SEES/SHIMLA-300/2021-22

Amount

Supply Part

a) Galvanized Steel Sub Station Structure and Equipment Structure

b) Galvanized Nuts & Bolts

90kN Disc Insulator B&S type 430mm creepage (Anti Fog Type)

ACSR Zebra Conductor 54/7/3.18mm for 66kV Bus Bar and Jumpering

GSS Earth Wire 7/3.15MM for Screening

Copper Flat 50x6mm for neutral earthing

66kV Hardware Fittings for Zebra conductor

i) Single Bolted Type Tension Fitting

ii) C-Wedge Clamp for Zebra Conductor

iii) PT Clamp

iv) CT Clamp

v) Isolator Clamp

vi) LA Clamp

vii) CB Clamp

viii) Transformer HV Bushing Clamp

ix) Single Bolted Type suspension Assembly

x) Turn Buckle

xi) 22kV Transformer LV Bushing Clamp

1.1KV PVC, HR FRLS, Copper Control Cable Screened)

i) 4Cx6 Sq.mm

1.1KV PVC, HR FRLS, Copper Control Cable (Un-Screened)

i) 12Cx2.5 Sq.mm

ii)19Cx2.5 Sq.mm

iii) 4Cx6 Sq.mm

iv) 2Cx2.5 Sq.mm

GI Flat 50x6mm for Structure & Equipement Earthing

Copper Braided Copper Strip for earthing of equipments

Pipe type earthing electrode for equipment earthing as per IS Standards with Salt, sand and Charcoal. (Salt-122 Kg, Coke-125 Kg, Charcoal-25 Kg & Sand-84 Kg)

CT Junction Box with TB

PT Junction Box

66 kV BMK

Conduit Pipes 3" dia (L/S) for laying cables

Cable Trays

300mm Width

150mm Width

Fire Fighting Equipments

Fire Extinguisher AFFF-50 Ltr. Cartridge type

Fire Extinguisher 22.5kG CO2 Wheel type

Fire Extinguisher 50LWater mix type CAF

Fire Extinguisher 9LWater mix type CAF

Cable termination kits oudoor type for Single Core 630 Sq.mm cable for incomer bay

Cable terminationm kits indoor type for Single Core 630 Sq.mm cable for incomer bay

Cable Termination kits outdoor type for Single Core 400 Sq.mm cable for outgoing feeder

Cable Termination kits indoor type for Single Core 400 Sq.mm cable for outgoing feeder

19.8 kV Lightning arrestors

ERECTION PART

Erection of 66kV Equipments on 100x50mm Channel

Circuit breaker

Control & Relay Panel for transformer HV side

Isolator without Earth Blade

Multi Core Multi ratio Current Transformers

Lightening Arrestor

Laying of cables in trenches and their ternimation a/aw feruling, fixing of approproate lugs as per requirement, binding with perforated PVC tape in the panels, fixing of SS cable glands at the entry of cables in the panels and JBs, binding with cable ties along the length of cables, installation cable sealing arrangement etc. as per specifcations and direction of Engineer-in charge

1.1KV PVC, HR FRLS, Copper Control Cable Screened)

4Cx6 Sq.mm

1.1KV PVC, HR FRLS, Copper Control Cable (Un-Screened)

12Cx2.5 Sq.mm

19Cx2.5 Sq.mm

4Cx6 Sq.mm

2Cx2.5 Sq.mm

a) Galvanized Steel Sub Station Structure and Equipment Structure with nuts & bolts

90kN Disc Insulator B&S type 430mm creepage (Anti Fog Type)

ACSR Zebra Conductor 54/7/3.18mm for 66kV Bus Bar and Jumpering

GSS Earth Wire 7/3.15MM for Screening

Copper Flat 50x6mm for neutral earthing

66kV & 22kV Hardware Fittings

GI Flat 50x6mm for Structure & Equipement Earthing

Copper Braided Copper Strip for earthing of equipments

Pipe type earthing electrode for equipment earthing as per IS Standards with Salt, sand and Charcoal. (Salt-122 Kg, Coke-125 Kg, Charcoal-25 Kg & Sand-84 Kg)

CT Junction Box with TB

PT Junction Box

66 kV BMK

Conduit Pipes 3" dia (L/S) for laying cables

Cable Trays

300mm Width

150mm Width

Fire Fighting Equipments

Cable termination kits oudoor type for Single Core 630 Sq.mm cable for incomer bay

Cable terminationm kits indoor type for Single Core 630 Sq.mm cable for incomer bay

Cable Termination kits outdoor type for Single Core 400 Sq.mm cable for outgoing feeder

Cable Termination kits indoor type for Single Core 400 Sq.mm cable for outgoing feeder

Erection of 66/22kV, 10 MVA power transformer and accessories including RTCC paneel and oil filteration upto the achievement of suitable BDV &IR values along with filling of oil-comple in all respects & as per direction of Engineer-in-charge

Laying of power cables

19.8kV Lightning Arrestor

Manufacturing & erection of cable supporting structures and erection of 50x6 copper flat from LV bushings to 19.8 kV LA

Installation & Commissioning of 22kV Panels including grouting with fasner

Krishna Construction & Trading Company