Loading…
Loading…
Tender Value
₹13.9 Cr
EMD Value
₹27.9 L
Closing Date
24 Aug 2026, 3:00 pm
Yes (up to 3 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
WORK1
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees, N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-C, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.(As per Railway Board letter no. 2022/CE-I/CT/GCC-2022/Policy, dated 14-07-2022)
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited : Three similar works costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works costing not less than the amount equal to 40% of advertised value of the tender, or One similar work costing not less than the amount equal to 60% of advertised value of the tender. [As per Annexure -B attached in tender document] (Full details para 10.1 in tender documents)
Defination of Similar Work :- Any Civil Engineering work (other than Track work).
42 conditions · 9 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please submit your bank details i.e. Name of the Bank along with Bank Branch Code, Account Number, IFSC Code, GST, PAN Number, Adhar Number, Mobile Number and e-mail address.
Please furnish list of personnel, organization available on hand and proposed to be engaged for the subject work. [As per Annexure -D attached in tender document]
Please furnish list of plant and Machinery available on hand own and proposed to be inducted own and hired to be given separately for the subject work.[As per Annexure - E attached in tender document]
Please furnish list of Works completed in last Seven years (Ending last day of month previous to the one in which tender is invited) giving Description of Work, Organization for whom executed, approximate value of contract at time of award, Date of award and Date of Completion. Date of actual Start, Actual Completion and Final value of Contract shall also be given. [As per Annexure F attached in tender document]
Please furnish list of Works on hand indicating Description of Work, Contract Value, Approximate value of balance work yet to be done and Date of award. [As per Annexure -G attached in tender document]
The tenderers shall submit a copy of certificate stating that all their statements/documents submitted along with bid are true and factual. Standard format of certificate to be submitted by the bidder is enclosed as Annexure-V(A). In case of other than Company/Proprietary firm, Annexure -V(A) shall also be submitted by the each member of a Partnership Firm/Joint Venture (JV)/Hindu Undivided Family (HUF/Limited Liability Partnership (LLP) etc, as the case may be. Non submission of above certificate by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he are/is qualifying the Qualifying Criteria mentioned in the Tender Document. [As per Annexure-V(A) attached in tender document].
Upload Scanned receipt copy of payment of Bid Security through net banking or payment gateway or in case of submission of Bid Security in the form of Bank Guarantee. Full details para 5.0 of GCC-April 2022.
At the time of submission of bid, if you have any special Condition then upload in scanned pdf copy.
Tenderer has to submit latest partnership deed with an affidavit that above partnership deed is correct in all respect and is latest [As per Annexure-L attached in tender document].
The Bid Security deposited with the tender of successful tenderer will be retained as part of security deposit which will be 5 percent of the value of work awarded. The balance amount of security deposit will recovered on account bills of the work @ 6 percent till it reaches up to 5 percent of the value including Bid Security.
The Railway Reserve the right to accept in whole or in part or reject any tender or all tenders without assigning any reason for such action. Rate should not be quoted for part quantity.
For those conditions for which standard formats have been given in the uploaded document titled-Formats for uploading of various format. The information's should only be submitted in these standard formats.
Rates are inclusive of all taxes/royalty charges etc. legally leviable by State, Central Govt. or any other local authority.
Goods and Services Tax (GST) will be recovered as per extant instruction on the subject.
Performance Guarantee :-(a)The successful bidder shall have to submit a Performance Guarantee (PG) within 21 (Twenty one) days from the date of issue of Letter of Acceptance (LOA). Extension of time for submission of PG beyond 21 (Twenty one) days and upto 60 days from the date of issue of LOA may be given by the Authority who is competent to sign the contract agreement. However, a penal interest of 12% per annum shall be charged for the delay beyond 21(Twenty one) days, i.e. from 22nd day after the date of issue of LOA. Further, if the 60th day happens to be a declared holiday in the concerned office of the Railway, submission of PG can be accepted on the next working day. In all other cases, if the Contractor fails to submit the requisite PG even after 60 days from the date of issue of LOA, the contract is liable to be terminated. In case contract is terminated railway shall be entitled to forfeit Bid Security and other dues payable to the contractor against that particular contract, subject to maximum of PG amount. In case a tenderer has not submitted Bid Security on the strength of their registration as a Startup recognized by Department of Industrial Policy and Promotion (DIPP) under Ministry of Commerce and Industry, DIPP shall be informed to this effect. The failed Contractor shall be debarred from participating in re-tender for that work.
(b)The successful bidder shall submit the Performance Guarantee (PG) in any of the following forms, amounting to 5% of the original contract value: (i)A deposit of Cash; (ii) Irrevocable Bank Guarantee; (iii) Government Securities including State Loan Bonds at 5% below the market value; (iv) Pay Orders and Demand Drafts tendered by any Scheduled Commercial Bank of India; (v)Guarantee Bonds executed or Deposits Receipts tendered by any Scheduled Commercial Bank of India; (vi) Deposit in the Post Office Saving Bank; (vii) Deposit in the National Savings Certificates; (viii)Twelve years National Defence Certificates; (ix) Ten years Defence Deposits; (x)National Defence Bonds and (xi) Unit Trust Certificates at 5% below market value or at the face value whichever is less. Also, FDR in favour of FA & CAO, NER (free from any encumbrance) may be accepted.
The tenderer shall upload scanned copies of mandatory credentials such as experience, Payment Certificates and any other documents as applicable.
Offer submission period :- Fifteen days prior to opening of tender, during which tenderers can submit their offer.
(a)One qualified Graduate Engineer where the cost of the work to be executed is Rs.200 lakh and above. (b)One qualified Diploma Holder Engineer where the cost of the work to be executed is more then Rs.25 lakh, but less then Rs.200 lakh. Technical staff should be available at site whenever required by the Engineer-in-charge to take instructions. In case the contractor fails to employ the qualified Engineer, he shall be liable to pay amount of Rs.40000 and Rs.25000 for each month or part thereof for the default period for the provisions, as contained in para (a) and (b) above respectively. The decision of the Engineer-in-charge as to the period for which the required technical staff was not employed by the contractor and as to the reasonableness of the amount to be deducted on this account shall be final and binding on the contractor.
Bank Guarantees BGs to be submitted by suppliers/contractors should be sent directly to the concerned authorities by issuing Bank under registered Post A.D
(1) Price Variation Clause (PVC) shall be applicable only in tender having advertised value above Rs. 2 Crores. The conditions will be follow with up-to-date correction slips (As per Railway Board letter no. 2022/CE-I/CT/GCC-2022/Policy, dated 14-07-2022). (2) Price Variation Clause for Annual Maintenance Contract or Zonal Contract :- The price variation Clause of General Conditions of Contract shall not apply to a works contract which is either an Annual Maintenance Contract or a Zonal Contract as per Railway Boards letter No.2013/CE/I/CT/O/10-PVC-Pt.I DT. 27.01.2015. (3) Price Variation Clause shall be applicable accordingly attached document.
(a)(i)Before submitting a tender, the tenderer will be deemed to have satisfied himself by actual inspection of the site and locality of the works, that all conditions liable to be encountered during the execution of the works are taken into account and that the rates he enters in the tender forms are adequate and all inclusive to accord with the provisions in Clause-37 of the Standard General Conditions of Contract for the completion of works to the entire satisfaction of the Engineer.
For all details of General Condition, Please See uploaded Tender Document and GCC-April-2022.
Care in Submission of Tenders :
(a)(i)Before submitting a tender, the tenderer will be deemed to have satisfied himself by actual inspection of the site and locality of the works, that all conditions liable to be encountered during the execution of the works are taken into account and that the rates he enters in the tender forms are adequate and all inclusive to accord with the provisions in Clause-37 of the Standard General Conditions of Contract for the completion of works to the entire satisfaction of the Engineer.
(a)(ii)Tenderers will examine the various provisions of The Central Goods and Services Tax Act, 2017(CGST)/ Integrated Goods and Services Tax Act, 2017(IGST)/ Union Territory Goods and Services Tax Act, 2017(UTGST)/ respective state's State Goods and Services Tax Act (SGST) also, as notified by Central/State Govt. & as amended from time to time and applicable taxes before bidding. Tenderers will ensure that full benefit of Input Tax Credit (ITC) likely to be availed by them is duly considered while quoting rates.
(a)(iii)The successful tenderer who is liable to be registered under CGST/IGST/UTGST/SGST Act shall submit GSTIN along with other details required under CGST/IGST/UTGST/SGST Act to railway immediately after the award of contract, without which no payment shall be released to the Contractor. The Contractor shall be responsible for deposition of applicable GST to the concerned authority.
(a)(iv)In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/ SGST Act, the railway shall deduct the applicable GST from his/their bills under reverse charge mechanism (RCM) and deposit the same to the concerned authority.
(b)When work is tendered for by a firm or company, the tender shall be signed by the individual legally authorized to enter into commitments on their behalf.
(c)The Railway will not be bound by any power of attorney granted by the tenderer or by changes in the composition of the firm made subsequent to the execution of the contract. It may, however, recognize such power of attorney and changes after obtaining proper legal advice, the cost of which will be chargeable to the Contractor.
For all details of General Condition, Please See uploaded Tender Document and GCC-April-2022.
1) Raising of platform up to High level at NSG-6 stations (CHRU and GUB). 2) Raising of ML to HL PF-1 at Aliganj station and RL to HL PF-2 at Aliganj station in jurisdiction of ADEN/KPV/IZN section of NE Railway.
NER-IZN-2026-132
NER-IZN-2026-132
Open
Works - General
12 Months
Gorakhpur, Uttar Pradesh
₹0
₹27.9 L
31 Jul 2026
31 Jul 2026
10 Aug 2026
128 items across 5 schedules · ₹13,93,63,594.58 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Beyond 5 km upto 10 km per km | cum- km | 39950 | 19.35 | 7,73,032.5 |
| 2 | All kinds of soil | cum | 1999.55 | 205.45 | 4,10,807.55 |
| 3 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. | cum | 7990 | 368.65 | 29,45,513.5 |
| 4 | All kinds of soil | cum | 507.14 | 104.5 | 52,996.13 |
| 5 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | cum | 1350 | 2,161.2 | 29,17,620 |
| 6 | All kinds of soil | Sqm | 13500 | 28.15 | 3,80,025 |
| 7 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. | Sqm | 13500 | 14.5 | 1,95,750 |
| 8 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 48.6 | 7,365.15 | 3,57,946.29 |
| 9 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 2156.4 | 6,833.4 | 1,47,35,543.76 |
| 10 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources: 6 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 65.91 | 6,670.25 | 4,39,636.18 |
| 11 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 60 | 9,375.2 | 5,62,512 |
| 12 | Foundations, footings, bases for columns | Sqm | 300 | 307.95 | 92,385 |
| 13 | Concrete of M20 grade with minimum cement content of 270 kg /cum | cum | 14.1 | 8,387.15 | 1,18,258.82 |
| 14 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone- III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 22 | 8,364.2 | 1,84,012.4 |
| 15 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 10 | 7,945.65 | 79,456.5 |
| 16 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 870 | 307.95 | 2,67,916.5 |
| 17 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 573.64 | 766.55 | 4,39,723.74 |
| 18 | Lintels, beams, plinth beams, girders, bressumers and cantilevers | Sqm | 20 | 608.35 | 12,167 |
| 19 | Stairs, (excluding landings) except spiral- staircases | Sqm | 347.8 | 657.75 | 2,28,765.45 |
| 20 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in mouldings as in cornices, windows sills etc, including setting in cement mortar 1:3 (1 cement : 3 coarse sand) cost of required centering, shuttering but, excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 23.5 | 15,777.4 | 3,70,768.9 |
| 21 | Providing and filling in position, blown bitumen in expansion joints. | cum | 5.62 | 63,877.35 | 3,58,990.71 |
| 22 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 77.73 | 8,683.8 | 6,74,991.77 |
| 23 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 43.99 | 10,306.2 | 4,53,369.74 |
| 24 | Concrete of M30 grade with minimum cement content of 350 kg /cum | cum | 30.64 | 10,477.75 | 3,21,038.26 |
| 25 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 141.53 | 6,658.25 | 9,42,342.12 |
| 26 | Cement Mortar 1:6 (1 cement : 6 coarse sand). | cum | .5 | 5,549.95 | 2,774.98 |
| 27 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 188.92 | 8,288.35 | 15,65,835.08 |
| 28 | Cement mortar 1:4 (1 cement :4 coarse sand) | Sqm | 26 | 1,018.05 | 26,469.3 |
| 29 | Area of slab over 0.50 sqm | Sqm | 300 | 4,425.35 | 13,27,605 |
| 30 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 39646 | 111.95 | 44,38,369.7 |
| 31 | Hot finished welded type tubes | Kg | 6912 | 154.9 | 10,70,668.8 |
| 32 | Electric resistance or induction butt welded tubes | Kg | 140 | 140.85 | 19,719 |
| 33 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. | Kg | 1200 | 88.5 | 1,06,200 |
| 34 | Providing and fixing bolts including nuts and washers complete. | Kg | 300 | 140.15 | 42,045 |
| 35 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | Kg | 5880 | 612.25 | 36,00,030 |
| 36 | Ordinary cement without any pigment | Sqm | 941.49 | 928.5 | 8,74,173.47 |
| 37 | 25 mm thick | Sqm | 223.14 | 1,706.6 | 3,80,810.72 |
| 38 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. | Sqm | 144.62 | 2,038.55 | 2,94,815.1 |
| 39 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. | Sqm | 100 | 1,225.1 | 1,22,510 |
| 40 | Size of Tile 600x600 mm | Sqm | 28 | 1,416.65 | 39,666.2 |
| 41 | Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. | Sqm | 253.6 | 2,589.9 | 6,56,798.64 |
| 42 | Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent | Sqm | 870.4 | 3,908.8 | 34,02,219.52 |
| 43 | Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red | Sqm | 60 | 2,677.9 | 1,60,674 |
| 44 | 100 mm diameter | Each | 88 | 308.45 | 27,143.6 |
| 45 | 110 mm diameter | Metre | 1115.7 | 319.75 | 3,56,745.08 |
| 46 | 1:6 (1 cement: 6 coarse sand) | Sqm | 155.82 | 294.35 | 45,865.62 |
| 47 | 1:6 (1 cement: 6 coarse sand) | Sqm | 711.58 | 339.1 | 2,41,296.78 |
| 48 | New work (three or more coats) | Sqm | 167 | 32.45 | 5,419.15 |
| 49 | New work (Two or more coats applied @ 3.84 kg/10 sqm) | Sqm | 4664.83 | 97.6 | 4,55,287.41 |
| 50 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture | Sqm | 3020.68 | 140.05 | 4,23,046.23 |
| 51 | New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution | Sqm | 100 | 150.2 | 15,020 |
| 52 | Two or more coats on new work | Sqm | 468 | 131.45 | 61,518.6 |
| 53 | Two or more coats on new work | Sqm | 2000 | 121.45 | 2,42,900 |
| 54 | Two coats | Sqm | 7 | 90.05 | 630.35 |
| 55 | Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface | Sqm | 200 | 111.6 | 22,320 |
| 56 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | cum | 273.5 | 2,007.1 | 5,48,941.85 |
| 57 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | cum | 20 | 2,928.1 | 58,562 |
| 58 | In cement mortar | cum | 125.25 | 1,698.45 | 2,12,730.86 |
| 59 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 910.74 | 219.35 | 1,99,770.82 |
| 60 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Metre | 763.2 | 179.5 | 1,36,994.4 |
| 61 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. | Sqm | 1000.8 | 951 | 9,51,760.8 |
| 62 | Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately).(Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately). | cum | 2395 | 8,277.55 | 1,98,24,732.25 |
| 63 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. | Sqm | 113.64 | 108.65 | 12,346.99 |
| 64 | Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost). | Sqm | 55.79 | 362.3 | 20,212.72 |
| 65 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in- Charge. | Sqm | 1370.18 | 1,719 | 23,55,339.42 |
| 66 | 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. | Sqm | 44.63 | 1,011.2 | 45,129.86 |
| 67 | White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap | Each | 2 | 1,679.6 | 3,359.2 |
| 68 | 610x460 mm bowl depth 200 mm | Each | 2 | 3,337.85 | 6,675.7 |
| 69 | 3240 (40 mm OD ) pipe | Metre | 106 | 646.2 | 68,497.2 |
| 70 | 4050 (50 mm OD ) pipe | Metre | 116 | 785.35 | 91,100.6 |
| 71 | 15 mm nominal dia Pipes | Metre | 1847.11 | 221.35 | 4,08,857.8 |
| 72 | 20 mm nominal dia Pipes | Metre | 1447.11 | 275.25 | 3,98,317.03 |
| 73 | 150 mm nominal dia Pipes | Metre | 347.1 | 5,871.25 | 20,37,910.88 |
| 74 | 15 mm dia nominal bore | Metre | 16 | 304.15 | 4,866.4 |
| 75 | 20 mm dia nominal bore | Metre | 46 | 373.35 | 17,174.1 |
| 76 | 25 mm dia nominal bore | Metre | 16 | 491.2 | 7,859.2 |
| 77 | 65 mm dia nominal bore | Metre | 1863.12 | 768.6 | 14,31,994.03 |
| 78 | 15 mm nominal bore | Each | 94 | 303.85 | 28,561.9 |
| 79 | 20 mm nominal bore | Each | 24 | 327.95 | 7,870.8 |
| 80 | 25 mm nominal bore | Each | 8 | 532.35 | 4,258.8 |
| 81 | Up to 300 mm dia | Quintal | 8 | 5,649.65 | 45,197.2 |
| 82 | 150 mm dia pipe | Metre | 90 | 1,824.7 | 1,64,223 |
| 83 | Up to 6 metres depth | Metre | 24 | 618 | 14,832 |
| 84 | Beyond 6 m and up to 12 m depth | Metre | 24 | 730.95 | 17,542.8 |
| 85 | Beyond 12 m and up to 18 m depth | Metre | 100 | 847.35 | 84,735 |
| 86 | Providing and fixing to filter and lowering to proper levels 40 mm G.I. pipe for tube well including cleaning and priming the tube well. | Metre | 120 | 499.8 | 59,976 |
| 87 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Litre | 2000 | 9.7 | 19,400 |
| 88 | 15 mm nominal bore | Each | 12 | 715.05 | 8,580.6 |
| 89 | 15mm nominal bore | Each | 14 | 500.35 | 7,004.9 |
| 90 | 450 mm dia RCC pipes. | Metre | 735.54 | 2,385.5 | 17,54,630.67 |
| 91 | 100 mm nominal size dia | Metre | 120 | 553.2 | 66,384 |
| Schedule total | ₹7,94,70,478.93 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC2022LatestcorrectionslipupdateduptoACS11.pdf
ATTACHMENT
SpecialconditionforPowerofAttorney.pdf
ATTACHMENT
Instructionstotendererwithspecialconditions.pdf
ATTACHMENT
HQJPO_Digginginthevicinityofcable_20.05.24.pdf
ATTACHMENT
TrackConditionnew.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].