Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹53.5 LAccepted-AOC | ₹53.5 L | 1 | Accepted-AOC L1 |
| 2 | 2₹55.7 L+₹2.2 L (4.03%)Rejected-AOC | ₹55.7 L+₹2.2 L (4.03%) | 2 | Rejected-AOC L2 |
Tender Value
₹59.6 L
EMD Value
₹1.2 L
Closing Date
9 Jun 2026, 5:00 pmClosed
DSCO Bathinda
DSCO Bathinda.
Earthwork for excavation of trenches for laying of underground pipeline, lowering and jointing of Various diameter RCC pipes, fixing of air vent pipes, risers and civil work etc. of Distt Bathinda.
2026_DOA_168228_2
DSWC/BAT/2026-2027/01
Open Tender
Pipe Laying Works
Percentage
Different Villages in Bathinda
Please refer Tender documents.
3 documents required · 3 mandatory
₹2,500
Yes
₹1.2 L
Yes
14 Jul 2026
2 Jun 2026
10 Jun 2026
2 Jun 2026
9 Jun 2026
2 Jun 2026
Proof of Enlistment in Class I/A, II/B, III/C or IV/D with Department of Soil and Water Conservation, Punjab or Department of Water Resources, Punjab or in any other Govt Department in State/Country in appropriate Class with amounting to similar or more than DSWC enlistment limit.
Bank Solvency of 40% of amount of tendered work from scheduled bank. Minimum 20 % of the solvency amount should be available in the form of capital or liquid assets or availability of credit facilities.
List of Essential Machinery on ownership/lease basis
List of Essential Technical Staff
Requisite Bid Capacity
Email id of Bidder
Item of Work
Words
Earth work in Excavation in trenches not exceeding 2 m depth including dressing Bottom & sides of trenches, stacking the excavated Soil Clear from the edge of excavation & subsequent filling around layed pipes in 15 cm layer with compaction including disposal of all surplus soil as directed within a lead of 30 meters as per PWD specifications.
Lowering & Laying of 500mm R.C.C. Class Np-2 Pipes in to trenches for all depths and laying out the same to correct alignment, gradients level etc as per PWD specifications.
Recarriage of 500 mm dia RCC Pipes within 0.5 km to 1 km
Jointing of 500mm class NP-2 R.C.C pipes in trenches using collar joints jointed as per specifications including facing trowelling and finishing the joints at the angle of 45 degree with faces of collars keeping joints w.e.f till cured, testing the drain lines or leakage and making good all leakage and defects to the satisfaction site incharge as per PWD specifications including material like Cement, Sand etc.
Fixing of 500mm Risers & Alfa valves as per specifications including material like Cement, Sand, Bajri etc.
Fixing of 150mm Air vent Pipes as per specifications including material like Cement, Sand, Bajri etc.
End Clousers 500mm with C.C 1:2:4 as per specifications
Fixing of Gatevalve with Material
Cutting reinforcement, Concrete pipes, chipping & finishing the cut surface to a uniform the satisfaction of site incharge (500 mm) as per PWD specifications.
Cutting reinforcement, Concrete pipes, chipping & finishing the cut surface to a uniform the satisfaction of site incharge (150 mm) as per PWD specifications.
L & T joints
Fixing of sign Board 4'x3' (16 gauge iron sheet with angles)
Providing and Fixing of 1200 mm Pump Stand (S&S Pipe NP3 including Excavation,Material,Labour etc)
Item of Work
Words
Earth work in Excavation in trenches not exceeding 2 m depth including dressing Bottom & sides of trenches, stacking the excavated Soil Clear from the edge of excavation & subsequent filling around layed pipes in 15 cm layer with compaction including disposal of all surplus soil as directed within a lead of 30 meters as per PWD specifications.
Lowering & Laying of 350mm R.C.C. Class Np-2 Pipes in to trenches for all depths and laying out the same to correct alignment, gradients level etc as per PWD specifications.
Jointing of 350mm class NP-2 R.C.C pipes in trenches using collar joints jointed as per specifications including facing trowelling and finishing the joints at the angle of 45 degree with faces of collars keeping joints w.e.f till cured, testing the drain lines or leakage and making good all leakage and defects to the satisfaction site incharge as per PWD specifications including material like Cement, Sand etc.
Fixing of 350 mm Risers & Alfa valves as per specifications including material like Cement, Sand, Bajri etc.
Fixing of 150mm Air vent Pipes as per specifications including material like Cement, Sand, Bajri etc.
Earth work in Excavtion as per PWD specifications.
B.B.C 1:8:16 as per PWD specifications.
Reinforced Cement Concrete 1:2:4 as per PWD specifications
First Class burnt brick work laid in Cement sand mortar in 1:5 in foundation and plinth CSR 11.5 as per PWD specifications.
10 mm thick cement plaster work 1:3 CSR 15.5 as per PWD specifications.
Plain Cement Concrete 1:2:4 as per PWD specifications
Item of Work
Words
Earth work in Excavation in trenches not exceeding 2 m depth including dressing Bottom & sides of trenches, stacking the excavated Soil Clear from the edge of excavation & subsequent filling around layed pipes in 15 cm layer with compaction including disposal of all surplus soil as directed within a lead of 30 meters as per PWD specifications.
Lowering & Laying of 500mm R.C.C. Class Np-2 Pipes in to trenches for all depths and laying out the same to correct alignment, gradients level etc as per PWD specifications.
Jointing of 500mm class NP-2 R.C.C pipes in trenches using collar joints jointed as per specifications including facing trowelling and finishing the joints at the angle of 45 degree with faces of collars keeping joints w.e.f till cured, testing the drain lines or leakage and making good all leakage and defects to the satisfaction site incharge as per PWD specifications including material like Cement, Sand etc.
Fixing of 500mm Risers & Alfa valves as per specifications including material like Cement, Sand, Bajri etc.
Fixing of 150mm Air vent Pipes as per specifications including material like Cement, Sand, Bajri etc.
End Clousers 500mm with C.C 1:2:4 as per specifications
Cutting reinforcement, Concrete pipes, chipping & finishing the cut surface to a uniform the satisfaction of site incharge (500 mm) as per PWD specifications.
Cutting reinforcement, Concrete pipes, chipping & finishing the cut surface to a uniform the satisfaction of site incharge (150 mm) as per PWD specifications.
L & T joints
Earth work in Excavtion as per PWD specifications.
B.B.C 1:4:8 as per PWD specifications.
Plain Cement Concrete 1:2:4 in flooring as per PWD specifications.
Reinforced Cement Concrete 1:2:4 as per PWD specifications
First Class burnt brick work laid in Cement sand mortar in 1:5 in foundation and plinth CSR 11.5 as per PWD specifications.
Fixing of Steps in Houdi
10 mm thick cement plaster work 1:3 CSR 15.5 as per PWD specifications.
Item of Work
Words
Earth work in Excavation in trenches not exceeding 2 m depth including dressing Bottom & sides of trenches, stacking the excavated Soil Clear from the edge of excavation & subsequent filling around layed pipes in 15 cm layer with compaction including disposal of all surplus soil as directed within a lead of 30 meters as per PWD specifications.
Lowering & Laying of 350mm R.C.C. Class Np-2 Pipes in to trenches for all depths and laying out the same to correct alignment, gradients level etc as per PWD specifications.
Jointing of 350mm class NP-2 R.C.C pipes in trenches using collar joints jointed as per specifications including facing trowelling and finishing the joints at the angle of 45 degree with faces of collars keeping joints w.e.f till cured, testing the drain lines or leakage and making good all leakage and defects to the satisfaction site incharge as per PWD specifications including material like Cement, Sand etc.
Fixing of 350mm Risers & Alfa valves as per specifications including material like Cement, Sand, Bajri etc.
Fixing of 150mm Air vent Pipes as per specifications including material like Cement, Sand, Bajri etc.
End Clousers 350mm with C.C 1:2:4 as per specifications
Fixing of Gatevalve with Material
Cutting reinforcement, Concrete pipes, chipping & finishing the cut surface to a uniform the satisfaction of site incharge (350 mm) as per PWD specifications.
Cutting reinforcement, Concrete pipes, chipping & finishing the cut surface to a uniform the satisfaction of site incharge (150 mm) as per PWD specifications.
L & T joints
Fixing of 4'x3' (16 gauge iron sheet with angles)
Fixing of 1000 mm Pump Stand (S&S Pipe NP3 including Excavation,Material,Labour etc)
Earth work in Excavtion as per PWD specifications.
B.B.C 1:4:8 as per PWD specifications.
Plain Cement Concrete 1:2:4 in flooring as per PWD specifications.
Reinforced Cement Concrete 1:2:4 as per PWD specifications
First Class burnt brick work laid in Cement sand mortar in 1:5 in foundation and plinth CSR 11.5 as per PWD specifications.
Fixing of Steps in Houdi
10 mm thick cement plaster work 1:3 CSR 15.5 as per PWD specifications.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.05 MB
techbidnew.xls
Tender Documents • 0.03 MB
finbidnew.xls
Additional Documents • 0.05 MB
DNITCombined.pdf
Additional Documents • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .