PROVN OF 01 X GUARD ROOM WITH TOILET AND BATHROOM FACILITY AT HQ CENTRAL COMMAND, PROVN OF COVERED SHED AND GATE NEAR ADV HQ CAC AND OTHER SANCTIONED WORKS UNDER GE (EAST) LUCKNOW

Amount

Surface excavation not exc 30 cm deep averaging 15 cm deep and getting out in soft/ loose soil complete all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide & not exc. 1.5mtr depth for foundation, manholes etc and getting out soft/loose soil complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation or mass concrete etc complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6mtr mean radius, old size brick built in cement mortar 1:6 complete all as specified and directed.

M&L for brick work with fly ash bricks straight or curved on plan to any radius in a half brick thick wall in CM 1:4 complete all as specified and directed.

Returning filling including spreading levelling watering and well ramming in layers not exc 25cm in any soil complete all as specified and directed.

Removing excavated material not exc 50mtrs and depositing where directed at level not exc 1.5 mtrs above trhe starting point complete all as specified and directed.

Spreading, leveling and well ramming excavated soil incl. watering as reqd in layers not exc 25cm thick complete all as specified and directed.

M&L for A.T.T treating the soil under plinth protection at the rate of 5 litre of emulsion per square metre of surface area complete all as specified and directed.

M&L for A.T.T the back fill in contact with foundation at the rate of 7.50 litre of emulsion per square metre of vertical surface (area of sub structure in contact with back fill to be measured) complete all as specified and directed.

M&L for A.T.T the top surface of filled earth rate of 5 litre of emulsion per square metre of surface area complete all as specified and directed.

M&L for RCC M25 (20mm graded stone aggregate) design mix as in foundation, including raft footings, foundation beams, plinth beams bases for columns etc complete all as specified and directed.

M&L for RCC M25 (20mm graded stone aggregate) design mix as beams lintel, cantilever etc.complete all as specified and directed.

M&L for RCC M25 (20mm graded stone aggregate) design mix as roof slab.complete all as specified and directed.

M&L for RCC M25 (20mm graded stone aggregate) design mix as chajja.complete all as specified and directed.

M&L for RCC M25 (20mm graded stone aggregate) design mix as columns.complete all as specified and directed.

M&L for TMT 6mm to 8mm dia cut to length, bent to shape required incl. cranking, bending and incl. mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for TMT 10mm dia and over cut to length, bent to shape required incl. cranking, bending and incl. mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for TMT 6mm dia and over cut to length, bent to shape required incl. cranking, bending and incl. mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in stirrups etc complete all as specified and directed.

M&L for formwork to sides of footings of concrete foundation with rough finished surfaces of concrete complete all as specified and directed.

M&L for formwork to sides of columns with rough finished surfaces of concrete complete all as specified and directed.

M&L for formwork to sides and soffits of lintels & beams including supports overhangs etc with rough finished surfaces of concrete complete all as specified and directed.

M&L for fromwork to roof slab with projection including edges with rough finished surfaces of concrete complete all as specified and directed.

M&L for fromwork to chajjas, troughs and similar items including edges for rough finished surfaces of concrete complete all as specified and directed.

M&L for fromwork to edges of concrete flats, trads, break in floors window cills,concrete railings openings in concrete walls floors and roofs not exc 20cm wide and sides of RCC/Bands in walls horizontal and sloping and similar work exc 5cm but not exc 10cm wide complete all as specified and directed.

M&L for 15mm thick rendering in (CM) 1:4 mixed with WPC (as per manufacture instruction) on fair surfaces of brick walls finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in cm 1:6 on other than fair surfaces of brick walls finished even and smooth w/o using extra cement acomplete all as specified and directed.

M&L for 10mm thick rendering on fair faces of concrete surfaces in cement mortar 1:4, mixed with water proofing compound finished even and smooth without using extra cement complete all as specified and directed.

M&L for 5 mm thick plaster in CM (1:3) finished even and smooth without using extra cement as in ceiling complete all as specified and directed.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc, complete all as specified and directed.

Supply only integral water proofing compound ISI marked complete all as specified and directed.

M&L preparation of new plaster surfaces of wall and applying two coats of oil bound distemper over and including one coat of wall care putty 3mm thick with alkali resistant primer on wall complete all as specified and directed.

M&L preparation of new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

M&L preparation of new plastered surfaces and applying three coats of white wash on wall complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D-2 (40mm graded stone aggregate) for sub base complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 of type B0 using 12.5mm graded stone aggregate as in base of floors, roof padding etc complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7to 8 mm thick (square/Rectanglar) area of each tiles exc .11 Sqm but not exc 0.18 Sqm in floor including screed bed 15mm thick or beding layer for laying floor finishes in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for coloured glazed ceramic tiles 600x300 x 7 mm or 450X350X7mm thick on vertical surfaces such as skirting/dado including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for 18 to 20 mm thk granite (of any type) slab of approved shade as in kitchen platform etc. bedded and jointed with grey cement slurry and pointed with white cement with admisture of pigment to match with shade of granite stone including cutting, grinding and polishing (mirror polish i.e full granite polish as per local trade pratice) over & including 25mm thick screed bed (bedding layer) in CM 1:4 complete all as specified and directed.

M&L for hardcore of broken bricks of gauge not exc 63 mm deposited sprayed levelled in layer not exc 15cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C2 (40mm graded stone aggr) as in plinth protection laid in alternate panels finished even and smooth without using extra cement complete all as specified and directed.

M&L for forming construction joints 30mm deep and 10mm wide filled with sealing compound grade 'A' complete all as specified and directed

S&F pressed steel frames of size 125X60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) for filling in door frames etc complete all as specified and directed.

S&F 30mm thick flush shutters solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.

S&F 35mm thick 2nd class hard wood glazed skelton shutters open rebated and prepaired to receive glass guage etc (w/O sash bars) edges of framing plain chambered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR part-I section-8 clause 8.24 (a) S&F to chowkhat complete all as specified and directed.

S&F plain, solid, straight chowkats and frames of second class hardwood, wrought, framed rebated on the solid rounded or chamfered, put together with glue, pinned at joints, complete all as specified & directed.

S&F factory made solid PVC door frames of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting frame made out of M.S tube for top and bottom rail M.S frame shall be covered with heat mould plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for style and plain colour PVC sheet for top rail lock and bottom rail on either side and as gap insert for top rail and bottom rail plain colour PVC sheet tape fixed in MS frame welded/sealed to the style and rail with suitable PVC sheet beading and jointing together with solvent cement etc all as specified and as directed. S&F in the frame at site as per specification & drawings complete all as specified and directed.

S&F stainless steel butt hinges of size 100mm medium weight steel ISI marked complete all as specified and directed.

S&F 200 mm long aluminium alloy, anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed.

S&F 300mm long mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12mm dia and including minimum of 6 bolts and nuts four on bolt plate and two on staple plate complete all as specified and directed.

S&F 150mm aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F 200mm aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and directed.

S&F mild steel helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.

S&F mild steel framed work such as grills grating etc with ends of bars sholdered and /or riveted into spikes framed guard bars/railing complete all as specified and directed.

S&F steel windows with side hung shutters incl projecting type hinges steel handle and steel peg stay complete without glazing bar dovetailed or welded complete all as specified and directed.

S&F steel windows with side hung shutters incl projecting type hinges steel handle and steel peg stay complete with glazing bar dovetailed or welded complete all as specified and directed.

S&F steel ventilators with top hung shutters incl hinges steel handle and steel peg stay complete with glazing sash dovetailed or welded complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality & glazing with oil putty in square area not exc 0.5 sqm in each pane complete all as specified and directed.

S&F 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in square area not exc 0.5 Sqm in each pane complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over and including one coat of pink primer surfaces complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for preparation of new plastered decorated surface of wall and applying two coats of weather proof exterior emulsion paint after filling of interstice of plastered surface with Birla wall care putty all as specified and directed. Make : Apex (Asian) / Weather coat (Berger)

S&F exterior tiles superior quality 25 mm thick of approved size/design/shade set & jointed in neat cement slurry & pointed in white or coloured cement to match as in floor including 20mm thick screed bed in CM 1:4 complete all as specified and directed. Make- Duracrete/pivot

S&F vitreous china squatting pan (Orissa pattern) water closet (white) of size 580X440mm with integral foot rests 'P' or 'S' trap including connection to trap and flushing pipe antisyphonge pipe etc including provision of PCC (1:5:10) type E2 in filling making good to floor complete all as specified and directed.

S&F PVC valve less syphonic action type flushing cistern 10Ltr capacity low level white with intel ball valve float and handle including brackets and flush pipe complete all as specified and directed.

S&F vitreous china wash hand basin white flat back of size 550mmX400mm with & including a pair of cast iron brakets embedded in PCC 1:3:6 type C1 blocks of size 10X7.5X15cm, 32mm dia PVC waste pipe and 32mm bore chromum plated brass waste fitting with long screwed shanks and fly nuts flange end bedded in red lead cement & other end fixed (excluding tap, waste chain & plug) complete all as specified and directed.

S&F 125mm dia PTMT grating with waste hole complete all as specified and directed..

S&F PVC connection of 15mm bore 450 long with brass coupling on both ends of superior quality complete all as specified and directed.

S&F long body 15mm bore bib tap cast copper alloy chromium plated fancy type with capstan head screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair CP angle valve for 15 mm bore pie with capstan head long screwed shank including CP cover plate fancy type complete all as specified and directed.

S&F long body 15mm bore fancy type pillar tap cast copper alloy with capstan heads chromium plated screwed down high pressure ,with or with out lettered "Hot&Cold" with long shank and fly nuts screwed for iron pipe complete all as specified and directed.

S&F for rotational moulded polyethylene water storage tank 1000Ltrs capacity (cylindrical vertical with closed) noticed and portion all as pacific SSR part-I including dismanting of water tanks complete all as specified and directed.

S&F 20mm ball valve high pressure of PTMT with apoxi coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F 20mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

S&F 25mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

S&F 40mm bore PVC low density (LDPE) pipe of pressure 6Kg/cm2 fixed to wall or laid in floor complete all as specified and directed.

S&F PVC floor trap of 75/ 110mm bore with grating including jointing to waste pipe, fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floor complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floor complete all as specified and directed.

S&F PVC (SWR) bends 110mm dia provided with access door complete all as specified and directed.

S&F PVC (SWR) bends 75mm dia provided with access door complete all as specified and directed.

S&F15 mm bore galvanized steel tubes, medium grade for water supply pipes etc, fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F 20 mm bore galvanized steel tubes, medium grade for water supply pipes etc, fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F 25 mm bore galvanized steel tubes, medium grade for water supply pipes etc, fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repair superior quality CP brass tubular towel rail 20mm dia, D type 60cm long between flanges complete all as specified and directed.

S&F in repair drapery rods, coloured, standard quality, PVC coated not less than 25mm dia with heads both ends and middle support rings etc complete all as specified and directed.

S&F aluminium peg set consisting of 4 pegs on aluminium flat of standard section complete all as specified and directed.

M&L for cleaning of all loose dirt and dust from roof surfaces and applying roof treatment as under:- (a) M&L 10mm thick lastering in CM 1:4 using 100% course sand on roof including WPC @ 3% by weight of cement.(b) Applying a coat of bitumen primer @ 0.50 ltrs/Sqm on prepared and allow to dry.( c) Applying one coat of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm.(d) Supplying and laying 3mm thick (Minimum) polymeric water proofing membrane weight not less than 3 Kg/Sqm.(e) Applying a tack coat of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm.(f) Binding with coarse sand dry @ 0.50 to 1.00 kg/Sqm dusted over bitumen.(g) Supplying and laying fly ash brick tiles 40mm thick laid over on including 15mm thick screed bed in CM (1:4) and jointing and pointing in CM 1:4 by mixing linsead oil @ 5% weight of cement and bedding layer using 100% coarse sand.

S&F 1st class hard wood (Teak wood) wrought timber scantling / boarding for Rifle Rack including making notch for butt of rifle and bracket for barrel of rifle of size as directed by Engineer- in- Charge including fixing in wall and floor complete all as specified and directed

S&F mild steel bolts nuts diameter of exc 10mm but not exc 15mm purpose made with hexagonal or square head one end and screwed the other or secured both end to be fitted with washers or one hexagonal or square nut exc 15cm but not exc 22.50 cm long complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 as in cills, steps seismic and other similar bands plinth courses string courses lacing courses parapets copings surface channels and drains benching of man holes laid to shape and the like including weathering slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for concrete bed to drain pipes (150mm internal dia of pipe) including packing under and hauching against the sidses of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 complete all as specified and directed.

M&L for 150mm internal dia of salt glazed stoneware drain pipes laid in and jointed complete all as specified and directed.

Construction of soakage well of size 1.8M dia X 3.00M deep, excavation in ordinary Soil, Foundation in PCC 1:3:6, wells of Honey combed and solid in M-25 Concrete, including intercepting chamber, screen chamber Brick work in CM, RCC cover slab in M-25/ RR masonry / Filling with brick bats, complete all as specified and directed as per drawing CELZ TD-576 Sheet No 1/2 & 2/2. Note:- Depth of soak well shall be the effective depth i.e, below invert level of sewage line at well.

Construction of septic tank for 25 users, excavation in ordinary soil, foundation In PCC 1:2:4, brick work in CM 1:4, RCC slab covers in M-25 including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc., complete all as specified and directed as per drawing No. CELZ TD-217 Sheet No 1/2 & 2/2. Note:- depth of septic tank shall be the effective depth i.e, below invert level of sewage line at well.

M&L for providing precast reinforced cement concrete type B-1 1:2:4 (20mm graded stone aggregate) for manhole cover etc. and similar articles with plain faces and set in cement mortar 1:4 complete with joints to match complete all as specified and directed.

M&L for moorum filling under floors or in foundations including watering and consolidation ramming complete all as specified and directed.

S&F vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts flushing cistern and flush pipe ). and trap including connection to drain (or out going pipe) and to flushing pipe anti sphonage pipe etc complete all as specified and directed.Make :Cera/Periware/Hindware

S&F in vitreous china bowl type urinal flat back, size of 465 x 355 x 265mm (minimum) white including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with & including 60 mm long brass screws, pointing around urinal back in cement, with & including PTMT grating and union for discharge pipe including waste pipe of polythelene of low or high density or PVC 32mm dia complete all as specified and directed.

Excavation in post holes (or similar holes) each n exc 0.50cum, getting out, returning, filling, in and ramming earth or broken rubble mixed with earth arouond in layers not exc. 25cm, watering and removing surplus soil to distance not exc 50 m and making good surface in soft/loose soil complete all as specified and directed.

M&L for PCC1:3:6 type C-2(40mm graded aggregate)as in posts holes etc complete all as specified and directed.

S&F mild steel section such as tubular trusses including special shaped washer etc. compete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade ST-240 complete all as specified and directed.

S&F of MS plate as rest plate of truss forming hole for anchor bolt without any arrangement.complete all as specified and directed.

S&F 10mm thick polycarbonate corrugated/plain sheeting with two corrugation side lap fixed with 'l' type or 'j' type or cranked hook bolts, including aluminium beading complete all as specified and directed.

S&F retro reflective sign board of size 0.75m X 6m, made of 2 mm thick aluminuim sheet face to be fully covered with high intensity grade rretro reflective sheeting confirming to ASTMD-4956 01 as per colour required and letters, symbosis shall be made of same Retro Reflective sheeting shall be duly processed on base aluminum substrate board to be supplied along with back supported steel tube alongwith fixing accessories complete all as specified and directed

M&L for 40mm thick PCC 1:2:4 type B-1,1:2:4(20mm graded stone aggregate) as in flooring complete all as specified and directed.

M&L for machine cut kota stone slab flooring in single piece 18-20mm thick over and including 15mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as directed and specified.

M&L for kota stone slab 18-20mm thick in riser of steps,skirting,dado and pillar etc laid over and including cement plaster 15mm thick in CM 1:4, jointed with grey cement slurry mixed with pigment to match the shade of the stone including rubbing and polishing complete all as directed and specified.

S& F of pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as directed and specified.

S& F of pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as directed and specified.

Taking down carefully by unscrewing from wall/ceiling light, fittings and fixtures such as ceiling roses, lamp holders, brackets, ceiling fittings, tube light fittings etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse) complete all as directed and specified.

M&L for one light/fan/exhaust fan point wiring controlled by one switch with PVC insulated unsheathed multi stranded copper conductor (FRLS) of size 1.5 Sqmm (for Phase colour code Red and for Neutral colour code Black) and one run of size 1.5 Sqmm PVC insulated unsheathed multi stranded copper conductor (FRLS) (as earth wire, colour code green) and connected to common earth dolly all as specified. , drawn through in and including concealed PVC Conduit medium grade, ISI marked not less than 19.5 mm / 20 mm dia (Make: Kalinga/Bajaj/Polypack/Seiko) along with conduit fixing accessories and with pressed steel terminal box for mounting of modular inner plates of thickness 1.6 mm with outer modular plates upto 12 modules (Make: Crabtree) for provision of modular switches/regulators as per SSR complete all as directed and specified. Make of wiring cable:- RR Kable/Anchor/Havells/Paragon /HPL/Plaza /Polycab. Note:- After rewiring cutting chasing portion should be matched with existing finishes of walls.

All as per item No 118 above but 5 Amp socket outlet, independent.

All as per item No 118 above but on the same board.

All as per item No 118 above but 2.5 sq mm wire for one 15 Amps socket outlet independent with continuous PVC insulated single core green colour copper earth wire of size 1.5 sq mm connected to common earth dolly.

S&F modular switch 1 way 6 amps 230 volts single pole one way complete all as specified and directed. Make - Crabtree or equivalent in Havells/Anchor/ Roma.

S&F socket outlet multipurpose 2-in-1, 5 pin 6 Amps, 230 Volts modular type complete all as specified and as directed. Make - Crabtree or equivalent in Havells/Anchor/ Roma.

S&F socket outlet multipurpose 2-in-1, 6 pin 6 /16 Amps, 230 Volts modular type complete all as specified and as directed. Make - Crabtree or equivalent in Havells/Anchor/ Roma.

S&F modular switch 1 way 16 amps 230 volts single pole one way complete all as specified and directed.Make - Crabtree or equivalent in Havells/Anchor/ Roma.

S&F modular metal flush box, including inner plate & white cover plate with frame, 2 modules complete all as specified and directed. Make - Crabtree or equivalent in Havells/Anchor/ Roma.

S&F modular metal flush box, including inner plate & white cover plate with frame, 3 modules complete all as specified and directed. Make - Crabtree or equivalent in Havells/Anchor/ Roma.

S&F modular metal flush box, including inner plate & white cover plate with frame, 12 modules complete all as specified and directed. Make - Crabtree or equivalent in Havells/Anchor/ Roma.

S&F modular metal flush box, including inner plate & white cover plate with frame, 4 modules complete all as specified and directed. Make - Crabtree or equivalent in Havells/Anchor/ Roma.

S&F switch piano flush type 5 Amp one way, single pole, 240 volts all as specified.

S&F socket outlet 5 Amp, 5 Pin, 240 volt, flush type, all as specified and directed.

S&F ceiling rose, 3 phase/PVC/polycarbonate, isolated body three terminals all as specified

S&F lamp holder bakelite with back plate suitable for batten fittings all as specified.

S&F in replacement of single side connection LED T8 tube light rod 20 Watt, 6500K of four feet long into and including LED tube light fixture of four feet long with T8 push fit type holders, connector block, end caps, etc including connecting up complete all as specified and directed. Make : Crompton, Cat No : DMLN1LT8-16& LT8-20-865-2 or equivalent in Havells, Cat No : GALBATTENT8UPT01X22WSSBS & PHOTONULTRA1213T8SSTL20WLED865SPC,philips cat no TMC 100 1xT LED /MAS LED tube 1200 mm 18 w 865 T8 I - 2100 Lumen

M&L for sub main wiring with PVC insulated unsheathed cable with copper conductor multi strand 2 single core 4 sq mm and one run of 4.0 sq mm PVC insulated green colour earth continuity wire drawn through in and including 25 mm dia PVC concealed conduit complete all as specified and directed.

S&F MCB DB SPN (double door) 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and directed.

S&F MCB DB SPN (double door) 4 ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and directed.

S&F MCB SPN, 40 to 63 Amps, 240 Volts , breaking capacity 10KA complete all as directed.

S&F MCB, single pole, 240 Volts, of capacity (6-32 Amps) as ordered breaking capacity 10 KA.

S&F exhaust fan of 300 mm sweep A/C single phase 230/240 volts with heavy duty fan motor, blade, brackets and ring including 300 mm sweep looures shutter fixing outside including grouting of bolts, fixing with nut and washers and connected to ceiling rose complete all as specified and directed. Make:-Havelles, Crompton, Usha.

Cutting walls any type, making holes for fixing of exhaust fan any size or sweep and making good surface with fine plasteringand finishing and colouring with existing colour matching complete all as specified and directed.

S&F telephone socket module type 110 volts for connection of telephone cable including terminal box and mounting frame complete all as specified and directed. Make - Crabtree or equivalent in Havells/Anchor/ Roma.

S&F MCB DB VTPN (double door) 4 Ways, 415 Volts including one MCCB ,125 amp 3-pole 415 volt fixed type with breaking capacity 16 KA and 12 nos MCBs (6-32 ) amp and bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and directed. Make-Hager Cat No-VYV06DM-P or equivalent of legrand as approved by GE.

S&F fans ceiling complete with electronic type regulator and accessories 230 volts 1200 mm sweep. BEE 5 star rated incuding all electrical connection with hook for the hanging of the ceiling fan complete all as specified and directed. Make-havells/CG/ Khaitan

S&F single pole and neutral sheet metal enclosure with two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.

S&F GI tubing light grade 40 mm dia or bore for cable protection complete all as specified and directed.

S&F concealed PVC Conduit medium grade, ISI marked not less than 25 mm dia (Make: AKG /Polycab/Cap/Seiko along with conduit fixing accessories complete all as specified and directed.

Supply ,laying ,testing cable XLPE insulated,screened,PVC bedded,galvanised steel strip or wire armoured ,electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 6.0 SQMM 2 core complete all as specified and directed.

S&F LED building security light 36W IP 65 including one number MS clamps made of 25x3 mm flat iron with bracket of GI pipe light grade 25 mm dia and length not less than 1.2 mtr end of GI pipe suitable for street light fitting, connecting with three core copper flexible wire 23/0.0076 complete. Make-Philips/CG/Bajaj.

S&F in replacment surface mounted LED downlighter suitable for 12 W LED 6000K with durable polycarbonate housing using Al. heat sink & high brightness LED, with diffuser for glare free light, with removable driver to be connecting with ceiling rose with 1.5 sqmm twin core copper cable complete all as specified and directed.

S&F in repair wall bracket lantern cast aluminium body finished with stove enameled with acrylic window cover metal synthetic glass colour bronze .cat part no- philips of 1 HM Muziris wal light 31425 dimension 150x115x227or equivalent in Bajaj/ Havells/ CG as approved by GE.

M/S Reliance Construction