ESTIMATE FOR REPAIR OF UNDERGROUND DISTRIBUTION SYSTEM OF DISTRIBUTARIES OF GANGOWAL LIFT IRRIGATION SYSTEM OFFTAKING AT RD 88731 MTR OF KANDI CANAL STAGE 2

Amount

WATER SUPPLY Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect. Earth work upto 1.5 m. Depth for All classes of soil except rocky

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge). Class PN-1.6 as per ISI 200mm i/d Sluice Valves flanged

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge). Class PN-1.6 as per ISI 250mm i/d Sluice Valves flanged

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge). Class PN-1.6 as per ISI 300mm i/d Sluice Valves flanged

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge). Class PN-1.6 as per ISI 350mm i/d Sluice Valves flanged

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge). Class PN-1.6 as per ISI400mm i/d Sluice Valves flanged

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge). Class PN-1 as per ISI 200mm i/d Sluice Valves flanged

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge). Class PN-1 as per ISI 150mm i/d Sluice Valves flanged

Providing & fixing Single air valve ISI Marked as per IS-14845 including jointing , cost of nut bolts & rubber insertion all carriages complete. C.I Single air valve screwed (Size 50mm)

Providing & fixing double air valve ISI Marked as per IS-14845 including jointing all carriages complete.C.I Double air valve (Size 100mm)

Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department. Size 0.6 m. x 0.6 m.

Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department. Size 0.9 m. x 0.9 m.

Providing and filling sand grading as per specifications or fine grade around the various sizes of G.I. pipes in external work.

BRICK WORK First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth

PLASTERING & POINTING 12.5 mm thick cement plaster 1:4

CONCRETE Cement concrete 1:2:4 With stone ballast or shingle mixing by mechanical means using concrete mixer volumetric type

STEEL AND IRON WORK Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. 140mm dia 2.5 kg/cm²

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. 160mm dia 2.5 kg/cm²

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. 180mm dia 2.5 kg/cm²

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. 200mm dia 2.5 kg/cm²

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. 225mm dia 2.5 kg/cm²

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. 250mm dia 2.5 kg/cm²

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. 280mm dia 2.5 kg/cm²

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. 315mm dia 2.5 kg/cm²

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. 355mm dia 2.5 kg/cm²

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. 400mm dia 2.5 kg/cm²

Providing and fixing Elbow/Bends of 90° 6kg/cm² pressure as per IS 4985 including testing Commissioning and Complete in all respect to the specification of Engineer in Charge. 140mm dia

Providing and fixing Elbow/Bends of 90° 6kg/cm² pressure as per IS 4985 including testing Commissioning and Complete in all respect to the specification of Engineer in Charge. 160mm dia

Providing and fixing Elbow/Bends of 90° 6kg/cm² pressure as per IS 4985 including testing Commissioning and Complete in all respect to the specification of Engineer in Charge. 180mm dia

Providing and fixing Elbow/Bends of 90° 6kg/cm² pressure as per IS 4985 including testing Commissioning and Complete in all respect to the specification of Engineer in Charge. 200mm dia

Providing and fixing Elbow/Bends of 90° 6kg/cm² pressure as per IS 4985 including testing Commissioning and Complete in all respect to the specification of Engineer in Charge. 225mm dia

Providing and fixing Elbow/Bends of 90° 6kg/cm² pressure as per IS 4985 including testing Commissioning and Complete in all respect to the specification of Engineer in Charge. 250mm dia

Providing and fixing Elbow/Bends of 90° 6kg/cm² pressure as per IS 4985 including testing Commissioning and Complete in all respect to the specification of Engineer in Charge. 280mm dia

Providing and fixing Elbow/Bends of 90° 6kg/cm² pressure as per IS 4985 including testing Commissioning and Complete in all respect to the specification of Engineer in Charge. 315mm dia

Providing and fixing of Alfa valve of 140 mm dia complete including al tax and charges

Providing and fixing of Alfa valve of 160 mm dia complete including al tax and charges

Providing and fixing of Alfa valve of 180 mm dia complete including al tax and charges

Providing and fixing of Alfa valve of 200 mm dia complete including al tax and charges

Providing and fixing of Alfa valve of 225 mm dia complete including al tax and charges

Providing and fixing of Alfa valve of 250 mm dia complete including al tax and charges

Providing and fixing of Alfa valve of 280 mm dia complete including al tax and charges

Providing and fixing of Alfa valve of 315 mm dia complete including al tax and charges

Providing and fixing coupler of 6kg/cm² pressure as per IS 4985 including testing commissioning and Complete in all respect to the specification of Engineer in Charge. 140mm dia

Providing and fixing coupler of 6kg/cm² pressure as per IS 4985 including testing commissioning and Complete in all respect to the specification of Engineer in Charge. 160mm dia

Providing and fixing coupler of 6kg/cm² pressure as per IS 4985 including testing commissioning and Complete in all respect to the specification of Engineer in Charge. 180mm dia

Providing and fixing coupler of 6kg/cm² pressure as per IS 4985 including testing commissioning and Complete in all respect to the specification of Engineer in Charge. 200mm dia

Providing and fixing coupler of 6kg/cm² pressure as per IS 4985 including testing commissioning and Complete in all respect to the specification of Engineer in Charge. 250mm dia

Providing and fixing coupler of 6kg/cm² pressure as per IS 4985 including testing commissioning and Complete in all respect to the specification of Engineer in Charge. 315mm dia

Providing and fixing equal tee of 6kg/cm² pressure as per IS 4985 including testing commissioning and Complete in all respect to the specification of Engineer in Charge. 140mm dia

Providing and fixing equal tee of 6kg/cm² pressure as per IS 4985 including testing commissioning and Complete in all respect to the specification of Engineer in Charge. 160mm dia

Providing and fixing equal tee of 6kg/cm² pressure as per IS 4985 including testing commissioning and Complete in all respect to the specification of Engineer in Charge. 180mm dia

Providing and fixing equal tee of 6kg/cm² pressure as per IS 4985 including testing commissioning and Complete in all respect to the specification of Engineer in Charge. 200mm dia

Providing and fixing equal tee of 6kg/cm² pressure as per IS 4985 including testing commissioning and Complete in all respect to the specification of Engineer in Charge. 225mm dia

Providing and fixing equal tee of 6kg/cm² pressure as per IS 4985 including testing commissioning and Complete in all respect to the specification of Engineer in Charge. 250mm dia

Providing and fixing equal tee of 6kg/cm² pressure as per IS 4985 including testing commissioning and Complete in all respect to the specification of Engineer in Charge. 280mm dia

Providing and fixing equal tee of 6kg/cm² pressure as per IS 4985 including testing commissioning and Complete in all respect to the specification of Engineer in Charge. 315mm dia

Any Other Item (CSR + SP)

SEERAT CONSTRUCTIONS (BID ID -611685)