REPAIR/ REPLACEMENT OF DAY TO DAY/ ARMAAN COMPLAINTS AND WELCOME MAINT, PERIODICAL TILING AND ALLIED WORKS AND REPAIR/ CLEANING OF SEWAGE LINE, SEPTIC TANKS, MANHOLES, SOAKAGE WELL AND REPAIR TO BOUNDRY WALL, DRAIN, PATH/ HARDSTANDING ETC IN LEKHANAG

Amount

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical after fixing new chowkhats / frame to existing finish without any extra cost to Govt.), all as specified and directed

Taking down chowkat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each including cutting holes for taking out hold fasts, dismentaling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical after fixing new chowkhats / frame to existing finish without any extra cost) complete all as specified.

Taking down shutters of any description exceeding 1 square metre each and n. exc 2 Sqm complete all as specified.

Taking down and refixing shutters of any description exc 1.00 Sqm and n.exc 2.00 Sqm each in same opening, complete all as specified and directed

S&F 2nd class hard wood (sal/hollock), plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete including fixing only aluminium mongery such as tower bolt (one Nos each Shutter 150 mm long) ,handle,( 150 mm long 2Nos on eah doors ) hinges ( 100 mm long heavy duty MS ),aldrop bolt ( 01 Nos on each doors 300 mm long with hasp and staple complete aluminium) etc all as specified.

S&F 2nd class hard wood (sal/hollock), glazed and skelton shutters 35mm thick open rebated and prepared to receive glass, gauge,etc. (without sash bars), edges of framing palin, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I Section 8.24(a) supplied and fitted to chowkhats complete including fixing only iron mongery such as wer bolt (one Nos each Shutter 150 mm long) ,handle,( 150 mm long 2Nos on eah doors ) hinges ( 100 mm long heavy duty MS ),aldrop bolt ( 01 Nos on each doors 300 mm long with hasp and staple complete aluminium) etc all as specified.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube and fixed in opening as per specification and drawing on page No. 150 MES SSR-2004 Part II and complete all as specified.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tube for top & bottom rails. M.S. frame shall be covered with heat mouleded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixed in the frame at site as per specification clause No.8B.1 to 8B.10 and drawing on page No. 146 of MES SSR-2004 Part-II complete including fixing only iron mongery such as wer bolt (one Nos each Shutter 150 mm long) ,handle,( 150 mm long 2Nos on eah doors ) hinges ( 100 mm long heavy duty MS ),aldrop bolt ( 01 Nos on each doors 300 mm long with hasp and staple complete aluminium) etc all as specified.

S&F in repair mild steel cold rolled butt hinges medium weight 100 mm long, including fixing and welding to pressed steel/wooden door frame if required complete all as specified.

S&F 100mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, and directed by Engr-in-charge.

M&L for rolled mild steel work of angle iron as in frames of doors & Cup Board etc conforming to grade Fe 410-O or Fe-310-O complete all as specified.

S&F of stainless steel wire cloth cut to size, 0.36 mm nominal dia wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staple complete all as specified .

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel staple complete all as specified and directed by Engr-in-Charge.

S&F in repair MS helical door spring 150mm size incl roller and roller plate fixed to wooden or steel frames incl necessary welding etc complete all as specified

S&F in repair 18/19 mm thick prelaminated particle boards bothsides with decorative choice laminations, grade-2 quality, interior grade, commercial type, fixed with screws as in shelves and shutters of cup board exposed face fixed with 20x6mm thick teak wood beading complete all as specified.

S&F 100 mm long mild steel hasp and staple complete all as specified

S&F in repairs Chromium plate tubular towel rail, 20mm dia, D type, 60cm long between flanges . all as specified.

S&F in repair of 200 mm long mild steel barrel tower bolts, extruded section

S&F in repairs of 200 mm long aluminium anodised barrel tower bolts, extruded section

S&F of mild steel sliding door bolt plate type 250 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified .

S&F in repair mild steel sliding door bolt plate type 250 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified .

S&F of 150 mm long mild steel pressed steel handle, oval type, stove enameled black complete all as specified.

S&F in repair 150 mm long mild steel pressed steel handle, oval type, stove enameled black complete all as specified.

M&L for hacking out old broken glass panes (any thickness size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips complete all as specified.

S&F of 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane fixing in glass any height/ any stories without any financial effect complete all as specified and directed

Checking & attending to joinery (wooden/steel) iron/aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/nails, fixing glass panes, minor adjustment of joinery, door etc. including petty repairs material like screws/nails, plug etc. to make it functional complete all as specified and directed by Engineer-In-Charge. Note :- Cost of material like screwes,nails, hinges, oil putty, wooden/rubber beadings and peg stay etc are included in the Quaoted rate.

Checking & attending to water leakage from taps, flushing cisterns, wash hand basins and other sanitary fittings/fixtures and any obstruction to water supply, requiring plumber work and carryout minor repairs such as replacement of washers, chuck nuts, tightening of fittings of flushing cistern etc including petty materials like washers of all sizes, thread (shoot), M-seal, screws, nails and white cement to make water supply/plumbing lines functional and leak proof complete all as specified and directed by Engineer-In-Charge. Note :- Cost of material like screwes, washers, chuck nuts and plumbing materials such as M seal, white cement etc are included in the Quaoted rate.

S&F in repair vitreous China wash basin, white, flat back, size 550x400mm excluding tap, chain, plug but including for fixing of taps,waste fitting, brackets and cutting for and pinning in ends of brackets but fixed in repair complete all as specified.

S&F 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia PVC flushing pipe and 15mm dia 450mm long PVC connection with CP brass coupling nuts and PVC washer at both ends (fixed in repair), complete all as specified and directed by Engr-in-charge.

S&F in repair stainless steel grade 304 conduit pipe 25mm bore (Drapery rod) with a pair of stainless steel clamps to hold drapary rod and decorative attachment at both ends of drapary rod, fixed to opening of door/windows, with a pair of clamps and a pair of side ornamental attachments), complete all as specified and directed by Engr-in-Charge.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar including fixing cantilever brackets connecting union to pipe and 32mm dia GI pipe duly painted upto Nihani Trap or Floor trap complete as directed at site, overall size 915mmx460mm bowl size 410mm x 330mm x160mm. all as specified.

S&F in repair Sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes coupling , inlcuding bedding in cement mortar to dwarf wall or including fixing cantilever brackets, PVC waste pipe and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm , complete all as specified and directed by Engr-in-charge.

S&F in repair pillar taps , cast copper alloy, with capstan heads , chromium plated , screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm complete all as specified.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified.

S&Fin repair waste fittings brass chromium plated for glazed ware sink, basins,etc with long screwed shank and fly nuts,flenges end bedded in red lead cement and other end fixed 32mm dia complete all as specified

S&F in repir stainless steel grating doom 100/150mm dia with or without hole complate all specified and directed.

S&F in repair 32/40 mm dia and 750mm long PVC waste pipe for WHB/sink complete all as specified

Taking up or down steel tubing with connections for cleaning for refixing or removing to storeyard complete of bore 15mm complete all as specified .

M&L for replacement steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15 mm complete all as specified.

Fixing only Steel water tubing 15mm dia medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors all as specified.

S&F in repair plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.

S&F in repair bib Tap of PTMT any colour 15mm dia complete all as specified and directed by Engr-in-charge.

Cleaning and removing all scale and dirt etc from PVC tank from mouths of circulating pipes capacity exc 250 ltr & not exceeding 500 ltr complete all as specified and directed by Engr-in-Charge.

S&F in repairs Rotational moulded polyethylene water storage tank 500 Ltrs capacity, ISI marked (cylindrical vertical with closed top), double wall layer construction, hoisted and fixed in position complete all as specified in SSR Part-I, making connections incl 20mm bore ball valve brass with polyethylene float and fly nut and tank nipples incl dismantling existing water tank of any capacity and removing from site, complete all as specified.

Supply and fixing in repair ball valves of size 20mm bore dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as reqd at site complete all as specified and directed

Supply and fixing in repair ball valves of size 15 mm bore dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as reqd at site complete all as specified and directed

Supply and fixing in repair angle valves cast copper alloy 15 mm, chromimum plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions including necessary fitting as required at site complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm dia stop cock fancy type chromium plated.

S&F in repair bib tap 15mm bore fancy type chromium plated all as specified.

S&F in repair bib cock 15mm bore fancy type long body chromium plated in repair .

S&F in repair swivel shower of size 100mm brass chromium plated with CP arms for fixing to 15 mm pipe complete all as specified.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified.

M&L for 10 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified.

M&L rendering 15mm thick in CM 1:4 in any description of brick wall finished even & smooth without using extra cement,complete all as specified and directed.

M&L for 5 mm thick rendering on fair faces of brick /concrete surfaces as in ceiling in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified.

Dismantling floor, hearth or wall tiling including CM bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-charge.

M&L for Glazed ceramic coloured tiles 300mm x 200mm x 7/450X250x7 mm thick as in vertical surfaces such as skirting dado etc set and jointed in neat cement slurry, pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified and directed by Engr-in-charge.

M&L for Non skid coloured 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 15mm thick screed bed in CM 1:6, complete all as specified and directed by Engr-in-Charge.complete all as specified and directed by Engr-in-Charge.

M&L Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble, complete all as specified and directed by Engr-in-charge.

M&L for applying two coat of synthetic enamel paint on new wooden surfaces including preparation of newly wooden surfaces over a coat of pink primer, complete all as specified.

M&L for applying two coat of oil bond distemper on walls after preparation of newly plastered surfaces over a coat of white primer, complete all as specified.

M&L for applying three coats of white washing on ceiling including preparation of newly plastered surfaces complete all as specified.

M&L preparation of surfaces on new walls appplying two coat of cement base paint over a coat of primer, complete all as specified and directed by Engineer-in-Charge.

M&L for applying two coat of painting on new steel surfaces including preparation of newly steel surfaces over a coat of red oxide primer, complete all as specified.

S&F in repair 1mm thick plate rack made of stainless steel, 600 x 750X250mm(Wt not less than 7.5 Kg) including brackets and embedded in brick wall all as specified and as per manufacturers instruction.

S&F in repair PVC tank cover suitable for tanks 500 & 1000 Ltrs tank incl securing with MS binding wires, complete all as specified and directed by Engr-in-Charge.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed by Engr-in -Charge

S&F Mild steel framed work such as grills, gratings with ends of bars shouldered or reveted or forged into spikes, framed guard bars, iron doors, ladders, framed balusters, walk ways railings, framework of watertanks and similar work, conforming to Fe-290, Gde E-165, complete all as specified and directed by Engr-in-charge.

M&L for old plastered surfaces applying Two or more coats of 100% Premium external weatherproof paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm. complete all as specified and directed.Make:-Apex Ultima protect/Berger paints(weather coat smooth)).

M&L for Rewriting or repainting of existing writing letters (Block or Indian) with synthetic enamel paint white with 150 mm hieght of letters over 30 mm dia of circle black syntheic eanemal paint all as specified and directed by Engr-in-Charge.

M&L for Preparation of old plastered/unplastered wall surfaces and applying one coat of oil bound distemper (including wahsing, rubbing down and stopping of distempered and painted surfaces), complete all as specifed.

M&L for Preparation of new plastered/unplastered wall surface and applying two coats of oil bound distemper over a coat of white primer and incl Complete removal of existing treatment complete all as specifed.

M&L for 1mm thick wall care putty of wall surfaces, complete all as specified.

M&L for prepration of old surfaces including cornices, pilasters etc(Plastered or unplasterd surfaces) and applying one coats of white (Lime) wash on ceiling complete all as specified.

M&L for prepration of old surfaces including cornices, pilasters etc(Plastered or unplasterd surfaces) and applying one coats of white (Lime) wash on wall complete all as specified.

M&L for prepration of old wooden surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified.(Note:-Using roller for painting and use scrapping machine for scrapping work)

M&L for prepration of old steel/iron surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified.

M&L for cleaning the existing surfaces and removal of debris , loose particles , grass etc and existing water proofing roof treatment completely and repairing the cleaned surfaces through repair mortar and providing chemical injection grouting and angle filets ( if required ) and treatment of pipe entry with hybird PU sealant dual shrinkage compensated micro conrete. Applying priming coat of epoxy primer with resin hardner in 1:1 ratio with water dilution as per manufacturerinstructions applying 2 coats of solvent based polyrethane liquid membrane not less than 500 micron thick UV having SRI valve greater than eual to 105 with consumption of 0.61 kg/sm ( each coat), 2nd coat shuld be applied once 1st coat becomes dry completely including 40mm thick (average thickness) PCC 1:2:4 type B-1(using 20 mm graded stone aggregates) as in padding on roof finished even and fair without using extra cement and all as specified and directed. (Make : Asian Paints /Thermax/Berger)

M&L for uprooting of plants (girth n.exc 15 cm of trunk to any type of plants 100 ml grown along the pipes or walls chajjas, parapets and roof of building at any height (incl multistoried) and making good the surface as per existing surface and pouring acid not less than 100 ml for each plant in the roof to avoid further growth complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) pipes in repair 110mm bore single socketed in any length with rubber ring jointed fixed to walls including Dismantling of 100/110mm dia of pipes PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches, if required all as specified and directed.

S&F PVC (SWR) pipes in repair 75mm bore single socketed in any length with rubber ring jointed fixed to walls including Dismantling of 75mm dia of pipes PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches, if required all as specified and directed.

S&F PVC (SWR) 110 mm bends any radius complete all as specified and directed.

S&F PVC (SWR) 75 mm bends any radius complete all as specified and directed.

S&F PVC (SWR) 110 mm junction single (single T) equal or unequal, complete all as specified and directed.

S&F PVC (SWR) 75 mm junction single (single T) equal or unequal, complete all as specified and directed.

S&F in repair of PVC (SWR) floor trap, plain with grating including jointing with solvent cement, bore of pipe in 75mm complete all as directed

S & F in repair stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays , including bolts and nuts and securing ends of stays to wall for fixing of pipe etc complete all as specified.

S&F in repair Vitreous china, white, Squatting pan ,'Orrisa' pattern size 580x440mm with integral footrests water closet) , front or back inlet and incl PVC P and S trap, connection to drain pipe and to flushing pipe, including making good to floor to match with the exisitng all as specified.

S &F in repair Vitreous China white wash down water closet ( padestal pattern) , including fixing bolts, plastic closet seat, black, closed pattern with recessed bottom and cover, including connection to drain pipe, flushing pipe. etc complete all as specified.

Dewateing of soakage well or septic tanks/ manhols and sewage line by arranging mechanical sewage machine (sucking machine capacity 8000 ltr in each trip) of any size & capacity including removing the blockage of sewage line through mechanical/hydraulic pressure and removing waste material, sludge etc from out side the MOD land and dispose off at appropriate place all as directed.

Cleaning the blockage of P trap/S Trap of WC , gully trap, floor traps, Nahani trap completely enable the sewage to flow freely to 1st manholes, by taking off the grating for removal of sludge and burrying in the ground etc. and resetting the grating after cleaning and removing the sludge and other materials from the manholes/FT/NT and GT by suitable means and removing all the materials obtained from the manholes outside MD land and clearing the complete area including making good any damages to the line or manhols complete all as specified and directed.

Cleaning surfaces of existing septic tanks, soackage well, drain alongwith roads comprising of clearing away of vegitation, grass, bushes, shurbs under growth roots trees n. exc 30cm grith(grith measures at 1m height above ground level) loosing including necessary excavation and getting out soil, silt deposits of any depth width and type, taking out from the drain boulders, stone of any size and shape in any position and including making good the demage portion of the concrete where reqd with PCC 1:1/2:3 type A-1 and removing of debris, rubbish of material so obtained from cleaning process out side of MOD Land.

Desludging of septic tank of any size & capacity including inlet and outlet chamber, removing the waste material, sludge etc to out side the MOD land and burying in pits complete all as specified and directed. Note : i) Unit rate quoted shall include the cost of digging out pits, burying the waste material, sludge etc in pit and covering the same with earth. ii) Qty of sludge only shall be measured and paid for after , dewatering of septic tank.

Cleaning of horizontal sewage line of any dia upto 150/200mm bore dia drain pipes by roding from manhole to manhole and well flushing with water after cleaning including cleaning of manholes by taking off manhole cover and placing in position the same after cleaning and removing the waste material . sludge etc from manholes, burying in pits out side the MOD land complete all as specified and as directed. NOTES:- i) Unit rate quoted shall include the cost of digging out pits burying the waste material, sludge etc in pit, and covering the same with earth. ( ii) For the purpose of making payments length of drain pipe from manhole to manhole shall be measured .

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified.

M&L cement concrete 75 mm thick type D2 1:4:8 ( using 40 mm graded stone aggregate ) as in sub base etcc, complete all as specified and directed.

M&L Coloured chequered tiles 300cmX300cmX25mm thick set jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 15 mm thick screed bed in cm 1:6 complete Mke : Tulip infrastruture saharanpur/redsons panipat, star tiles kanpur

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtrs deep and getting out in any type of soil for foundation of manholes etc complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers soil not exceeding 25 cm thick complete all as specified and directed.

Removing excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point, spreading and leveling complete all as specified and directed.

M&L for PCC 1:4:8,Type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed by Engineer -in-Charge.

Demolition and breaking up drain pipes (salt glazed stone ware) set in cement mortar in any dia including concrete bed & haunching where required and removing away as directed and specified.

M&L for 150 mm dia HDPE DWC sewage pipe stifness class SN4 or SN8 conferming to IS 16098:2013 jointed with coller laid complete including testing all as specified

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in bed of drain pipes 150mm bore, laid to falls including packing under and haunching against the sides of pipes after they are laid and tested as specified and directed.

M&L for 150mm bore salt glazed stone ware grade ‘A’ drain pipes, jointed on concrete bed complete including testing all as specified and directed by Engineer-in-Charge.

Cutting into existing manholes for connecting new drains, making good to pipes and rendering, cutting out existing benching for and forming branch channel (1/2 round to ¾ sections) in cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) smooth finished and reforming benching as required internal dia of pipe 150mm complete all as specified and directed.

Demolition of brick work or stone masonary built in cement mortar in any position or in any description including PCC Copings and removing away unserviceable material as directed and specified.

M&L brick work with sub class 'B' brick straight or curved on plan exc 6m mean radius build in CM 1:6,complete all as specified and directed.

Ditto as per srl item No.109 above but except brick.complete all as specified and directed.

M&L PCC 1:2:4 type B-1 as in copings including masonary form work complete all as specified and directed.

S&F factory made precast RCC manhole cover (medium duty) of size 1000mm x 500mm x 70mm thick conforming to IS 12592 with MS flat of 2mm thick on periphary of manhole cover complete incl demolition of old RCC work completed all as specified and directed.

VIRAT CONSTRUCTIONS (BID ID -3371845)

YADAV CONSTRUCTION COMPANY (BID ID -3375188)