TNO.49/EDC2MT/2025-26

Amount

Carriage of following material from store center to site of work including loading & unloading at both ends maximum distance up to 60 Km. :-

PCC Pole 11 Mtr. Long

PCC Pole 8.5 mtr long

ACSR Weasal Conductor

11 KV Pin Insulator with pin

11 KV Disc Insulator with fitting

LT AB Cable of size 3x120 sq.mm

LT PVC Cable of size 1x240 sq.mm

LT PVC Cable of size 3.5x150 sq.mm

250 KVA T/F 11/0.4V

100 KVA T/F 11/0.4V

11 KV Fuse set

Stay set

Earthing rod with GI wire (5 Mtr. Each)

LT Distribution Box

11 KV TPMO

GI Wire 6 SWG

Errection PCC Pole 11 mtr long/PCC pole 8.5 mtr long after digging a pit of size 1.6 mtr deep in all type of Soil including grouting ratio (1:4:8) of the pole with proper ramming after completion of work. (as per UPPCL Respo)

Errection of Double PCC Pole 11 mtr long/PCC pole 8.5 mtr long after digging a pit of size 1.20x0.60x1.6 mtr in all type of Soil for each pole including grouting ratio (1:4:8) of the pole with proper ramming after completion of work. (as per UPPCL Respo)

Laying, lifting sagging of LT AB Cable of size 3x120. (as per UPPCL Respo)

Laying of ACSR Weasal Conductor for jumpering. (as per UPPCL Respo)

Fixing of LT PVC Cable of size 1x240 & 3.5x150 sq.mm. with complete work (as per UPPCL Respo)

Fixing of Stay rod complete (as per UPPCL Respo)

Fixing of MS Earthing of each 11 KV line and pole after drive of electrodes if size 20mm x 250 mm and connection the earthing point with GI wire. (as per UPPCL Respo)

Fixing of 11 KV Pin Insulator with pin (as per UPPCL Respo)

Fixing of 11 KV Disc Insulator with fitting (as per UPPCL Respo)

Making of New 250 KVA T/F Plinth of size 6'x6'x3' (feet) (as per UPPCL Respo)

New Wiremesh Fencing of 250 KVA T/F with saprate gate and grouting of legs

Water level earthing of 250 KVA T/F (as per UPPCL Respo)

Safe placing of 250 KVA T/f on newly constructed plinth alongwith connection properly and proper jumpering of HT side and fixing of cable on LT side of T/f

Mounting of 100 KVA T/f with proper jumpering of HT side and fixing of cable on LT side of T/f on double pole. (As per direction of Supervising Engineer)

Fixing of 11 KV Fuse Set. (as per UPPCL Respo)

Fixing of 11 KV TPMO (as per UPPCL Respo)

Fixing of GI Wire for Earthing Road (as per UPPCL Respo)

Fixing of LT Distribution box (as per UPPCL Respo)

Providing and fixing of LT Fuse Box with fuse wire of appropriate size (as per UPPCL Respo)

Providing and Fixing of Alum. Leg long barrel of various size (as per UPPCL Respo)

Providing and Fixing of Lead for connection of LT Distribution box (as per UPPCL Respo)

Providing and fixing of Stone Pad (as per UPPCL Respo)

Providing and fixing of Double circuit Tailless Unit (as per UPPCL Respo)

Providing and fixing of Danger Board with barbed wire including jumper (as per UPPCL Respo)

Providing and fixing of Copper L-piece 50x225x10mm (LS) (as per UPPCL Respo)

Providing and fixing of Copper L-piece 62x225x12mm (LS) (as per UPPCL Respo)

Grouting of Stay set (as per UPPCL Respo)

Grouting of poles (as per UPPCL Respo)

Providing and Fixing of MS Angle 65x65x6 sq.mm (as per UPPCL Respo)

Providing and Fixing of MS Nut and Bolts. (as per UPPCL Respo)

Providing and Fixing of various size of LT & 11 KV Clamps with nut and bolt (as per UPPCL Respo)

Providing and Fixing of Dropper Channel. (as per UPPCL Respo)

Providing and Fixing of Top channel. (as per UPPCL Respo)

Providing and Fixing of LT Piercing connector of various size (as per UPPCL Respo)

Back Cartage of 100 KVA T/f (old & used) site to store centre meerut

Back Cartage of 160 KVA T/f (old & used) site to store centre meerut

Providing and Fixing of T-off channel. (as per UPPCL Respo)

M/S ABID CONTRACTOR (BID ID -5535311)