Annual Rate Contract for construction and commissioning of Hand Pumps By various Rig Machine under Sub Division Chohtan,Dhanau and Fagaliya

PHED BSR 2023 Revised

Construction of tube well from ground level & up to 100 mtr depth to accommodate housing and assembly pipe of following sizes in all type of alluvium strata unconsolidated formation such as pebbles, boulders etc. by percussion/rotary drilling method as per IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended upto date) and technical specifications, with gravel as per IS:4097-1967 and it's packing as per IS: 2800 (Part I & II) 1979 as amended up to date (the work includes the cost of gravel & it's primary packing and packing during development, lowering of housing & strainer assembly pipes with supply and wrapping of coir-rope, wherever necessary for arresting fine sand particles and development work, but excluding the cost of housing and strainer pipe assembly). The work would be completed after obtaining sand free water. Nominal bore 125 mm dia.

Add 15% extra on above item for drilling depth beyond 100 mtr, If depth of bore is more than 100 mtr.

Construction of Tube Well up to 100 mtr. depth in all type of rocks by DTH system & over burden to accommodate casing pipe of following sizes in all types of soils & over burden including lowering of casing pipes, (if required) excluding cost of casing pipes, as per IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended upto date) and technical specifications. The work would be completed after obtaining sand free water. The tube well should have a through out bore as per nominal dia of casing pipe. Nominal bore 100 mm dia.

Nominal bore 125 mm dia.

Add 15% extra on above item for drilling depth beyond 100 mtr, If depth of bore is more than 100 mtr.

Nominal bore 125 mm dia.

Construction of tube well from ground level and upto 100 mtr. depth and above of following sizes in all types of soils in alluvium strata, unconsolidated formation such as pebbles, boulders etc. by "bailing" method and without gravel packing as per IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended upto date) and technical specifications. The work includes formation of cavity at bottom by development with appropriate air compressor or bailer pumping and also lowering of casing pipe but excluding cost of the casing pipe. The tube well should have a throughout bore as per nominal dia of casing pipe. The work would be completed after obtaining sand free water. Nominal bore 100 mm dia.

Nominal bore 125 mm dia.

Supply of ERW M.S. black casing pipe ISI marked {IS:1239(Part-1:2004)} medium of following sizes at site of work. 100 mm dia NB( Thickness of pipe 4.8 mm & mass of tube 16.40 Kg/m)

Supply of ERW M.S. black casing pipe ISI marked {IS:1239(Part-1:2004)} medium of following sizes at site of work. 125 mm dia NB( Thickness of pipe 4.8 mm & mass of tube 16.40 Kg/m)

Providing and Lowering of ISI mark Medium well PVC-U casing and screen pipe (CM) as per IS : 12818 : 2010 or amended upto date having pipe thickness as per IS code suitable for bore well with threading , winding with superior quality of plastic mesh & rope in three layers with end cap complete as per technical specification and direction of Engineer In charge. 100 mm nominal dia ( internal dia ).

Providing and Lowering of ISI mark Medium well PVC-U casing and screen pipe (CM) as per IS : 12818 : 2010 or amended upto date having pipe thickness as per IS code suitable for bore well with threading , winding with superior quality of plastic mesh & rope in three layers with end cap complete as per technical specification and direction of Engineer In charge. 125 mm nominal dia ( internal dia ).

Labour charges for making slots on blank pipes made of ERW MS black pipe ISI marked of following sizes, the slotting should be as per IS:8110-1985. 100 mm dia nominal bore

Labour charges for making slots on blank pipes made of ERW MS black pipe ISI marked of following sizes, the slotting should be as per IS:8110-1985. 125 mm dia nominal bore

Supply & installation of GI pipe 32 mm medium class “B” with pipe sockets (heavy duty).

Supply and installation of ISI marked India Mark II Hand pump set complete with cylinder & 15 connecting rods.

Supply and installation of ISI Marked India Mark II Hand pump set Extra-Deep (EDW) complete with cylinder and connecting rods. EDWHP + 20 Connecting rod.

EDWHP + 23 Connecting rod + 1 Weight.

EDWHP + 26 Connecting rod + 2 Weight.

EDWHP + 30 Connecting rod + 3 Weight.

Supply and installation of ISI mark connecting rod as per departmental specifications. of 3 meter length.

Installation of India Mark II/III E.D. I & II hand pump set complete on existing platform.

Supply of ISI mark AC pressure pipe class 15 manufactured by MAZZA process as per IS:1592-2003 or amended up to date, for casing of tube well for following dia nominal bore, with jointing material PVC coupler as per technical specification and direction of Engineer In charge. 125 mm nominal dia

Making slots of hole size and Nos. as directed by EIC in AC pressure pipe Class 15 as per technical specification for using slotted pipe in TW casing.

Construction of 185 cm. dia platform as per approved design & drawing of UNICEF.

Please Enable Macros to View BoQ information