GE S U 39 2022 23 SPECIAL REPAIR TO BLDG NO P35 AT GOLF VIEW PROVN OF

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

25 mm thick plain cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) as in sub base complete all as specified and as directed.

Coloured vitrified ceramic tiles double charged, 10 mm thick (square/rectangular) polished,area of each tiles exc 0.42 sqm but n exc 1.00 sqm, ,in floors etc over 15 mm thick screed bed in cement mortar 1:4 set set and jointed in neat cement slurry and pointed in white or coloured cement to match, grouted with epoxy material, complete all as specified and as directed.

Material and labour for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar beddig not backing and removing rubbish off the premises complete all as specified and as directed.

Vitrified ceramic tiles double charged, 10 mm thick (square/rectangular) polished,area of each tiles n exc 0.36 sqm,in skirtings etc over 10 mm thick back coat in cement mortar 1:3 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Glazed ceramic coloured tiles 600mm x 300mm x 7-8mm thick as in skirting / dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm back coat in CM 1:3 complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar as in kitchen platform, floors, aprons etc complete all as specified and as directed.

Granite slab 20 mm thick as in pillars, window cill, cooking platform and the like in cement motar 1:4 including painting in white cment 1:2 using marble dust with a mixture of pigment to match the shade of granite including cutting polishing and moulding on edges complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Demolition of cement concrete (reinforced) as in roof, floors (other than ground floor), beams, staircase, landing, chajjas and similar suspended work complete all as specified and as directed.

Design Mix Reinforced cement concrete M-25 as slabs supported on walls, beams and columns, in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick surface horizontal or sloping, fair finished surface of concrete complete all as specified and as directed.

Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and as directed.

Taking down cement plaster from brick/concrete surfaces including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and as directed.

Rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete. Note : Liquid WPC will be measured and paid separately.

Rendering 10mm thick CM 1:6 on fair faces of brick work or concrete surfaces including finishing even and smooth without using extra cement complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed. ISI marked.

Rendering 5 mm thick in CM 1:3 on concrete ceiling surfaces including finishing even and smooth without using extra cement complete all as specified and as directed.

Preparation of new plastered surfaces wall and applying two coats of oil bound distemper white or tinted with roller application over a coat of chalk whitening primer over 3mm thick wall care putty complete all as specified and as directed.

Preparation of new plastered wall/facia surfaces and applying two coats of apex advanced weather proof emulsion paint over a priming coat of exterior primer (colour of apex advance weather proof emulsion paint as approved by GE) complete all as specified and as directed.

Preparation of new plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed.

Preparation of old plastered ceiling surfaces and applying one coat of white wash complete all as specified and as directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each including cutting holes for taking out hold fasts, dismantaling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified and as directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n.exc 4 Sqm each including cutting holes for taking out hold fasts, dismantaling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified and as directed.

Pressed steel frames for doors made out of 1.25mm thick MS sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate ,12mm bar thresh hold etc. complete , of frame size 125mm x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and as directed.

Pressed steel frames for doors made out of 1.25mm thick MS sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate ,12mm bar thresh hold etc. complete , of frame size 105mm x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and as directed.

Material and labour for plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregates) as in filling of pressed steel door frame complete all as specified and as directed.

Cutting holes in brick walls in cement mortar exc half brick but not exc one brick for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and as directed.

Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe-290 Gde E-165 complete all as specified and as directed.

PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in bed blocks for hold fasts including necessary form works complete all as specified and as directed.

Flush shutter, 35 mm thick, solid core construction with block board core, and ply wood face panels and both faces covered with decorative laminate face veneer with lipping complete all as specified and as directed. Make : Century Plywood/Kit Ply/Archidply or equivalent

35 mm thick 2nd class hardwood partly glazed and skeleton and party panelled shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cat and mitred beads for securing glass etc fitted to chowkats for windows, ventilators,etc complete, size of member of shutter as specified in relevant SSR complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm x47mm made out of 5mm plain clour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and as directed.

Factory made solid panel PVC moulded door shutter, 28 to 30 mm thick(styles), with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

Mild steel cold rolled butt hinges medium weight 100 mm long complete all as specified and as directed.

Supply and fixing in 100 mm long aluminium anodised tower bolts, fixed in screws complete all as specified and as directed.

Supply and fixing in door handle, 100 mm size, aluminium anodised, complete all as specified and as directed.

Supply and fixing in 300mm long aluminium anodised, sliding door bolt with hasp, stapple (bolt type) and fixing clip of sheet, and fixing bolts and sliding bolts of stainless steel complete all as specified and as directed.

150 mm size (Overall length of cover plate) floor door stopper of aluminium body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed.

S & F in repairs mild steel, 300 mm, ordinary rat tail rod pattern door spring including roller and roller plate, fixed to frame, complete all as specified and as directed.

Powder coated aluminium door strip with brush, width of flap 30mm complete all as specified and as directed.

Preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Preparation of new wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

Powder coated Anodised aluminium window and ventilator shutters, Sliding/Hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

Supply and fixing powder coated Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge.

Supply and fixing 4mm thick sheet glass, ordinary quality and glazing with rubber beading around the glass, in squares n exc 0.50 sqm in each pane complete all as specified and as directed.

Supply and fixing 4mm thick sheet glass, frosted or grounded on one side with rubber beading around the glass, in squares n exc 0.50 sqm complete all as specified and as directed.

Solar control film 25 micron reflective type sticked to glass panes as per instruction of manufacturer including removal of existing complete all as specified and as directed. (Make :- Gareware or equivalent make)

Supply and fixing Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Dismantling wrought iron or mild steel work in any description not otherwise specifically provided for complete all as specified and as directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where everrequired) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories &stainless steel dash fasteners, stainless steel boltsetc., of required size, on the top of floor orthe side of waist slab with suitable arrangement complete all as specified and as directed.

MS Steel work in tubular trusses including special shaped washer etc complete using induction butt welded tubes conforming to IS 1161-1979 grade ST-240 complete all as specified and as directed.

Welded steel wire fabric n,exc 4kg per sqm, supplied and fixed complete to wood or steel members complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed.

Brushing neat cement slurry with 3.0kg of cement per sqm complete all as specified and as directed.

Providing, cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregates) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.

Rendering 5 mm thick on fair faces of concrete surface in CM 1:3 finished even and smooth without using extra cement with WPC at the rate of 3% by weight of cement complete all as specified and as directed.

Material and labour for cleaning the entire roof surface thoroughly to remove all loose particles, dust/dirt particles and applying with One coat of industrial bitumen 85/25 grade at the rate of 1.20 Kg/Sqm over the plastered surfaces of roof complete all as specified and as directed.

Material and labour for 3mm thick APP based polymeric membrane minimum weighing 3 kg/sqm non-woven polyester reinforcement polymeric water proofing membrane (wt not less than 150 gms/sqm) laid on primed surfaces by gas flame torch application and apply one coat of industrial bitumen 85/25 grade at the rate of 1.20 Kg/Sqm over APP Memberence complete all as specified and as directed. Note :- Water proofing treatment will be done by of approved make through a specialized agency which will further have to give a five years warranty for rectification of any defect if incurred at a later stage, otherwise no payment shall be made to the contractor if water proofing treatment is executed by engaging local labour.

Material and labour for Applying a coat of bituminous aluminium paint @0.10kg/Sqm as weather proof coat complete all as specified and as directed.

Treating the soil along with external perimeter of building at the rate of 2.25 litre of Antitermite treatment chemical emulsion per metere of the perimeter wall, complete all as specified and as directed. Note : The treatment work shall be carried through authorized agency only, and certificate for the same ofr warranty shall have to be furnished before submitting payment)

Treating the soil under plinth protection at the rate of 5 litre of emulsion per square metre of surface area complete all as specified and as directed.

Hardcore of gauge of broken stone or boulders n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

Providing 50 mm thick cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in plinth protection finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed.

Material and labour for plain cement concrete 1:4:8 type D-2 (Using 40mm graded crushed stone aggregates) as in sub base complete all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework complete all as specified and as directed.

Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Dismantling asbestos cement (corrugated, semi corrugated) etc sheets in roof covering including ridges complete all as specified and as directed.

Pre painted galvalume aluminium zinc coating GI based corrugated sheets 0.5 mm thick of any colour having tensile strenght of 550/MPA as in roof covering, cladding to wall fixed with self taping screws complete all as specified and as directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F in repairs drapery rod of 25mm dia stainless steel/powder coated decorative along with brackets and end caps of quality as approved by GE.

2nd class hardwood plain solid straight chowkats and frames wrought framed rebates on the solid, rounded or chamfered put together with glue pinned at joints supplied and fixed complete all as specified and as directed.

S & F in repairs 12mm thick with 7 ply veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces fixed with screws to timber frame work complete all as specified and as directed.

Continuous (piano) hinges, mild steel, bright finish or electro galvanised width of flaps (when open) 30 mm complete all as specified and as directed.

100mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Magnetic catches brass body and striking plate including letting in and fixed suitable for cupboard shutters complete all as specified and as directed.

Rotational molded (three layered as per IS 12701) polyethylene water storage storage tank (cylindrical vertical with closed threaded top) hoisted and fixed in position including connecting inlet/outlet pipe connecting with necessary fittings all as required at site and specified in SSR part -I of capacity 1000 litre and dismantling of old UNSV water tank of same capacity complete all as specified and as directed. (Make- Sintex/ Rotex five star)

Supply and fixing "as in repair" ball valves of size 20mm bore dia high pressure of PTMT (Make-Prayag) with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as reqd at site complete all as specified and as directed.

Taking up down steel water tubing and connection including cleaning for refixing or removal to stores for bore in pipe 15 mm complete all as specified and as directed.

Taking up down steel water tubing and connection including cleaning for refixing or removal to stores for bore in pipe 20 mm complete all as specified and as directed.

Steel water tubing medium grade GI with all fitting and fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) of nominal bore 15mm complete all as specified and as directed.

Steel water tubing medium grade GI with all fitting and fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) of nominal bore 20mm complete all as specified and as directed.

Supply and fixing "as in repair" stop valves/angle valve of 15 mm bore, but fancy type, chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions including necessary fitting as required at site complete all as specified and as directed. Make : Jaquar Cat Part No LYR-38053/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware

Supply and fixing "as in repair" stop valves of 20 mm bore, but fancy type, chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions including necessary fitting as required at site complete all as specified and as directed. Make : Jaquar/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware

Supply and fixing in repairs Bib tap 15 mm bore, brass, chromium plated, fancy type with crutch or butterfly handle conforming to IS screwed down, screwed for iron pipes or for brass ferrule complete all as specified and as directed. Make : Jaquar Cat Part No ARI-39037/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware

Supply and fixing in repairs two way Bib tap 15 mm bore, brass, chromium plated, fancy type with crutch or butterfly handle conforming to IS screwed down, screwed for iron pipes or for brass ferrule complete all as specified and as directed. Make : Jaquar Cat Part No ARI-39041/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware

Supply and fixing in repairs sink mixer with regular swinging spout (wall mounted model) with connecting legs and wall flanges, 15 mm bore, brass, chromium plated, fancy type with crutch or butterfly handle conforming to IS screwed down, screwed for iron pipes or for brass ferrule complete all as specified and as directed. Make : Jaquar Cat Part No ARI-39309/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware

Supply and fixing in repairs long body Bib tap 15 mm bore, brass, chromium plated, fancy type with crutch or butterfly handle conforming to IS screwed down, screwed for iron pipes or for brass ferrule complete all as specified and as directed. Make : Jaquar Cat Part No CON-107KN/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware

S&F as in repairs fancy type single lever basin mixer Pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered "HOT" or "COLD" with long screwed shanks and fly nuts, screwed for iron pipe of bore 15mm complete all as specified and as directed Make : Jaquar Cat Part No ARI-39001B/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware

S&F in repair water closet white vitreous china ware Orissa pattern of size 580mm x 440mm with integral foot rest ‘P’ or ‘S’ trap 100mm dia front or back inlet including provision of PCC bedding 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) and connection pipes (excluding flushing cistern but including flushing pipe 32 mm dia MS chromium plated) (rate also include for taking off unhygienic of WC) complete all as specified and as directed.

Supply and fixing in repairs vitreous china wash hand basin white flat back size 550mm x 400mm excluding taps waste chain and plug and porcelain stopper but including brackets waste fitting brass chromium plated 32mm dia with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed etc complete all as specified and as directed.

Supply and fixing in repairs Brass wall mixer, Chromium plated 3 in 1 system with provision of both telephone shower and overhead shower complete with 115 mm long bend pipe and wall flange all as per Cat part No.8275 of Prayag Cat Part No.CON-281KN of Jaquar or T1723C of HR Johnson or G1417A1 of Parryware or equivalent of KOHLER / MARC complete all as specified and as directed.

Supply and fixing in repairs hand shower fixed complete all as specified and as directed. Make : Jaquar Cat Part No HSH-1737/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware

S&F as in repairs Vitreous China wash basin white, flat back of size 170 x 500 x 430 mm excluding tap, chain, plug and porcelain stopper but including brackets and cutting for and pinning in ends of brackets complete all as specified and as directed. Make : Jaquar Cat Part No KUS-WHT-2179/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware

S & F in repairs PVC connection 15 mm size with PTMT (Make-Prayag) Nuts of length 450 mm complete all as specified and as directed.

PVC waste pipe for WHB/Sink 32 mm/ 40 mm bore with one end with socket complete all as specified and as directed.

Sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. Make : Prayag/Blue star/Neelkanth /Nirali /Jayana/Silvershine.

Supply and fixing in repairs Matt finish stainless steel sink, double bowl , made out of 1mm thick sheet for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets connecting union overall size 810mm x 510mm x 203 mm with bowl size 405mm x 354mm x 203mm fixed complete all as specified and as directed. Make : Prayag Cat Part No 1232DM or equivalent Blue star/Neelkanth/Nirali/ Jayana/Silvershine.

Supply and fixing in repairs PVC valveless, syphonic action, flushing cistern low level 10 ltrs capacity, white with inlet ball valve float and handle including brackets and flush pipe of polyethylene of low or high quailty PVC 32mm dia complete all as specified and as directed.

S&F in repair CP tubular towel rail , 600mm long between flanges aluminium anodised, fixed with rawl plugs complete all as specified and as directed. Make : Jaquar Cat Part No CAN-1111NM/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware

S&F in repairs Brass CP Over head Shower rose 200mm x 200mm Square shaped single flow CP with and including shower arm 400mm x 25mm x 25mm square shaped for wall mounted showers, ABS body chrome plated with grey face plate with rubit cleaning system screwed for iron pipe of 15mm complete all as specified and as directed. Make : Jaquar Cat Part No OHS-1819/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware

S&F in repairs Brass chromium plated shower rose 125mm size including shower arm complete all as specified and as directed.

Supply and fixing in repairs stainless steel grating doom 100mm dia complete all as specified and as directed. Make Prayag/Parryware/Johnson/ Kohler/Marc

CP towel rack 600 mm long with lower hangers complete all as specified and as directed. Make : Jaquar Cat Part No ACN-1181N/Cera /Prayag/KOHLER / MARC /HR Johnson /Parryware

S &F in repair sheet glass shelf assembly 500mm x 125 mm consisting of 5.5 mm thick sheet glass shelf with chromium plate bracket guard and railing 60 cm long complete all as specified and as directed. Make :- Prayag Cat Part No BEA-47/Jaquar/ Cera/KOHLER / MARC /HR Johnson /Parryware

S &F in repair corner glass glass shelf with chromium plate bracket guard and railing complete all as specified and as directed. Make : Prayag Cat Part No BEA-52/Jaquar/Cera/ KOHLER / MARC /HR Johnson /Parryware

S&F in repair gun metal globe gate valve 20 mm bore complete all as specified and as directed.

S&F in repairs one unit EWC complete all as specified and as directed. Make : Jaquar Cat Part No ZPS-WHT-1028

S & F in repairs CP health faucet with 8mm dia 1.00m long flexible tube and wall hook with all accessories all as aproved Make : Jaquar Cat part No ALD-CHR-579/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware

Supply and fixing Stainless steel Plate rack of size 780mm x 910 x 250mm (31"x36"x10") with separators and 3 tier shelves, provisioning of hook 9 Nos made out of stainless steel sheet of grade AI SI-304 and fixed in repairs complete all as specified and as directed. Make :- Cat Part No P-348 of Prayag or equivalent

Removal of concrete and plaster debris to a distance upto 250 m and depositing where directed at a level n exc 1.50 m above the starting point complete all as specified and as directed.

PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.

75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and as directed.

All as per item No 118,above above but 75 mm bore pipe complete all as specified and as directed.

110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and as directed.

All as per item No 120, above but 75 mm bore pipe complete all as specified and as directed.

110 mm bore PVC (SWR) bends with access door any radius complete all as specified and as directed.

All as per item No 122, above but 75 mm complete all as specified and as directed.

110 mm bore PVC (SWR) junction single (Single T) with access door any radius complete all as specified and as directed.

All as per item No 124 above but 75 mm complete all as specified and as directed.

110 mm PVC (SWR) vent cowl complete all as specified and as directed.

Dismantling wall and ceiling boards, fibre pulp insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

S & F in repairs Anodised aluminium snap grid frame work of size 605mm x 605mm, for false ceiling, including necessary fixing arrangement with ceiling complete all as specified and as directed.

Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40mm x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

AC desiner composite ceiling board 4 to 6m thick size 600mm x 600mm panel confirming to IS -14682 type-3 category, complete all as specified and as directed.

S & F in repairs 12mm thick Plywood, grade BWP, type BB fixed with timber frame as in modular kitchen cabinets, cupboard shutters etc complete all as specified and as directed.

0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed.

Material and labour for sand filling as a cushioning/ bedding complete all as specified and as directed.

Material and labour for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 gradewith grey cement and no pigment complete all as specified and as directed.

Dura stone heavy duty vitrified tiles 10 mm thick Square/rectangular tiles area of each tile not exceeding 0.36 Sqm as in floors set and jointed in neat cement slurry and pointed in clooured cement to match the surface over 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

Material and labour for old size brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Material and labour for providing precast cement concrete louvers and jallies, 50mm thick (measured solid) including all mouldings set in cement mortar 1:6 type B-0 1:2:4 (using 12.5 mm graded crushed stone aggregates) complete all as specified and as directed.

Providing Reinforced cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregates) as coping and the like, including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

Providing, cement concrete 1:2:4 tye B-1 (using 20 mm graded crushed stone aggregates) as in coping and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, Fe-410 W) Gde E-250) Quality A complete all as specified and as directed.

1.25 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in any type of soil complete all as specified and as directed.

Broken glass coping on top of walls in cement mortar 1:3 complete all as specified and as directed.

Screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 laying floor finishes complete all as specified and as directed.

Rendering 10 mm thick on fair faces of brick / concrete surfaces in cement mortar 1:3 and finished even and fair for receiving tiles complete all as specified and as directed.

Vitrified dark shade tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36Sqm,as in floor etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Two coat of Oil bound distemper including a coat of primer over a layer of birla white putty including preparation of newly plastered surfaces of wall complete all as specified and as directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard /dense soil complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, & n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in hard /dense soil, complete all as specified and as directed.

Removing excavated material (soils) exceeding 250 m but n.exc. 500m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Reinforced cement concrete M-25 (using 20mm graded crushed stone aggregates) design mix as in foundations, including rafts, footings, foundation, beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

Reinforced cement concrete M-25 (using 20mm graded crushed stone aggregates) design mix columns, pillars, piers,posts and struts complete all as specified and as directed.

Reinforced cement concrete M-25 (using 20mm graded crushed stone aggregates) design mix as in beams, cantilevers,bressummers, lintels over 1.5m span complete all as specified and as directed.

Reinforced cement concrete M-25 (using 20mm graded crushed stone aggregates) design mix as in chajjas complete all as specified and as directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter for rough flat finished surfaces of concrete complete all as specified and as directed.

Formwork to sides of pillars,posts, struts, piers, columns and stanchions for rough flat finished surface of concrete, complete all as specified and as directed.

Formwork to flat sides and soffits of or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams complete all as specified and as directed.

Formwork to soffits of suspended flat slabs such as roof slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

Formwork to edges of concrete flats, treads breaks in floors, window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in wall, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed.

Formwork to chullah hoods, chajjas,troughs and similar items including edges for rough flat finished surface of concrete, complete all as specified and as directed.

Mild Steel TMT bars 5mm dia and over including 10mm dia in stirrups, spaces and binders etc over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Preparation of new plastered surfaces on walls and applying three coats of white wash complete all as specified and as directed.

Preparation of new plastered surfaces on walls and applying two coats of cement based paint over a coat of alkali resistance proming paint complete all as specified and as directed.

Shingle filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled, and blinded with earth and rammed including watering complete all as specified and as directed.

75 mm thick cement concrete 1:4:8 type D-2 as sub base to floor complete all as specified and as directed.

25mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in floor and finished even and fair complete all as specified and as directed.

10mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes complete all as specified and as directed.

Glazed ceramic tiles in vertical surface 300mm x 45mm x 7mm, 600mm x 300mm x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface complete all as specified and directed.

Applying bituminous primer on roof surfaces @ 0.40 liters/Sqm and applying one coat of semi hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm and thereafter supply and laying 3mm thick polymeric water proofing membrane, five layered, of weight not less than 3 Kg per Sqm with centre layer core of 90 micron high molecular density polyethylene film and bonded completely to the surface with overlap of 10 cms (overlaps to be thermo fused by flame) followed by another coat of semi hot blown bitumen 85/25 grade bitumen @ 0.70 Kg/Sqm and provide aluminium paint as per manufacturing instruction complete all as specified and as directed. Note:- Water proofing treatment will be done by IWL or through a specialized agancy.

50 mm thick cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in plinth protection laid in alternate bays (n exc 2 sqm each) area with 6mm wide joints and 10mm wide joints between the walls and plinth protection, finished even and smooth without using extra cement, outward slope of not less than 1:12, the joints shall be filled with mastic filling comprising one coat of bitumen 85/25 grade and three parts of sand by weight, complete all as specified and as directed.

Mild steel ventilators (Box type) factory made with top hung shutters and bottom fixed type shutters incl pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified and as directed. Note : (i) The window shall be fabricated as per Drg CEUZ/TD/1269/2008 Sh 1/3 (ii) Glazing, wire gauge shall be measured and paid separately.

Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe-290,Gde-E-165 quality A including one shop coat of zinc chromate primer paint including preparation of surfaces at contractor's workshop before fabrication complete all as specified and as directed.

4 mm thick glass sheet of frosted ordinary quality n exc 0.5 Sqm in each pane complete all as specified and as directed.

Preparation of newly steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

Pressed steel frames size 105mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete as specified supplied and fixed as in repair complete all as specified and as directed.

Factory made, 2nd class hard wood 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

Aluminum handles cast type, anodised, 150 mm size complete all as specified and as directed.

Aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt complete all as specified and as directed.

Supply Only Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and as directed.

Vitreous China wash basin (Pedestal), white, flat back, size 550 mm x 400 mm excluding tap, chain, plug and porcelain stopper but including brackets and cutting for and pinning in ends of brackets complete all as specified and as directed.

Brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified and as directed.

100mm dia cast iron sanitary connection pipe upto 300mm length complete all as specified and as directed.

Cast iron soil, waste and vent pipes (sand cast) 100mm bore in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and as directed.

Cast iron soil, waste and vent pipes (sand cast) 75mm bore in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and as directed.

Cast iron soil, waste and vent pipes (sand cast) 75mm bore in any length with or without ears with cement joints fixed to wall complete all as specified and as directed.

Cast iron soil, waste and vent pipes (sand cast) 50mm bore in any length with or without ears with cement joints fixed to wall complete all as specified and as directed.

Cast iron bend (any radius) diminishing pieces or tapers 100mm bore fitted with oval access door complete all as specified and as directed.

Cast iron bend (any radius) diminishing pieces or tapers 75mm bore fitted with oval access door complete all as specified and as directed.

50mm bore Cast iron cowls complete all as specified and as directed.

Cast iron floor trap 75 mm, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 complete all as specified and as directed.

Stack clamps made out of 50mm x 50mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm bore complete all as specified and as directed.

Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floor complete all as specified and as directed.

20mm dia, Ball brass, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and as directed.

20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

PVC waste pipe 32 mm bore with cup and washers complete all as specified and as directed.

Waste copling chromium plated 32 mm bore size full threaded with 80 mm height including all necessry washers "as in repair" complete all as specified and as directed.

Stop valve (concealed type), cast copper alloy fancy type, chromium plated with long shank and cup screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore complete all as specified and as directed.

Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

Shower roses 15 mm chromium plated with or without swivel joints, any size, including 125 mm long arm and fixing to steel pipe or union, complete all as specified and as directed.

PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundations, filling and mass concrete complete all as specified and as directed.

Brick work with sub-class 'B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:4 complete all as specified and as directed.

Cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in surface channels and drains including necessary formwork etc complete all as specified and as directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms moulds, mitered/stopped ends etc complete all as specified and as directed.

150 mm bore Salt-glazed stoneware drain pipes laid in trenches and jointed complete all as specified and as directed.

Cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in bed to 150 mm dia pipes including packing under, and haunching against the sides of pipes after they are laid and tested for complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel of 150mm internal dia of pipe (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished and reforming benching as required complete all as specified and as directed.

Providing Precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in manholes cover slab etc complete all as specified and as directed.

Providing cement concrete 1:2:4 type B-0 in steps, seismic and other similar bands, parapets and railings up to 60 cm in hieght, coping, kneelers apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles complete all as specified and as directed.

Mild steel TMT bars 6mm to 8mm dia cut to length bent to shape required including cranking bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and as directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed.

Demolition of plain Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Brickwork with subclass ‘B’ except bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth (without using extra cement) complete all as specified and as directed.

Material and labour for cement concrete type B-0, 1:2:4 (Using 12.5 mm graded crushed stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

S&F in repairs 6mm thick AC plain boards of size 1200mm x 1200mm panel fixed to GI grid of size 1205mm x 1205mm complete all as specified and as directed.

Rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides fixed with angle cleats or other connecting plates conforming Fe-410-W (Gde-E-250) quality-A complete all as specified and as directed.

Mild steel work as in wind ties and holdfast including all necessary drilling, bolting and similar work confirming to Fe-410-0 or Fe-310-0 complete all as specified and as directed.

Mild steel, plain, black sheet 1.60 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.

Complete removal of existing treatment on steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power) complete fitting such as switch, sockets, ceiling rose, pendants socket any type, rectangular board terminal boxes etc and making good disturbed surfaces of walls floors and ceiling complete all as specified and as directed.

Point wiring for one light /fan/ Bell point controlled by one switch with 1.5 sqmm PVC insulated FRLS unsheathed copper conductor single core multi stranded flexible copper cable 1100V grade in and including not less than 2.00 mm thick and 20 mm dia Concealed PVC Conduit ( ISI marked ) and 1.25 mm thick mild steel terminal boxes (Modular Type) concealed in walls for fixing of modular switches/sockets/ regulator etc along with PVC insulated and unsheathed FRLS 1.5sqmm multi stranded copper conductor cable (green color) as earth lead, & connected to common earth and earthdolly, making good the disturbed surface to match with the existing specification complete all as specified and as directed. Make : Havells/Finolex/Polycab/Gloster

All as per Item No.225 but for 3 pin 5 Amp Socket outlets point controlled by one modular switch 6A piano type on Same board with 1.5sqmm size of copper cable complete all as specified and as directed.

All as per Item No.225 but for 3 pin 5 Amp Socket outlets point controlled by one modular switch 6A piano Type on Independent board with 1.5sqmm size of copper cable complete all as specified and as directed.

All as per Ser Item No.225 here-in-before but for one 3 pin 15A socket outlet on independent Board with PVC insulated unsheathed FRLS cable 4 sqmm copper multistrand conductor, along with PVC insulated and unsheathed FRLS 2.5 Sqmm multistrand copper conductor earth wire connected to common earth and earth dolly complete all as specified and as directed.

All as per Srl item No 225 but for one sheet metal enclosure single pole & neutral concealed on wall independent with PVC insulated, unsheathed FRLS cable 4.0 sqmm copper multistrand condutor, alongwith PVC insulated and unsheathed FRLS cable 2.5 sqmm multi stranded copper conductor earth wire connected to common earth and earth dolly including making good the disturbed surfaces complete all as specified and as directed. Make - KEI/Finolex/ polycab.

All as per srl item No 225 but for 3 pin 5 Amps socket outlet independent including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly complete all as specified and as directed.

Modular switch 6 Amps single pole one way 230 volt with outer strip complete all as specified and as directed. Make : Havells (Crabtree)/Legrand/Philips

S&F in repair socket combination 5 Amps 2-in-1, 5 Pin flush type(Modular Type), 230 volts complete all as specified and as directed. (Make: Havells (Crabtree)/ Legrand/ Philips

Modular socket combined 2-in-1, 6 Pin 6 & 16 Amps flush type with outer strip complete all as specified and as directed. Make : Havells (Crabtree)/Legrand/Philips

Modular switch 16 Amps single pole one way 230 volt with outer strip complete all as specified and as directed. Make : Havells (Crabtree/Legrand/Philips)

Ceiling rose surface bakelite 3 terminals as in repairs complete all as specified and as directed.

Call bell ding-dong 230 volts including taking down old one complete all as specified and as directed.

Bell Push, 6 amp, 230 Volts , 1 Modular type complete all as specified and as directed.

Supply and fixing exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers along with all electrical wire connection and including taking down old exhaust fan and deposited to MES Store complete all as specified and as directed. Make:Havells/Bajaj/CG

Supply and fixing exhaust fan, PVC body AC single Phase. 230V of size 250mm sweep with louvers along with all electrical wire connection and including taking down old exhaust fan and deposited to MES Store complete all as specified and as directed. Make:Havells/Bajaj/CG

Supply and fixing ceiling fan, AC single Phase. 230V of size 1200mm sweep with, blades, and frame along with all electrical wire connection and including taking down old ceiling fan and deposited to MES Store complete all as specified and as directed. Make :Havells/Bajaj/CG

Supply and fixing Wall fan, AC single Phase. 230V of size 450mm sweep with, blades, and frame along with all electrical wire connection complete all as specified and as directed. Make:HPL/Havells/Bajaj/CG

S&F in repairs LED tube light fitting Garnet 20W Batten LED, Housing made of extruded AL with lumen O/P should not be less than 100 lum/watt making all connection using flexible cable of suitable size from ceiling rose to fitting including taking down old one complete all as specified and as directed. Make- HPL/Wipro/C&S/ Havells

S&F in repairs LED tube light fitting Garnet 10W Batten LED, Housing made of extruded AL with lumen O/P should not be less than 100 lum/watt making all connection with suitable size flexible cable from ceiling rose to fitting including taking down old one complete all as specified and as directed. Make- HPL/Wipro/C&S/ Havells

Venza decorative wall mounting light fitting, SS finish fixture with opal glass diffuser including 12W retrofit LED bulb and making all connection using flexible cable of suitable size from ceiling rose to fitting including taking down old one complete all as specified and as directed. Make- Havells Or Equivalent make in Wipro /HPL

LED 15 Watt Surface Mounting fitting round/square type, Housing made of extruded PC with lumen O/P should not be less than 100 lum/watt making all connection using flexible cable of suitable size from ceiling rose to fitting including taking down old one complete all as specified and as directed. Make- Wipro/HPL/ C&S/Havells

Supply and fixing electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection piece etc complete all as specified and as directed. Make : Havells/Bajaj/CG

S&F in replacement Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 12 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and as directed. (Note-MCBs will be measured separately)

S&F in replacement MCB Single Pole, 230 Volt, rating 6 to 32 Amps, C Curve. complete all as specified and as directed. Make : HPL/Indoasian/Havells

S&F in replacement MCB Single Pole & Neutral, 230 Volt, rating 6-40A, C Curve complete all as specified and as directed. Make:HPL/Indoasian/Havells

MCB TPN 415 volts, 10 KA, 4 Pole 40 Amps, curve complete all as specified and as directed. Make : HPL/Indoasian/Havells

VTPN MCCB DB Double Door (Including 63 Amp MCCB) 16 KA (as Incommer) 4 way double door complete with appropriate size bus bar, neutral link and Earth Bar fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and as directed. Make- Indoasian/Legrand/Havells

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 4.0 Sq mm as earth lead complete all as specified and as directed. Including taking down old sub main wire.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 4 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 2.5Sq mm as earth lead complete all as specified and as directed. (For AC point)

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 4 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 2.5Sq mm as earth lead complete all as specified and as directed. (For Geyser power point)

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 2.5Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 1.5 Sq mm as earth lead complete all as specified and as directed. (For bldg security light)

S&F in replacement of Sheet metal enclouser single pole and neutral with 2 pin and earth plug and socket 20A 240V complete with one double pole MCB capacity 25 Amp, C Curve, 10KA complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.30 mm thick buried directly in ground (earth pit not less than 2.25 Mtrs below normal ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead 4 mm dia by means of bolts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 5 of relevant SSR connected to earthing test point all as specified and indicated and testing on completion including excavation earth work drilling holes for electrode PCC pit & cover, funnel, water pipe lugs GI pipe medium grade protection pipe for earth lead up to DBs complete all as specified and as directed.

S&F in repalcement of LED street Light fitting 30 Watt, New generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 with acrylic, with Heat resistant toughened Glass, Corrosion resistant, complete making all connection with MCB SPN alongwith MCB Box enclosure, complete all as specified and as directed. Make- Havells Cat part No- ENDURAPEARLSL30W LED757SASYTOPCMP (ENDURA PEARL 30W MP)

Street light Bracket complete made of GI pipe of suitable size of 25 mm dia, medium grade 1.2 m long bent to shape as per site requirement along with MS flat iron clamps with nuts, bolts, washers including grouting the same with wall,including taking out old bracket complete all as specified and as directed.

Supply & Laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with "XLPE" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 25 Sqmm x 4 core size including taking out old unsv UG cable any type/size complete all as specified and as directed.

Dry sand for sand cushioning to under ground cable 8 cms thick before laying the cable before and 15 cms thick after laying & streching the cable in trenches, including hand punning and consolidating complete all as specified and as directed. Note : for payment purpose punned thickness shall be measured

Bricks sub class 'B' brick laid dry, flat with width equal to length of brick as cover laid over the cabel to give mechanical protection to underground cabels complete all as specified and as directed.

Supply and fixing GI tubing light grade 40 mm dia along the wall/ in trenches/ in duct / in culvert /road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles complete all as specified and as directed.

Switch piano flush type 5 Amps single pole one way complete all as specified and as directed.

Switch socket combination 2-in-3 pin 5 Amps flush type complete all as specified and as directed.

Ceiling rose, surface bakelite 65mm x 50mm two to three terminals fixed on PVC Round Block complete all as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers along with all electrical wire connection and including taking down old exhaust fan and deposited to MES Store complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

LED light fitting 1x9W/1x10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and as directed. (Note-MCBs will be measured separately)

S&F in replacement MCB Single Pole, 230 Volt, Rating 10 to 40 Amps complete all as specified and as directed. Make: Legrand/ C&S / Anchor.

S&F in replacement MCB Single Pole and Neutral , 230 Volt, Rating 63 Amps complete all as specified and as directed. Make: Legrand/ C&S / Anchor.

Supply & Laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with "XLPE" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 10 Sqmm x 2 core size including taking out old unsv UG cable any type/size complete all as specified and as directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed.

JINDAL BUILDERS

ASHOK KUMAR PURI

SINGH CONST CO

VIRINDER SINGH

RAJ MOHD

VISHWANATH AND SONS

M/S ASHOK KUMAR PACHIALA

AKBAR FURNITURE HOUSE AND TIMBER MERCHANT

RAMAN CONSTRUCTION CO