Extension of room in existing control room building for accommodation of New C R panel, RTUs and MPLS panels at 10 33 11KV Palayapettai SS

Amount

Dismantling and Clearing Brickwork in C.M the debries and carefully disposed away from site including labour charges lead lift etc.,

Dismantling and Clearing Doors and Windows away the debries and carefully stacking the materials for reuse including labour charges lead lift etc.,

Earthwork excavation in hard stiff clay, stiff black cotton, hard red earth, shales murram gravel stoney earth and earth mixed with small size boulders and hard gravelly soil for foundation including labour charges lead lift etc.,

Earthwork excavation in soft disintegrated rockincluding labour charges lead lift etc.,

Earthwork excavation in medium rock including labour charges lead lift etc.,

Refilling with excavated sand complying with standard specification for filling in foundation and basement

Providing antitermite treatement in 4 stages I.immediately after earthwork excavation and before laying foundation concrete ii.after refilling for sides of foundation iii. Before laying of flooring concrete and outside of basement upto 1m alround the building using termit 250ml for 5 litres of water.

PCC 1:4:8 mix using 40mm HBG With out form work(machine crushed) metal for foundation including cost of all materials lead lift curing etc complete.

RR masonry in CM 1:6 mix using hard blue granite stone for foundation and basement including cost of all labour materials lead lift curing etc complete.

Collection and supply of good quality of gravel and stacking them to Departmental gauge for premeasurements including cost of all materials lead, lift, loading,unloading etc.,complete.

Filling Quarry Dust and stacking them to Departmental gauge for premeasurements including cost of all materials lead, lift, loading,unloading etc.,complete.

Brickwork in CM 1:5 mix using IInd class chamber burnt brick of size 9"x 4 1/2"x 3" including cost of all materials labour lead lift curing etc complete.

Brickwork in CM 1:3 mix using IInd class chamber burnt brick of size 9"x 4 1/2"x 3" including cost of all materials labour lead lift curing etc complete.

Providing Shutter for sides of R.C.C./ plane surface, including strutting ,using M.S sheets and supported by causurina props complying with standard specification etc complete.

Plinth beam

varandah pillar

sunshade , Sill Slab

RCC roof slab

Supplying and fabricating and placing in position of MS/RTS steel reinforcement for RCC works including labour for cutting bending tying and Fixing in position as per specification including cost all materials lead lift cost of binding wire etc complete.

RCC 1:1.5:3 mix using 12mm to 20mm HBS metal (machine crushed) for lintel, Sunshade,T beam, roof slab concrete without formwork including all cost labour materials lead lift curing etc complete but excluding cost of steel reinforcement (By using mixer machine and vibrator)

Special ceiling Plastering for RCC slabs, beams and sunshade with CM 1:3, mix 10mm thick for ceiling including hacking all cost labour materials lead lift labour curing etc complete.

Applying one coat of Zinc primer for steel before applying Special ceiling plastering all cost labour materials lead lift labour curing etc complete.

Special ceiling Plastering for RCC slabs, with CM 1:3, mix 10mm thick with Nitobond SBR 0.175lit/bag and concure WB white for curing including all cost labour materials lead lift labour curing etc complete.(curing does not required)

Plastering with CM 1:5, mix 12mm thick for wall including all cost labour materials lead lift labour curing etc complete.

Flush Pointing with CM 1:3, mix 12mm thick for Randam rubble including all cost labour materials lead lift labour curing etc complete.

Cement morter floor finising with C.M 1:3 20mm thick including cost of all materials, labour, lead, lift etc. complete. .

Providing border in CM 1:3, 12mm thick, 75mm width including cost of all materials, labour, lead, lift etc. complete.

Providing border in CM 1:3, 20mm thick, 200mm widthincluding cost of all materials, labour, lead, lift etc. complete.

Paving the approved quality of stain free nano vitrified tiles size 600x600x8 mm over a base layer of Cement mortor 1 : 3, 20 mm thick pointing with same coloured cement finishing the joints including of all materials, labour, lead, lift, etc complete as per the direction of Engineer at site.

Supplying and fixing of single leaf door in anodized aluminum section partially paneled with decorative finished pre- laminated particle board 8mm thick both sides and partially 4mm tnick plain glass with the sections 63.5x38.10x1.95mm box section for frame and using door section 85x44.45x22mm for vertical, 48x 44.5 x2mm for top and 47.62x44.45x3.18 middle, 95.25x44.45x 25.4x2mm for bottom etc., with all necessary fixtures such as handles(American), hinges(4"), lock(Godrej), Namath etc., complete including cost of all materials, lead, lift, etc., complete as directed by the Engineer at the site.

supply and fixing pre-painted galvanized iron three track sliding panel sliding window fabricated from roll formed sections for outer frame three track 92x44mm , shutter should be 35x49mm with a 4mm plain glass , section for euro groove should be 25mmx24mm and for lab strip 30x41mm . the frame and shutter sections cut and joined with corner brackets made of glass filled nylon . frame should be fixed to brick masonry by using nylon self-expanding caps and driving MS electro plated 80mm long screws into the cap through frames.

Supplying and fixing solid PVC door shutters using 19Gauge 19mm MS square tubes for styles and out frames 15mm MS square tubes for top, lock and bottom rails.the steel tubes shall be covered with 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings.the over all size of styles shall be 50x30mm. the over all size of top rail, lock rail and bottom rail shall be 75mm x30mm . the over all size of frames shall be 50x45mm with suitable rabate for housing the shutter .

Wiring with 2 x 1.5 sqmm (22/0.3) PVC insulated unsheathed Sc Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T. switch with painting of suitable colour with continous earth wire connection of 14SWG wire for open PVC light point / fan point (For electronic regulator) (SD-16)

Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch on suitable TW box (SD-133)

Wiring with 2x4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 mm x 100 mm x 63mm TW switch box for 15 A 3 pin non inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point. (SD-39)

Supply and fixing of single box type 4' 18 W crystal glass LED tube ight fitting complete ,with PVC unsheathed Copper leads from terminals to the fitting

Supply and fixing of single box type 4'x40 W flu fitting complete with copper choke and condensor,with PVC unsheathed Copper leads from terminals to the fitting with tube. (SD-88)

Supply and fixing of twin box type 4'x40 W flu fitting complete with copper choke and condensor,with TW round block on wall or ceiling with tubes and PVC unsheathed Copper leads from terminals to the fitting with tube. (SD-90)

Supply and fixing of 1400 mm (56") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clampwith approved quality of crompton/rally/ usha/ bajaj fan including all cost of material, etc complete. (SD- 111)

supply and fixing of 375mm(15") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall including labour, lead ,lift, etc complete (SD:116)

Supply and fixing of louvers shutters arrangement for 375mm (15")sweep light duty AC Exhaust fan complte.(SD:121)

Supplying and fixing in position best quality PVC 110mm dia down fall pipe - 6kg/sq.cm, having ISI mark including the cost of PVC pipe, all materials, labour, lead,lift, T&P etc -1RM

Supplying and fixing in position best quality PVC soil/waste pipe 110mm dia- 6kg/sq.cm, Finolex or Equivalent (with ISI monogrm) including GI TEE, GI Elbow,excavation wherever necessary all materials, labour, lead,lift, T&P etc -1RM

Supplying and fixing of 110mm dia PVC pipe of 3m height with cowl for ventilating shaft with supporting brick work ,including all cost of materials lead lift etc complete.for septic tank.

Supplying and Laying of 32mm dia 6Kg/cm² PVC Pipe with necessary GI Specials including Cost of all materials , lead, lift etc Complete.

Fixing of PVC water tank of 500 litres capacity including GI nipple , all materials, labour, lead,lift, T&P etc

Providing inspection chamber of size 0.45x0.45x0.45m to a max depth of 0.90m with CI manhole cover with bracket with necessary earth work excavation PCC 1:3:6, BW in CM1:6mix,plastering in CM 1:3 mix,12mm thick and sand filling including cost of all materials,curing,labour,lead,lift etc.,and man hole cover..

Providing weathering coarse with one course of pressed tiles of size 25x25x2cm embeded in CM 1:3 mixed with crude oil 10% by weight of cement and pointed with the same oil mixed CM 1:3 used over a bed of brick jelly lime concrete of 80mm thick with ratio of 32:12.5 etc ( No sand ) with the required slope and beaten with wooden beaters including cost of all materials curing etc complete.

Supplying and fixing of 6mm chequered plate,MS channel , Angle including the cost of materials,lead lift, etc, complete

Supplying and fixing Pre cast RCC slab using 1:1.5:3 mix concrete for septic tank cover slab, cub board slab ,man Hole Cover slab including all cost of materails lead lift etc complete.(exculding Steel reinforcement)

Supplying and filling with 40mm HBG complying with standard specification for filling in foundation and basement

White Washing two coat of white cement including the cost of all materials, labour, lead, lift, T&P etc complete.

Colour Washing Two coats using plastic emulsion paint over one coat of Primer for inner and outer wall after through scrapping including the cost of all materials, labour, lead, lift, T&P etc complete

Painting 2 coats of approved quality of enamal paint over a ready mixed primary coat for all exposed faces of new steel doors & windows and grill etc including cost of all materials , scrapping, labour, lead,lift etc complete.

GST 18% as per GOVT norms

Sp Constructions