Loading
Loading…
Loading…
Tender Value
₹31.5 L
EMD Value
₹63,100
Closing Date
12 Mar 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
GSU
16 conditions · 1 needing a document upload
The tenderer should have a valid Electrical Contractor Licence from the concerned statutory authority. The above said Electrical Contractor Licence is to be submitted along with the offer otherwise the offer shall be summarily rejected. Compliance may be ensured for following.
Electrical Contractor License a.Work shall be carried out by contractor, having valid Electrical Contractor License for carrying out installation work under direct supervision of persons holding valid certificates of competency issued by State Government.
b. Tenderer shall have a valid Electrical Contractor's License issued in name of firm by any State Government and shall furnish all particulars of the Electrical license held by him along with the tender documents
c.Successful tenderer shall furnish names and particulars of certificate of competency of supervisor and workmen to be engaged for carrying out this work.
d.By a Gazette notification, Govt. of India has appointed Chief Electrical Engineer, N. Rly to be the Electrical Inspector and has directed that he shall exercise powers and perform functions of an Electrical Inspector under the Indian Electricity Act 2003 and Indian Electricity Rules 1956
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
30 conditions · 5 needing a document upload
Annexure-21 for Bid Security (in terms of Clause 1.1.7 of tender document): Tenderer (s) may please note that offers received without Bid Security either in cash through e-payment gateway or as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents (as per Annexure- 21) valid for a period of 90 days beyond the bid validity period, will be considered as incomplete & invalid offer and for which contractor shall have no claim on Railway.
In case, submission of Bid Security in the form of Bank Guarantee, following shall be ensured: (i) A scanned copy of the Bank Guarantee shall be uploaded on e-Procurement Portal (IREPS) while applying to the tender. (ii)The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bids (i.e. excluding the last date of submission of bids). (iii) Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. (iv).The Tender Security shall remain valid for a period of 90 days beyond the validity period for the Tender. (v)The details of the BG, physically submitted should match with the details available in the scanned copy and the data entered during bid submission time, failing which the bid will be rejected. (vi).The Bank Guarantee shall be placed in an envelope, which shall be sealed. The envelope shall clearly bear the identification "Bid for the ***** Project" and shall clearly indicate the name and address of the Bidder. In addition, the Bid Due Date should be indicated on the right hand top corner of the envelope. (vii)The envelope shall be addressed to the officer and address as mentioned in the tender document. (viii)If the envelope is not sealed and marked as instructed above, the Authority assumes no responsibility for the misplacement or premature opening of the contents of the Bid submitted and consequent losses, if any, suffered by the Bidder.
1. Only firm recognized by department of industrial policy and promotion (DIPP) as "Startups" shall be exempted from payment 1.1.1 of Bid Security as per GCC 2022. 2. All other firms except described above shall be required to submit the Bid Security as per terms and conditions of tender.
PAN CERTIFICATE : PAN The tenderer shall submit the photocopy of Permanent Account Number (PAN) issued by Income Tax authority attested by Gazetted officer / self attested.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
GSTIN number: Bidder shall submit attested or self attested copy of GSTIN certificate.
Following documents shall be submitted by the tenderer: (A)SOLE PROPRIETOR SHIP FIRM: (i)All other documents in terms of clause 1.1.12 of tender document . (B)HUF: (i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii)All other documents in terms of clause 1.1.12 of tender document. (C)PARTNERSHIP FIRM:(i)A notarised copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar. (ii)A notarised or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm.(iii)An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract.(iv)All other documents in terms of clause 1.1.12 of tender document . (D)JOINT VENTURE (JV): APPLICABLE ONLY FOR WORKS COSTING MORE THAN Rs.10.00 Cr. Not applicable for this tender. (E)Company registered under Companies Act- 2013:(i)The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company.(ii)A copy of Certificate of Incorporation.(iii)A copy of Authorization / Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company.(iv)All other documents in terms of clause 1.1.12 of tender document. (F)LLP (Limited Liability Partnership) Firm under LLP Act-2008: (i)A copy of LLP Agreement.(ii)A copy of Certificate of Incorporation.(iii)A copy of Power of Attorney / Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP.(iv)An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (G)Registered Society & Registered Trust: The tenderer shall submit: (i)A copy of the Certificate of Registration.(ii)A copy of Memorandum of Association of Society/Trust Deed.(iii)A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust.(iv)A copy of Rules & Regulations of the Society.(v)All other documents in terms of clause 1.1.12 of tender document .
The tenderer shall submit a copy of certificate (Annexure 19(A)) in case of other than Company/Proprietary firm by each member of a Partnership Firm / Joint Venture (JV) / Hindu Undivided Family (HUF / Limited Liability Partnership (LLP) etc, as the case may be. Non submission of above certificate(s) by the bidder shall result in summarily rejection of his/their bid. It shall be mandatory incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document. Note:- As per railway board letter No. 2022/CE-I/CT/GCC Correspondence Dated: 14.05.2024 "On IREPS Module, a facility has already been created for online submission of Annexure-V. Therefore, the provision of downloading of Annexure-V of GCC & uploading of physically signed Annexure-V by the tenderer had been discontinued on IREPS".
The tenderer shall study the Northern Railway General Conditions of Contract Regulations for Tenders & Contracts 2022 or latest along with tender documents before submission of the tender.
Applicable charges/recoveries/Advance etc. (Deployment ofTechnicaI supervisors per attached Annexure Xlll) is applicable.
There is an option of payment to contractor through a letter of credit (LC) arrangement (Authority Railway Board's letter no. 201 8/CE-l/CT/9 dated 04.06.2018)as given in clause i .3.14 of tender document.
GCC works 2022(or latest if any) should be the integral part of this tender.
Electrical works in c/w Upgradation/Improvement of DHANDARI KALAN Goods Shed.
27-Elect-GSU-T-04-2026-27~NR
27-Elect-GSU-T-04-2026-27
Open
Works - General
12 Months
Firozpur, Punjab
₹0
₹63,100
12 Mar 2026
18 Feb 2026
26 Feb 2026
55 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 31,54,998.32 | ||
| — | 6.00 | — | — | ||
| Supply of 180x100x60 mm deep M.S switch box conforming to IS 5133 ( Part - I ) - 1969(latest version) with white Phenolic laminated sheet cover of approved make on front of box with brass screws & cup washers, recessing as per Tech. Specification including earthing. | — | — | — | 427.92 | |
| — | 6.00 | — | — | ||
| Supply of 300x200x100 mm deep M.S switch box conforming to IS 5133 ( Part - I ) - 1969(latest version) with white Phenolic laminated sheet cover of approved make on front of box with brass screws & cup washers, recessing as per Tech. Specification including earthing. | — | — | — | 1,069.98 | |
| — | 5.00 | — | — | ||
| "Wiring for 5 pin 5 Amps plug points 5 Amps capacity with 2x1.5 sq.mm FRLS PVC insulated unsheathed multistranded copper conductor s/core cable in recessed PVC conduit pipe 25 mm dia including provision of 3 pin 5 Amps socket outlet with 5 Amps piano type switches and earthing of 3rd pin and MS box with 14 SWG GI wire as required at site." | — | — | — | 459.95 | |
| — | 5.00 | — | — | ||
| Wiring for 3 pin 15 Amps plug points 15 Amps capacity with 2x2.5 sq.mm FRLS PVC insulated unsheathed multistranded copper conductor s/core cable in recessed PVC conduit pipe 25 mm dia including provision of 3 pin 15 Amps socket outlet with 15 Amps piano type switches and earthing of 3rd pin and MS box with 14 SWG GI wire as required at site. | — | — | — | 832 | |
| — | 59.00 | — | — | ||
| Supply o f Piano Type switch 5 A (1-way) a s per I S 4949 - 1968(latest version) /Bell push a s p e r I S 4794 ( Part 2 ) - 1986(latest version)/flush type socket outlet a s p e r I S 1 2 9 3 - 1988(latest version) & installation on the recessed switch box including cutting of phenolic laminated sheet, connection, testing & commissioning as per Tech. Specifications. | — | — | — | 985.89 | |
| — | 4000.00 | — | — | ||
| "Wiring for light points with supply and laying o f FRLS PVC insulated multistranded copper conductor cable 1100 Volt 1x1.5 Sq.mm multi stranded confirming to IS-694 latest in the existing PVC pipe." | — | — | — | 49,000 | |
| — | 2000.00 | — | — | ||
| Supply, laying, fixing,testing and commissioning o f 2.5sq mm FRLS, PVC insulated multistranded copper conductor single core cable 1 1 0 0 Voltsconfirming t o IS-694(latest version),make Finolex,Havells, Polycab, KEI o r equivalent in the existing PVC conduit for wiring of point wiring/circuit wiring/sub main/main as perTech Spec-I attached, IS & IErules. | — | — | — | 37,880 | |
| — | 1000.00 | — | — | ||
| Supply, laying, fixing,testing a n d commissioning o f 4 s q mm FRLS, PVC insulated multistranded copper conductor single core cable 1 1 0 0 Voltsconfirming t o IS-694(latest version),make Finolex,Havells, Polycab, KEI o r equivalent in the existing PVC conduit for wiring of point wiring/circuit wiring/sub main/main as perTech Spec-I attached, IS & IErules. | — | — | — | 27,070 | |
| — | 1000.00 | — | — | ||
| Supply and recessing/fixing of 25mm (Medium) PVC conduit pipe conforming t o IS 9537/Pt.III/1983 o r Latest Version with accessories,junction b o x , e t c including m a k i n g chase, plastering/clamping etc as per technical specifications. | — | — | — | 37,660 | |
| — | 250.00 | — | — | ||
| Supply, fixing, testing and commissioning of LED light luminaries, having system wattage 1x > 18w (Max.), LED tube and inbuilt LED driver, CRCA body powder coated, complete with all mounting arrangement, accessories. The LED based 4 ft. tube light (lamp) shall be of make Phillips, Bajaj,Havells o r similar conforming to CEE/NR's spec. No. CEE/NR/121- Elect/PS/2018 (Rev- '3'), & PCEE/NR's spec. No. PCEE/NR/121- Elect/PS/2019 (Rev- '4') or latest | — | — | — | 1,48,445 | |
| — | 250.00 | — | — | ||
| Supply, fixing,testing a n d commissioning o f 3-pin ceiling rose 5 Amp capacity on existing MS/PVC conduit junction boxes/casing caping Anchor, Cona, Kinjal, SSK or equivalent as per IS, IE rules and site requirement. | — | — | — | 3,375 | |
| — | 10.00 | — | — | ||
| Supply, fixing, testingand commissioning o f super energy efficient BLDC electric ceiling fan of <=35W having BEE five star rating,1400mm sweep,230V AC 50 HZ,speed 320 RPM with tolerance limit plus minus to 10% as perIS-374-1979, power factor more than or equal to 0.94, class of insulation B, fan shall be surge immunity test passed for 2.5 kV EMI/EMC test high voltage protection beyond 275V,constant speed 140V t o 270V and low voltage start ability a t 80V. Make: Orient(model - ElectricEcotech Plus withremote) or equivalen tas per IS, IE rule &site requirement. | — | — | — | 27,900 | |
| — | 5.00 | — | — | ||
| Supply, fixing,testing and commissioning of 380mm sweep, 1400 rpm (approx) propeller type exhaust fan complete as per IS, IE rule & site requirement.Make Usha, Orient,Bajaj or equivalent | — | — | — | 15,645.35 | |
| — | 1.00 | — | — | ||
| "Supply, erection, testing a n d commissioning o f t h e following Double d o o r wall mounted Pre-fabricated L.T. Distribution Boards o f approved make, a s p e r explanatory n o t e & comprising; (i) Incoming MCCB 4Pole 63 A 35 KA B/C - 1 No. (ii). Outgoing MCB 6 to 32 A. SP 10 KA B/C (4 Nos. On each Phase) - 12 Nos." | — | — | — | 15,023.23 | |
| — | 1800.00 | — | — | ||
| Transportation, Laying, underground/road/Railway track, recessing in platform /wall along with Rly. Track/in laid RCC/GI pipe a s required 1 . 1 K V grade LT XLPE insulated armoured, aluminium conductor cable including making chase & plastering after laying of cable/digging of cable trench, sand cushioning, protective covering w ith second class bricks, provision o f cable route marker as per Tech. Specification including end terminations with Aluminium Clamping socket/lugs, testing and commissioning of Above 25 sq.mm | — | — | — | 1,04,274 | |
| — | 100.00 | — | — | ||
| "Excavation of cable trench by cutting/breaking station platform concrete/pucca floor digging 400 m m deep and then refilling after laying o f cable a s p e r I S 1255:1983 a n d technical specification enclosed on a cushion o f sand 100mm below and providing protective bricks as per drawing and soil and ramming, leveling and repairing and finishing the said portion of platform with 1:2:4 cement concrete mixture100 mm deep from top. I)Trench width 300mm wide for laying up to 3 cables with 9 protective bricks per meter." | — | — | — | 40,565 | |
| — | 100.00 | — | — | ||
| Laying of cable under ground through 160mm dia HDPE pipe by MicroTunneling cable laying method including supply and jointing of HDPE pipe. | — | — | — | 1,84,291 | |
| — | 600.00 | — | — | ||
| Supply & erection o f 103 m m Inner d i a Double Walled Corrugated pipe in ground under Railway track/road as required and as per explanatory note. | — | — | — | 2,04,630 | |
| — | 15.00 | — | — | ||
| Design, manufacturing of floor mounted MS feeder post made of MS sheet 1 6 SWG Die pressed of size 550mm x 450mm x 275mm deep complete with Aluminium bus bars four Nos. having cable glands 2 Nos. duly grouted with cement concrete ratio 1:2:4 duly earthed with earthing terminals. | — | — | — | 57,189.6 | |
| — | 18.00 | — | — | ||
| Earthing arrangement by providing earth electrode of GI pipe 50 mm dia (B class) 4.5 meter long with flange including 6 SWG GI earth wire from earth pipe to connecting point on switch board to distribution board/pole etc. as per site requirement including masonry enclosure as per Tech specification at annexure 'A' relevant ISS & IE rules and site requirements. A suitable CI/MS/RCC cover as approved by Rly . Representative, cover with locking arrangement shall be provided. | — | — | — | 41,581.8 | |
| — | 100.00 | — | — | ||
| Supply & recessing/fixing on surface 6 SWG GI wire for loop earthing as required as mentioned in explanatory note. | — | — | — | 881 | |
| — | 150.00 | — | — | ||
| Supply, laying and connection with GI Strip G I 25x5 mm (galvanized) conforming to relevant IS and as per IS 3043/1987(or Latest Version) 300mm deep i n ground/recessing in flooras required. | — | — | — | 10,395 | |
| — | 5.00 | — | — | ||
| Supply, testing, commissioning of 16 meter high mast system suitable for 9Nos. LED flood light luminaries (Min.150 Watt) with the help o f suitable equipment including accessories control panel for high mast system. Each high mast shall also have one twin d o m e aviation obstruction light with 2 nos. L E D lamp equivalent t o BJAOL - 2 . Make BAJAJ, Osram, PHILIPS, GE. B10Note-Accessories includes 3 point suspension head frame, steel wire rope of suitable dia, double drum winch, galvanized lantern carriage & other arrangement for each high mast shall have one Fedder Pillar box as per specification. Control panel includes the control circuit for lowering/raising operation of mast integral detachable power tool with motor including torque limiter time switch and lighting final including lines required for switching.Design / casting o f shallow foundation o f mast /panel shall be with M-20 concrete. Considering safe soil bearing capacity at site as 10 T/sq mtrs at 2 mt. depths.Foundation both,nuts, washes, anchor plates, templates should be made of Spl. Steel. A n y alteration/modification s h a l l b e d o n e a s per site/tech. specification requirement t o the satisfaction of Rly.Representative at the cost of firm. The tower shall be as per Tech. Specification at Annexure , IS, IE rules and site requirement. | — | — | — | 12,32,937.5 | |
| — | 45.00 | — | — | ||
| Supply, installation,testing and commissioning of 150 Watt LED based flood light fitting, operating voltage single phase 230V AC, 50Hz complete w ith l e d lam p & a l l mounting arrangement, accessories & flexible copper wire for connetion a s per ISS/IR rules & a s per CEE/NR Specification N o . CEE/NR/121- Elect/PS/2018 (Rev.03) dated 28.06.2018 & CEE/NR/121- Elect/PS /2019 (Rev.4) dated 04.11.2019 respectively or latest | — | — | — | 6,19,545.6 | |
| — | 5.00 | — | — | ||
| "Design, manufacturing, supply, erection, testing and commissioning of astronomical timer switch along with TPN 63 Amps and associated accessories as per detail (a) Astronomical time switch model SEL-170 tiop of Indo Asian or equivalent MDS, Legrand, Siemens, L&T, ABB, AEG (b) 65 Amps TP contactor model No. LBF 650 A or equivalent of L&T, Siemens, ABB, AEG (c) TPN MCB 63 Amps (d) Accessories like wiring, locks, hinges, gaskets, nuts & bolts etc. (e) MS fabrication box 2 mm CRCA sheet size 17"x12"x6" powder coated to 50 micron thickness." | — | — | — | 96,128.9 | |
| — | 20.00 | — | — | ||
| Providing S H rail post 1.5/ 2 . 5 mtrs. Long f o r safety o f high mast. Work includes cutting of 50 or60 or 75 or 90 lbs capacity rails in pieces of desired length (1.5/2.5 mtrs.),digging of pit and erection of rail pole (Rails will be supplied by railway and is to be collected by contractor from concerned SSE). The rail pole shall be erected over a cement concrete bed (1:3:6) of 15cm thickness and back filling of pit with excavated earth soil. The depth ofthe pit shall be 0.5 mtrs.or as directed by Site Engineer. These rail poles should be grouted properly. | — | — | — | 21,804.6 | |
| — | 5.00 | — | — | ||
| "Cutting, dismantling & transportation of 30/24 meter fabricated tower.The tower will b e dismantled i n pieces and scrap would be transported to railway Store depot. The truck will be provided by railway but the labour will be provided by the firm for both loading & unloading ." | — | — | — | 1,75,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .