Remodeling of Kitchens in Ganga Sadan 12 qtrs and Bhagwati Sadan 33 qtrs at SMVD UNIVERSITY KAKRYAL KATRA

LayiRemodelling of Kitchens in Ganga Sadan (12 qtrs) and Bhagwati Sadan(33 qtrs) at SMVD UNIVERSITY, KAKRYAL, KATRA ng and Jointing PVC Pipe. Heading

Kitchen Under Cabinet Box Construction: Providing and fixing in position of knockdown position of Kitchen cabinet below counter and sizes shall range from 600 mm (W) x 560 mm (D) x 560 mm (H) to 1400 mm (W) x 560 mm (D) x 560 mm (H) approx, with exact dimensions to be finalized based on site requirements and layout made out ofBWR 19mm thick Prelamimated ply waterproof & termite resistant for top, bottom, shutters, shelves, partitions and 6.0mm thick Prelam BWR ply at back , one side decorative laminate 1mm thick and other side balancing lamination 0.8mm thick & all exposed surfaces shall be 1.0mm thick PVC edge banding tape with hot glue by edge bending machine . Floor unit cabinet boxes shall be mounted on 25mm height vertical adjustable legs.

Kitchen Overhead Cabinet Box Construction: Providing and fixing in knockdown position of Kitchen Overhead Cabinet below and Cabinet boxes shall be 900 x 310 x 700mm (approx.) with exact dimensions to be finalized based on site requirements and layout made out of 19mm thick Prelam BWR ply, waterproof & termite resistant for top, bottom, shutters, shelves, partitions and 6.0mm thick Prelam ply at back with , one side decorative laminate 1mm thick and other side balancing lamination 0.8mm thick with & all exposed surfaces shall be 1.0 mm thick PVC edge banding tape with hot glue by edge bending machine . Shelves shall be adjustable height mechanism to be supported on approved quality SS pins.

Shutters: Shutters shall be made of 19mm thick Prelam BWR ply, waterproof & termite resistant for top, bottom, shutters, shelves, partitions and 6.0mm thick Prelam ply at back , one side decorative laminate 1mm thick and other side balancing lamination 1.0mm thick & all exposed surfaces shall be 1.0mm thick PVC edge banding tape with hot glue by edge bending machine . Shutter shall be supplied with galss made of 8mm thick fixed with wooden profile. Each shutter of drawers shall be mounted with two (2) soft-closing/auto-closing hinges (approved quality) using SS screws/nails.(actual size shall be measured before manufacturing of shutters)

Hardware and Accessories: All fasteners and fittings to be of stainless steel or corrosion-resistant material. (Hardware Make : Ivas, Hettich, godrej or equivalent with Warranty - 5 Years)

Soft Close 3D Hinges (quantity as per actual at site)

Drawer Telescopic Soft-Close SS Channels Inotech 250MM(quantity shall be as per actual at site)

Cutlery Tray ss (as per site requirement)