PERIODICAL SERVICES TO VARIOUS BUILDINGS AT MOTITIBBA BAKROTA AND DAINKUND AND CERTAIN REPAIR TO VARIOUS BUILDINGS UNDER AGE B R AT AF STATION DALHOUSIE

Amount

Taking down cement plaster on brick wall upto any height and ceilings including raking out joints hacking for key srcubbing down with water complete all as specified and directed by Engineer-in-Charge.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and labour 5 mm thick cement plaster in cement mortar 1:3 on celings, surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of new plastered surfaces and applying two coats of exterior acrylic paint of any shade in comouflaged pattern as approved by GE as per manufacturers instruction complete all as specified and directed by Engineer-in-Charge.

Material and labour for Preparation new surfaces of wall and applying two coats of oil emulsion distemper over a coat of 3 mm thick wall putty complete all as specified and directed by Engineer-in-Charge.

Material and labour for Preparation new surfaces of ceilings and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed by Engineer-in-Charge.

Material and labour for Preparation old surfaces of wall and applying two coats of oil emulsion distemper over a coat of 3 mm thick wall putty complete all as specified and directed by Engineer-in-Charge.

Material and labour for Preparation old surfaces of wall and applying two coats of oil emulsion distemper complete all as specified and directed by Engineer-in-Charge.

Material and labour for complete removal of existing treatment and applying two coats of oil emulsion distemper on old decorated wall surfaces complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of old surfaces of ceilings and applying two coats of white wash complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of old surfaces of walls and applying two coats of white wash on walls complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of old painted steel and iron surfaces of any description over 10 Cm width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Material and labour for complete removal of existing treatment and applying three coats of white wash on old decorated plastered surfaces of ceilings complete all as specified and directed by Engineer-in-Charge.

Material and labour for complete removal of existing treatment and applying three coats of white wash on old decorated surfaces of walls complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of old decorated surfaces of wood of any description not otherwise described over 10cm in width or girth and applying One coat of Synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of old decorated surfaces of wood of any description not otherwise described over 10cm in width or girth and applying two coats of Synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Dismantling plain corrugated asbestos /translucent sheet in roof covering including redges complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa and finishing with resin coat on both surfaces @ 150 gm/sqm of coating as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 0.63mm thick galvanised, corrugated mild steel sheeting with two corrrugations side lap, fixed with coach screws and washers, in roofs, wall etc. with grade of zinc coating 275 complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 0.63mm thick galvanised, plain mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of new steel and iron surfaces of any description over 10 Cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer over a coat of moderant solution to remove zinc coating complete all as specified and directed by Engineer-in-Charge.

Dismantling wrought iron of mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Fe 410-W(Gde E 250)quality A rolled mild steel in roof trusses (framed) trussed, purlins, crane gantries, rails and framing (beam, tee, angle, channel or flat sections) including distance pieaces cleats complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Fe 410-w(Gde E 250)quality B MS plates plain or chequered square cut or notched forming holes drilled or welded any thickness complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by Engineer-in-Charge.

Supply and fixing compound girders, and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. Built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plate,etc of Fe-410w(Gde-E-250) quality complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of new steel surfaces and applying two coats of synthetic enamal paint over one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

Dismantling of wall or ceiling boards (fibre,pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness including cover fillets complete all as specified and directed by Engineer-in-Charge.

Providing & fixing 4 mm thick false ceiling at all heights with GRS (semi perforated 12 mm thick micro tegular edged GRS false ceilling) false ceiling tile of size 595X595 mm of approved texture ,design and pattern having moisture content less then 2 %, humidity resistance of 99%,NRCO .50 to 0.75 as per IS 8225 :1987, Noncmbustiible as per IS 476 (part 4)-1970 and light reflectance of 855 (minimum) to be laid in true horizontal level suspended on interlocking metel T grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @120 gms per sqm including both side) comprising of main T runners of size 15X32 mm length 3000mm ,cross T of size 15X32 mm of length 600mm to from grid module of size 600mm X600mm suspended from Ceiling using galvanised mild steel items (galvanizing @ 80 gms per sqm) i e 50mm long ,8mm outer dia M-6 hanger rod upto 1000mm length and L shape level adjuster of size 85X25X2mm galvanised iron perimeter wall angle of size 24X24X0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plug at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications ,drawing and complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhat or frame with shutters (with out taking off the shutter from the frame ) n. exc 1.5 Sqm each complete all as specified and directed by Engineer-in-Charge.

All as per ser item No 32 above but exc 1.5 sqm but ont exc 4 Sqm each complete all as specified and directed by Engineer-in-Charge.

Taking down shutter area exc 1 Sqm but not exc 2 sqm each complete all as specified and directed by Engineer-in-Charge.

Taking down shutter and refixing after easing, adjusting area exc 1 Sqm but not exc 2 sqm each complete all as specified and directed by Engineer-in-Charge.

Supply and fixing PVC solid door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinfoced with MS square tube, suppling and fixing in opening as per specification and drawing complete all as specified and directed by Engineer-in-Charge.

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisiting of frame made out of M.S. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification & drawing complete all as specified and directed by Engineer-in-Charge.

Supply and fixing aluminum frame powder coated for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge.

Supply and fixing any colour, aluminum door shutters powder coated , aluminium section weighing 0.55 Kg/ Sqm including necessary jointing cleats, glazing clips, ruber neoprene packing, handles 02 Nos in each door, hinges, anodised aluminium snap beading, screws complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 5.5 mm thick tinted/plain glass for aluminium windows/ doors having each pane exc 0.5 sqm including complete fittings complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 5 MM thick plain colour PVC backelight sheet in strips channel feathered at for fixing on aluminium frame partition complete all as specified and directed by Engineer-in-Charge.

Material and labour for Ist class hard wood plain or solid straight chowkats and frames, wrought framed rebated on the solid, rounded or chamfered, put togather with glue pinned at joints complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 35 mm thick factory made plain framed panelled shutters (two planel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of the rail and stile as per IS:1003(Part I), kiln sseasoned and chemically pressure treated complete all as specified and directed by Engineer-in-Charge.

Supply and fixing locally fabricated glazed and skelton shutters 35mm thick open rebated and prepared to receive glass,gauge etc (without sash bars) edging of framing plain, chamfered or rounded with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I, Section 8, Clause 8.24(a) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 100 mm butt hinges, heavy weight, cold rolled mild steel and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 150 mm size aluminium handles, cast type,anodised complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 150 mm aluminium anodised barrel tower bolts extruded section fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed by Engineer-in-Charge.

Material and labour for two coat of Synthetic enamel paint over a coat of pink primer on new wood surface of any description not otherwise described over 10cm in width or girth including preparation of new surfaces complete all as specified and all as directed by Engineer-in-Charge.

Dismantling floor hearth wall tiling (but not backing) removing servicable tiles to store rubbish off the premisses complete all as specified and directed by Engineer-in-Charge.

Material and labour 15mm thick screed bed or bedding layer of cement mortar 1:4 to laying floor finish complete all as specified and directed by Engineer-in-Charge.

Material and labour non skid ceramic colour tiles 7 to 8 mm thick joint free edge cut (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm(300mmx300mmx7 mm thick) set and jointed in neat cement slurry and pointed in colour cement to match as in floor complete all as specified and directed by Engineer-in-Charge.

Supply and fixing vitrified ceramic tiles light shade, 10 mm thick (square/rectangular) polished, area of each tiles not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or coloured cement to match including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.

Material and labour glazed ceramic colour tiles 300mmx450mm/300mm x200mm x7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as skirting/dado over cement mortar rendering/screding 10mm thick in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.

Material and labour for 20mm thick granite black slab, machine cut, well polished, bedded in 15mm thick in cement mortar 1:4 as in cooking plaforms & like and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixtures of pigments to match the shade of granite stone including cutting and polishing complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 5mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed by Engineer-in-Charge.

Supply and fixing solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvant cement and fixing at site on PVC frame as per specification and drawing complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair, viterous china squatting pan of pattern long pan, size 580x440mm, white with intergral footrest including 'P' or 'S' trap front and back inlet any pattern including provision of lime concrete bedding complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair vitreous china ware wash hand basin white flat back size 550mm x 400mm excl taps, waste chain and plug and porecelain stopper but incl bracket and cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs vitreous china wash down water closet (Pedested patern ) white incl fixing bolt, plastic water closet seat cover black/white closed pattern with flat bottom and cover and mild steel chromimum plated hinging device, fixed in repairs complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair PVC white low level flushing cistem 10ltrs capacity with all fittings syphonic action push stype with inlet ball valve and float including PVC flush pipe, ball valve, handle, MS bracket complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs waste pipe suitable for Existing WHB/Sink/Urinal complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair waste Coupling Suitable for Existing WHB/Sink complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Hot and cold mixer fancy type single or double legged cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends iron pipe suitable for 15mm bore pipe fixed to wash hand basin complete all as specified and directed by Engineer-in-Charge.

Supply and fixing brass CP wall Mixer (swan nack for kitchen) for mixing hot & cold water screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fixing brass CP wall Mixer for mixing hot & cold water screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair PVC connection, 60cm long, 15mm in size with PTMT nust and PVC washers at both ends complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Bib taps cast copper alloy chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule 15mm bore, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 15mm Angle/stop/gate valves, fancy type chromium plated, screwed down, high pressure with crutch or butter fly handle screwed at two right angles ends for both iron pipe complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair stop/gate valve,15 mm cast copper alloy chromium plated fancy type with long shank & cup (concealed type) with capstan heads, screwed down, high pressure, with crutch or butterfly handle screwed for 15mm bore iron fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair brass chhromium plated tubular tower rail 20mm dia , D type, 60cm long between flanges complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Soap dish stainless steel chromium plated fixed with brass screws and rawl plug complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Acrylic corner set of 3 pieces as per sample approved by Engr -in-charge complete all as specified and directed by Engineer-in-Charge.

Supply and fixing repairs Chromium plated health faucet for EWC with 1 meter long CP tube with CP wall hook superior quality complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Toilet paper holder of Chromium plated fixed to walls with chromium plated (CP) brass screws, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair rubber door seal 32mm wide and 900 mm long with Aluminium strip of size 19mm wide fixed with machine steel screw with washer complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair for pre-fabricated stainless steel plate rack made out of 1 mm thick stainless steel plate jointed with brass screws of size 600 x 750mmx 250mm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair rotational moulded,minimum 3 layers HDPE water storage tank of 500 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball( of minium weight 210 gms) and refixing of inlet, outlet & overflow pipe complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair rotational moulded,minimum 3 layers HDPE water storage tank of 1000 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball( of minium weight 210 gms ) and refixing of inlet, outlet & overflow pipe complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair single bowl sinks with drain board made of stainless steel 1mm thick kitchen with plugs, washers, including bedding in cement mortar or fixing cantilever bracket and connecting union to pipe, overall size 915mmX460mm bowl size 410mmX330mmX160mm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing PVC cabinate mirror coloured of size 350x450mm fixed with screw and PVC gutty on wall complete all as specified and directed by Engineer-in-Charge.

Demolition of brick work built in cement mortar including all quoins arches pillars complete all as specified and directed by Engineer-in-Charge.

Material and labour brick work with sub class 'B' bricks in cement mortar 1:6, straight or curved on plan exc 6 mtr nean radius, using old size bricks complete all as specified and directed by Engineer-in-Charge.

Material and labour brick work with sub class 'B' bricks in cement mortar 1:6, straight or curved on plan exc 6 mtr mean radius, using old size bricks but except bricks complete all as specified and directed by Engineer-in-Charge..

Demolition of cement Concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) or as in sunken complete complete all as specified and directed by Engineer-in-Charge..

Material and labour PCC 1:3:6, type C-2, 50mm thick as in plinth protection, Surface finished fair and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge..

Taking down cement plaster on brick wall upto any height(max of triple storey) and ceilings including raking out joints hacking for key srcubbing down with water complete all as specified and directed by Engineer-in-Charge.

Material and labour15mm thick rendering in cement mortar 1:6 on fair faces of brick work surace rendering is to be even and smooth with out using extra cenent complete all as specified and directed by Engineer-in-Charge.

Material and labour15mm thick rendering in cement mortar 1:4 on fair faces of brick work surace rendering is to be even and smooth with out using extra cenent complete all as specified and directed by Engineer-in-Charge.

Material and labour 5 mm thick cement plaster in cement mortar 1:3 on celling surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Material and labour for Preparation new surface of wall and applying two coat of oil emulsion distemper over a coat of 3 mm thick wall putty complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of new plastered surfaces and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/lit and UV resistance as per IS 15879;2004, Alkali and fungal resistance , dirt resistance exterior paint of requirede shade (Company Depot Tinted) with silicon additives @1.43lit/10sqm over and including priming coat of exterior primer [email protected]/10sqm over new surfaces complete all as specified and directed by Engineer-in-Charge.

Material and labour for three coats of white wash on newly plastered surfaces of ceiling including prepration of new surfaces complete all as specified and directed by Engineer-in-Charge.

Taking down steel water tubing and connections, cleaning and refixing old 15 mm bore steel tubing and connections in new or old position with walls , ceiling, floors complete all as specified and directed by Engineer-in-Charge.

Taking down steel water tubing and connections, cleaning and refixing old 20 mm bore steel tubing and connections in new or old position with walls , ceiling, floors complete all as specified and directed by Engineer-in-Charge.

Supply and fixing medium grade steel water tubing, 15 mm bore galvanised (including taking down) with all fittings such as Union , Tank nipple with tank fittings and socket, elbow, nipple etc. and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fixing medium grade steel water tubing, 20 mm bore galvanised (including taking down) with all fittings such as Union , Tank nipple with tank fittings and socket, elbow, nipple etc. and fixed complete all as specified and directed by Engineer-in-Charge.

Cutting chases in brick wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair door closer hydraulically regulated made up of aluminium extruded section body universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed by Engineer-in-Charge.

Supplying and applying 2 coats (consumption : 2.5Kg/Sqm/2Coats) of acrylic polymer modified cementitious waterproofing coating over prepared concrete/masonry surface by brush or trowel strictly maintaining the coverage including cleaning the surface from dust, mortar splashes and loosely adhering particle with hammer chiseller, wire brush, nylon brush and water jetting. Repairing of all cracks and honey combing with polymer cement sand mortar admixed with waterproofing compound. The liquid polymer component and cementitious powder compound are mixed as per manufacturer's recommendation. The subsequent is applied when the previous coat is touch dry. Rate shall include all tools, tackles, materials, labour, shifting, loading and unloading. Water proofing should be of approved brand and make like sika/Fosroc/Pedilite, asian etc, vendor to submit necessary documents and justify if any other brands etc, completer as per Technical Specifications complete all as specified and directed by Engineer-in-Charge.

M/s ARJUN SINGH (BID ID -3159530)

Auto India (BID ID -3160652)

MS ROSHAN LAL THAKUR (BID ID -3172176)

m/S Varun Gupta (BID ID -3167966)