RESURFACING OF ROAD AT CERTAIN LOCATION AT UDAIPUR MIL STN UNDER AGE (I) UDAIPUR

Amount

Scarifying or picking graveled, macadam or bituminous macadam surface in area not exceeding 400sqm, exceeding 50mm deep and not exceeding 100mm deep and removing where complete all as specified and directed by Engr-in-Charge.

M&L for Repair to potholes not exceeding 1.0sqm each, depth exceeding 30mm, including sweeping free from dust & mud or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by applying tack coat at 5.0kg per 10sqm. putting in premixed bituminous macadam, well rammed & sealed with binder 9.8kg per 10sqm, blinded with 0.09cum of stone chippings, 6.3mm size & again well rammed (including supply or premixed macadam, binder & chippings) complete all as specified and directed by Engr-in-Charge.

M&L for preparing of unsurfaced WBM surface by brushing with wire brushes for removing caked mud etc. and sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to removed all loose dirts and for applying evenly a priming/tack coat with VG-10 bituminous primer at 10 kg per 10 sqm using paving bitumen over WBM surface complete all as specified and directed by Engr-in-Charge.

Material & Labour for laying premixed bituminous macadam (using binder content not less than 4% by weight of total mix) laid / rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) using VG-40 paving bitumen, complete all as specified and directed by Engr-in-Charge. Note: No extra payment will be made if binder is more than 4%.

M&L for preparing of black top surface by brushing with wire brushes for removing caked mud etc. and sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to removed all loose dirts and for applying evenly a priming/tack coat with VG-10 bituminous primer @ 5 kg per 10 sqm using paving bitumen over black top surface complete all as specified and directed by Engr-in-Charge.

M&L for providing bituminous premix semi dense asphaltic concrete 40mm consolidated thickness using paving bitumen of VG-40 with 5.5% binder content by weight of total mix, rolled with 8 to 12 tonne power roller and compacted to required camber and gradient complete, complete all as specified and directed by Engr-in-Charge. Note:- VG-40 paving bitumen content beyond 5.5% if required on account of design mix shall not be paid and shall be deemed to be included in unit quoted rate.

Material & Labour for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like not exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed by Engr-in-Charge.

Supply & Fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No DA 972.0 fixed with and incl MS stud of suitable size as per manufacturer's instructions, complete all as specified and directed by Engr-in-Charge.

Supply & Fixing in repair solar cat eyes (studs) made of aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufacturer's instructions etc., complete all as specified and directed by Engr-in-Charge.

Supply & Fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65mm dia highly reflective reflectors made out of PMMA and mounted on 45/50mm dia mild steel pipe of 600mm height duly powder coated and thermoplastic elastomer 3 bands of green, red and yellow reflector radium tape of 25mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150 x 150 x 300mm) type B-1, complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs Polycarbonate Convex Mirrors (80 cm dia) Make 3M or equivalent make, polycarbonate body mounted on 16 gauge MS pipe of 75mm outer dia fixed 1.50 mtr above ground surface and 60cm below ground incl PCC foundation of size 30 x 30 x 60 cm with PCC 1:3:6 type C1, Bottom part of MS pipe welded with 5mm thick 125 mm x 125 mm MS plate for anchroage in PCC. MS pipe shall be painted stove enameled paint over a coat of red oxide, incl necessary earthwork excavation in any soil, removal and disposal of spoil complete all as specified and directed by Engr-in-Charge (Note - Convex mirror shall be as per sample held in AGE (I) office sample room and shall be got approved by AGE (I) before fabrication of items in bulk).

M&L Moorum filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed by Engr-in-Charge.

M/S HARIOM CONSTRUCTION COMPANY (BID ID -3323122)

shree nathji trading corporation (BID ID -3323207)

Aman Corporation (BID ID -3319247)

Punjab Traders (BID ID -3322621)