.00

31 9.97 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete. ₹ 0.00

32 9.100 Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete. ₹ 0.00

33 9.101 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade with necessary screws etc. complete. ₹ 0.00

9.101.2 ₹ 62.25 Twin rubber stopper Each 5.00 ₹ 52.75 ₹ 263.77

34 9.66 Providing and fixing ISI marked oxidised M.S handles conforming to IS:4992 with necessary screws etc. complete. ₹ 0.00

35 9.68 Providing and fixing oxidised M.S casement stays (straight peg type) with necessary screws etc. complete. ₹ 0.00

9.68.1 ₹ 67.40 300 mm weighing not less than 200 gms Each 50.00 ₹ 57.12 ₹ 2,855.93

SECTION-VII (FINISHING WORK) ₹ 0.00

36 13.47 Finishing walls with premium Acrylic smooth exterior paint with silicone additives of required shade: ₹ 0.00

13.47.1 ₹ 171.10 New work (Two or more coats applied @ 1.43kg/10sqm) over and including base coat of waterproffing cement paint Snowcem Plus or equivalent applied @ 2.20 kg/10 sqm Sqm 442.00 ₹ 145.00 ₹ 64,090.00

37 13.41 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade ₹ 0.00

13.41.1 ₹ 185.65 New work (two or more coats) over and including priming coat with cement primer. Sqm 842.00 ₹ 157.33 ₹ 132,472.29

38 13.62 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: ₹ 0.00

13.62.1 ₹ 226.25 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved band and manufacure Sqm 161.00 ₹ 191.74 ₹ 30,869.70

SECTION-VIII (MISCELLANEOUS ITEMS) ₹ 0.00

39 22.7 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces / sunken slabs etc consisting of following operations. ₹ 0.00

a)Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with proprietary water proofing compound conforming to IS:2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height includingcleaning the surface before treatment. ₹ 0.00

b)Laying brick bats with mortar using broken bricks / brick bats 25mm to 115mm size with 50% of cement mortar 1:5 (1cement: 5 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 cement: 5 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge to requiredslope and treating similary the adjoining walls upto 300mm height including rounding of junctions to walls and slabs. ₹ 0.00

c)After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compoun conforming to IS: 2645.and approved by Engineer-in-charge. ₹ 0.00

d)Finishing the surface with 20mm thick jointless cement mortar of mix 1:4 (1 cement:4 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making of 300 x 300 mm square 3 mm deep. ₹ 0.00

e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Enigneer-in-charge. ₹ 0.00

22.7.1 ₹ 1,684.60 With average thickness of 120mm and minimum thickness at khurra as 65 mm for roof slab and for sunken slab average thickness of 80mm and minimum thickness of khurra as 65 mm Sqm 193.00 ₹ 1,427.63 ₹ 275,532.03

40 10.18 ₹ 220.65 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard rawing. Each 10.00 ₹ 186.99 ₹ 1,869.92

41 4.17 ₹ 749.30 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. Sqm 60.00 ₹ 635.00 ₹ 38,100.00

42 10.25 Steel work welded in built up sections/framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. ₹ 0.00

10.25.2 ₹ 172.60 In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works. Kgs 250.00 ₹ 146.27 ₹ 36,567.80

43 10.26 Providing and fixing hand rail by welding etc. to steel ladder railing, balcony railing & staircase railing including applying a priming coat of approved steel primer ₹ 0.00

10.26.1 ₹ 196.80 M.S tube (medium) 40 mm nominal bore Kgs 220.00 ₹ 166.78 ₹ 36,691.53

BOQ OF BALANCE WORK FOR 20 BEDED SECURITY GUARD RESIDENCE FOR GIS CHANDWA

PART-II(PHE WORKS)

S.N. DSR23 DSR Rate DESCRIPTION UNIT QTY RATE AMOUNT

SANITARY INSTALLATION

1 17.1 Providing and fixing water closet squatting pan (Indian type W.C pan) with 125 x 110 dia uPVC, 10 litre low level white P.V.C flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

17.1.1 ₹ 6,767.40 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests Each 3.00 ₹ 5,735.08 ₹ 17,205.25

2 17.7 Providing and fixing wash basin with C.I./ M.S brackets, 15mm C.P brass piller taps, 32mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. ₹ 0.00 ₹ 0.00

White Vitreous China ₹ 0.00 ₹ 0.00

17.7.4 ₹ 1,879.20 Flat back wash basin size 550x400mm with single 15mm C.P brass pillar tap Each 2.00 ₹ 1,592.54 ₹ 3,185.08

3 17.9 Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required. ₹ 0.00 ₹ 0.00

17.9.1 ₹ 3,892.75 White glazed fire clay kitchen sink of size 600 x450 x 250 mm Each 1.00 ₹ 3,298.94 ₹ 3,298.94

4 17.5 Providing and fixing white vitreous flat back half stall urinal of size 580 x380x 350 mm with PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe , spreaders with unions and clamps ( all in C.P. brass ) with waste fittings as per IS: 2556, PVC trap with uotlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors where ever required: ₹ 0.00 ₹ 0.00

17.5.1 ₹ 12,071.75 Single half stall urinal with 5 litres P.V.C. automatic flushing cistern. Each 2.00 ₹ 10,230.30 ₹ 20,460.59

5 Providing and fixing soil, waste and vent pipes: ₹ 0.00 ₹ 0.00

Market Rate Annex-1 ₹ 437.58 110 dia uPVC Metre 8.00 ₹ 370.83 ₹ 2,966.64

6 Providing and fixing single equal plain junction of rquired degree with access door, insertion rubber washer 3mm thick, boltsand nuts complete. ₹ 0.00 ₹ 0.00

Market Rate Annex-1 ₹ 343.80 110 dia uPVC Each 4.00 ₹ 291.36 ₹ 1,165.42

7 Providing and fixing terminal guard: ₹ 0.00 ₹ 0.00

Market Rate Annex-1 ₹ 128.00 110mm uPVC Each 4.00 ₹ 108.47 ₹ 433.90

8 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors. ₹ 0.00 ₹ 0.00

Market Rate Annex-1 ₹ 513.00 110 mm inlet and 110 mm outlet - uPVC Each 7.00 ₹ 434.75 ₹ 3,043.22

9 Providing and fixing plain bend of required degree. ₹ 0.00 ₹ 0.00

Market Rate Annex-1 ₹ 205.20 110mm uPVC Each 16.00 ₹ 173.90 ₹ 2,782.37

WATER SUPPLY ₹ 0.00 ₹ 0.00

10 18.49 Providing and fixing C.P brass bib cock of approved quality conforming to IS:8931 ₹ 0.00 ₹ 0.00

11 18.53 Providing and fixing C.P brass angle valve for basin mixer and gyer points of approved quality conforming to IS: 8931 ₹ 0.00 ₹ 0.00

12 18.22 Providig and fixing C.P brass sower rose with 15 or 20mm inlet ₹ 0.00 ₹ 0.00

13 18.52 Providing and fixing C.P brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931 ₹ 0.00 ₹ 0.00

14 18.21 Providing and fixing uplasticised P.V.C connection pipe with brass unions. ₹ 0.00 ₹ 0.00

15 17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. ₹ 0.00 ₹ 0.00

17.28.2 Flexible pipe ₹ 0.00 ₹ 0.00

16 17.31 ₹ 1,607.95 Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P brass screws and washers complete. Each 2.00 ₹ 1,362.67 ₹ 2,725.34

17 17.33 ₹ 1,083.50 Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs etc., complete Each 2.00 ₹ 918.22 ₹ 1,836.44

18 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arangement of approved quality colour and make ₹ 0.00 ₹ 0.00

17.73.2 ₹ 708.95 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weiging not less than 190 gms. Each 2.00 ₹ 600.81 ₹ 1,201.61

19 18.10 Providing and fixing G.I pipes complete with G.I fittings and clamps, including and making good the wall etc. (internal work) ₹ 0.00 ₹ 0.00

Exposed on wall ₹ 0.00 ₹ 0.00

18.10.2 ₹ 437.30 20mm dia nominal bore Metre 10.00 ₹ 370.59 ₹ 3,705.93

20 18.11 Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall ₹ 0.00 ₹ 0.00

18.11.1 ₹ 580.45 15mm dia nominal bore Metre 10.00 ₹ 491.91 ₹ 4,919.07

21 18.38 Painting G.I pipes and fittings with synthetic enamel white paint over a ready mixed priming coat both of approved quality for new work. ₹ 0.00 ₹ 0.00

22 18.17 Providing and fixing gun metal gate valve with C.I wheel of approved quality (screwed end) ₹ 0.00 ₹ 0.00

23 18.51 Providing and fixing C.P brass long body Bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. ₹ 0.00 ₹ 0.00

24 18.48 ₹ 11.00 Providing and placing on terrace ( at all floor levels) polyethelene water storage tank, IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. per litre 1000.00 ₹ 9.32 ₹ 9,322.03

SEWERAGE ₹ 0.00 ₹ 0.00

25 19.6 Providing and laying non-pressure NP2 class light duty) R.C.C pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement: 2 fine sand) including testing of joints etc. complete. ₹ 0.00 ₹ 0.00

26 2.10 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m. ₹ 0.00 ₹ 0.00

2.10.1 All kinds of soil. ₹ 0.00 ₹ 0.00

2.10.1.2 ₹ 352.15 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. Metre 45.00 ₹ 298.43 ₹ 13,429.45

27 19.7 Constructing brick masonry manhole in cement mortar 1:4 (1 cement: 4 coarse sand) R.C.C top slab with 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix ( 1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3(1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4(1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design. ₹ 0.00 ₹ 0.00

(a) 19.7.1 Inside size 90x80 cm and 45 cm deep including C.I cover with frame (light duty) 455 x 610mm internal diamensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame of 15 kg) ₹ 0.00 ₹ 0.00

19.7.1.1 ₹ 12,770.55 With common burnt clay F.P.S (non modular) bricks of class designation 7.5 Each 6.00 ₹ 10,822.50 ₹ 64,935.00

(b) 19.7.2 Inside size 120 x 90 and 90cm deep including C.I cover with frame (medium duty) 500mm internal diameter, total weight of cover and frame to be not less than 116 kg(weight of cover 58 kg and weight of frame 58 kg.) ₹ 0.00 ₹ 0.00

19.7.2.1 ₹ 26,405.50 With common burnt clay F.P.S (non modular) bricks of class designation 7.5 Each 3.00 ₹ 22,377.54 ₹ 67,132.63

28 19.4 Providing and fixing square-mouth S.W gully trap class SP-1 complete with C.I grating brick masonry chamber with water tight C.I cover with frame of 300 x 300mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.7 kg as per standard design. ₹ 0.00 ₹ 0.00

19.4.3.1 ₹ 2,802.15 With common burnt clay F.P.S (non modular) bricks of class designation 7.5 Each 3.00 ₹ 2,374.70 ₹ 7,124.11

29 19.32 Making soak pit 2.5m diameter 3.0metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W drain pipe 100 mm diameter, 1.8m long complete as per standard design. ₹ 0.00 ₹ 0.00

19.32.1 ₹ 26,861.90 With common burnt clay F.P.S (non modular) bricks of class designation 7.5 Each 2.00 ₹ 22,764.32 ₹ 45,528.64

30 19.8 Extra for depth for manholes ₹ 0.00 ₹ 0.00

19.8.1.1 ₹ 8,825.40 With common burnt clay F.P.S (non modular) bricks of class designation 7.5 Metre 1.20 ₹ 7,479.15 ₹ 8,974.98

19.8.2.1 ₹ 10,585.50 With common burnt clay F.P.S (non modular) bricks of class designation 7.5 Metre 0.60 ₹ 8,970.76 ₹ 5,382.46

MISCELLANEOUS ITEMS ₹ 0.00 ₹ 0.00

31 12.41 Providing and fixing on wall face unplasticised- Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. ₹ 0.00 ₹ 0.00

Single socketed pipes ₹ 0.00 ₹ 0.00

32 12.42 Providing and fixing on wall face unplasticised -PVC moulded fittings/accessories for unplasticised -Riging PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. ₹ 0.00 ₹ 0.00

33 12.42 Providing and fixing on wall face unplasticised -PVC moulded fittings/accessories for unplasticised -Riging PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. ₹ 0.00 ₹ 0.00

34 12.43 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50 x 50 x 50mm hard wood plugs, screwed with M.s screws of required length including cutting brick work and fixing in cement mortar 1;4 (1 cement: 4 coarse sand) and making good the wall etc. complete. ₹ 0.00 ₹ 0.00

BOQ FOR 20 BEDED SECURITY GUARD RESIDENCE FOR POWERGRID, CHANDWA S/S

PART-III( ELECTRIFICATION WORKS)

S.N. DSR 22 DSR Rate DESCRIPTION UNIT QTY POST GST RATE = RateX100/112 AMOUNT

1 1.10.3 ₹ 990.00 Wiring for Light point/ Fan point/ Exhaust Fan point/ Call Bell point with1.5 sq.mm FR PVC insulated Copper Conductor Cable in surface/ recessed PVC Conduit with modular type switch, modular plate, suitable size PVC/G.I. box etc. as required.(Group-C) Point 43.00 ₹ 883.93 ₹ 38,008.93

2 1.31 ₹ 401.00 Supplying and fixing suitable size GI/PVC box with modular plate and cover including providing and fixing 5 pin 5/6 Amp modular type socket on switch/separate board (in surface / recessed PVC conduit wiring system) and 5/6 Amp modular type switch Earthing the 3rd pin, painting etc. as required. Each 11.00 ₹ 358.04 ₹ 3,938.39

3 1.14.1 ₹ 146.00 Wiring for light plug and light circuit wiring with 2 x 1.5 sq.mm + 1.5 sq. mm. earth wire PVC insulated, copper conductor, single core cable in recessed / surface PVC conduit as required. Mtr. 114.00 ₹ 130.36 ₹ 14,860.71

4 1.12 ₹ 200.00 Wiring for power plug point with 2 x 4 Sq.mm FR PVC insulated copper conductor single core Cable in recessed / surface PVC conduit along with 1 no. 4 sq. mm copper conductor wire for loop earthing as required. Mtr 55.00 ₹ 178.57 ₹ 9,821.43

5 1.32 ₹ 495.00 Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess, including with 6 pin 15/16 Amp modular socket out let and 15/16 Amp modular switch, connections, painting etc. as required. Each 4.00 ₹ 441.96 ₹ 1,767.86

6 Wrining for sub-main wiring with the following sizes PVC insulated copper conductor single core cable in surface/ recessed PVC conduit as required

TOTAL(I) ₹ 85,986.61

II. DISTRIBUTION BOARDS.

1 2.4.1 ₹ 3,068.00 Supplying & fixing 4 way (4 +12) three pole and neutral, sheet steel MCB distribution board 415 volts on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, hinged front acrylic cover for the MCB knobs, detachable gland plate, internconnections, phosphatised and powder painted earthing etc. as required.(without MCBs) Each 1.00 ₹ 2,739.29 ₹ 2,739.29

2 Supplying & fixing of following rating and poles, B&C series miniature circuit breaker in the existing MCB DB Complete with connection testing and commissioning etc. as required.

TOTAL (II) ₹ 5,357.14

III. ERECTION OF FIXTURE

1 1.34 ₹ 117.00 Supplying & fixing brass batten/angle holder including connection etc. as required. Each 3.00 ₹ 104.46 ₹ 313.39

2 1.35 ₹ 98.00 Erection of wall bracket, bulkhead/ ceiling fitting suitable for all sizes and shapes upto two GLS lamp complete with all accessories including connection etc.as required Each 9.00 ₹ 87.50 ₹ 787.50

3 1.41 ₹ 168.00 Installation testing commissioning of pre-wired, fluorescent fitting of all types complete with all accessories and tube etc. directly on ceiling / wall including connections with 1.5 sq.mm. PVC insulated copper conductor, single core cable etc. as required. Each 14.00 ₹ 150.00 ₹ 2,100.00

4 1.45&46 ₹ 203.00 Installation, testing and commissioning of ceiling fan/wall bracket fan and regulator including wiring the down rod of standard length (30 cm) with 1.5 sq.mm PVC insulated copper conductor, single core cable etc. as required. Each 12.00 ₹ 181.25 ₹ 2,175.00

5 1.50.1 ₹ 363.00 Installation of exhaust fan upto 450mm sweep in the exisiting opening, inlcuding making the opening / hole to suit the size of the above fan, making good, the damages, connections, testing, commissioning etc. as required. Each 4.00 ₹ 324.11 ₹ 1,296.43

6 1.51 ₹ 168.00 Extra for fixing the louvre / shutters complete with frame for exhaust fan of all sizes. Each 4.00 ₹ 150.00 ₹ 600.00

TOTAL (III) ₹ 7,272.32

IV. SUPPLY OF FIXTURES :

1 Market Rate Annex-2 ₹ 3,732.00 1200 mm sweep A.C. Ceiling Fan complete with double ball bearing Fan motor,blades,regulator canopies and standard down rod as reqd. Each 12.00 ₹ 3,732.00 ₹ 44,784.00

2 Market Rate Annex-2 ₹ 3,080.00 300 mm dia. 1400 RPM A.C. exhaust fan complete. Each 4.00 ₹ 3,080.00 ₹ 12,320.00

3 Market Rate Annex-2 ₹ 541.00 Supply & fixing bracket light suitable for 1 No. 18 Watts. G.L.S. lamps complete, glass shade etc. as per approved sample. Each 5.00 ₹ 541.00 ₹ 2,705.00

4 Market Rate Annex-2 ₹ 272.00 Supply of circular ceiling fitting complete with anodized aluminium base plate, glass dome etc. Each 4.00 ₹ 272.00 ₹ 1,088.00

5 Market Rate Annex-2 ₹ 692.64 Supplying & fixing powder coated strip/patty fitting complete with copper ballast, 1 x 4'-40 Watts fuorescent lamp etc. directly on ceiling/wall, including connection with 1.5 sq. mm.FR PVC insulated Copper Conductor Cable etc. as required. Each 14.00 ₹ 692.64 ₹ 9,696.96

TOTAL (IV) ₹ 70,593.96

BOQ FOR THE 20 BEDED SECURITY GUARD RESIDENCE FOR POWERGIRD CHANDWA ss

PART-IV(SEPTIK TANK)

S.N. DSR23 DSR Rate DESCRIPTION UNIT QTY RATE AMOUNT

(a) 2.8 Earth work in excavation in foundation trenches or drains (not exceding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil

(b) 2.27 ₹ 2,123.75 Supplying and filling in plinth with Local sand under floors including, watering, ramming consolidating and dressing complete. Cum 0.75 ₹ 1,799.79 ₹ 1,349.84

(c) 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-all work upto plinth level. ₹ 0.00 ₹ 0.00

4.1.5 ₹ 7,294.70 1:3:6 ( 1 Cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) Cum 0.40 ₹ 6,181.95 ₹ 2,472.78

(d) 5.1.3 ₹ 8,583.40 Providing and laying in position specifed grade of reinforced cement concrete excluding the cost of centering, shuttering, finnishing and reinforcement- All work upto plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Cum 2.60 ₹ 7,274.07 ₹ 18,912.58

(e) 6.1 Brick work with F.P.S bricks of class designation 75 in foundation and plinth in: ₹ 0.00 ₹ 0.00

6.1.1 ₹ 7,370.65 Cement mortar 1:4 ( 1 cement: 4 coarse sand) Cum 3.50 ₹ 6,246.31 ₹ 21,862.10

(f) 6.12. Half brick masonry with bricks of class designation 75 in foundations and plinth in: ₹ 0.00 ₹ 0.00

6.12.2 ₹ 905.05 Cement mortar 1:4 ( 1 cement: 4 coarse sand) Sqm. 2.40 ₹ 766.99 ₹ 1,840.78

(g) 13.6 20mm cement plaster finished with a floating coat of neat cement of mix; ₹ 0.00 ₹ 0.00

(h) 19.18 Supplying and fixing C.I cover without frame for manholes: ₹ 0.00 ₹ 0.00

19.18.2 ₹ 3,441.20 500 mm diameter C.I cover (medium duty) the weiht of he cover to be not less than 58 kg. Each 2.00 ₹ 2,916.27 ₹ 5,832.54

(i) 19.15 Providing M.S foot rests including fixing in manholes with 20 x 20 x 10 cm cement concrete blocks 1:3:6 ( 1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) as per standard design: ₹ 0.00 ₹ 0.00

(j) 19.34.2 ₹ 602.65 Providing and fixing S.W. intercepting trap in manhole with stiff mixture of cement mortar 1:1 ( 1 cement :1 fine sand ) including testing of joints etc. complete. 150 mm dia Each 2.00 ₹ 510.72 ₹ 1,021.44

(k) 5.22 Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete. ₹ 0.00 ₹ 0.00

5.22.1 ₹ 107.10 Mild steel and medium tensile steel bars Kg 140 ₹ 90.76 ₹ 12,706.78

(l) 5.9 Centring and shuttering including strutting, propping etc. and removal of form for: ₹ 0.00 ₹ 0.00

5.9.3 ₹ 927.25 Suspended floors, roofs, landings, balconies and access platform. Sqm. 7.00 ₹ 785.81 ₹ 5,500.64

(m) 5.9.1 ₹ 392.15 Foundations, footings, bases of columns etc. for mass concrete. SqM 2.00 ₹ 332.33 ₹ 664.66

(n) 5.9.6 ₹ 961.30 Columns, Pillars, Piers, Abutments, Posts and Struts Sq.M. 6.00 ₹ 814.66 ₹ 4,887.97

(o) 5.9.2 ₹ 842.50 walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. Sq.M. 1.00 ₹ 713.98 ₹ 713.98

(p) 18.12 Providing and fixing G.I vent pipes complete with G.I fittings, bend, collar, terminal guard etc. complete as per Engineer in charge. ₹ 0.00 ₹ 0.00

Schedule-I of Price Bid

Name of the bidder 0 To,

Address 0 Contracts and Materials Department

0 POWER GRID CORPORATION OF INDIA LIMITED

0 VIDYUT BOARD COLONY, SHASTRINAGAR, PATNA-23

TOTAL AMOUNT OF CIVIL WORKS(Rs) 2541681.70

TOTAL AMOUNT OF PHE WORKS(Rs) 401989.13

TOTAL AMOUNT OF ELECTRICAL WORKS(Rs) 169210.03

TOTAL AMOUNT OF SEPTIC TANK WORKS 96900.13

GRAND TOTAL AMOUNT(Rs)/(CIVIL WORK + ELECTRICAL WORK+PHE WORK+SEPTIC TANK WORKS ) (excluding GST) 3209780.99

Above (+)and below (-)(in %): To be quoted by bidder

Quoted Price 3209780.99

GST (in percentage )@ 0

Total amount including taxes 3209780.99

Note: If any part of price which required to be filled by bidder kept blank, the bid price shall be considered as inclusive and evaluation shall be done accordingly

Date 0 Printed name 0

Place 0 Designation 0

Balance work for construction of Security Barrack at 400 KV GIS Substation Chandwa under JIPP A1 Project

Name of the bidder 0 To,

Address 0 Contracts and Materials Department

0 POWER GRID CORPORATION OF INDIA LIMITED

0 VIDYUT BOARD COLONY, SHASTRINAGAR, PATNA-23

We declare that following are our Total Bid Prices in Rupees for the expenditure incurred for the entire scope of work as specified in the specifications and documents. We have indicated Total Estimated Cost as indicated in the "Bill of Quantity(BOQ) & Prices" covering entire scope of works enclosed herewith as Schedule-I.

I Total for Installation/Services as per Schedule-I 3,209,781

II Total GST on services/Installation as per Schedule-I 0.00

III Toal BID Price including all taxes 3209781

Date 0 Printed Name 0

Place 0 Designation 0