SPECIAL REPAIR TO CERTAIN SMQS IN VIMAN NAGAR AT AFS PUNE AND ADD/ALT TO CERTAIN BUILDINGS IN VIMAN NAGAR AT AFS PUNE UNDER GE AF LOHEGAON

Amount

Taking down existing water proofing treatment by Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, scrubbing down with water etc. complete all as specified and directed.

M&L for 10 mm thick rendering on fair faces of brick works on wall / Concrete surfaces finished even and smooth without using extra cement in cement mortar 1: 4 complete all as specified and as directed ( With using WPC of 3% of Cement Weight. Note:-WPC shall be measured and paid seperately.

Preparation of surface and applying two coats of tack coat bituminous primer to concrete surfaces at the rate of 1.2 kg. per sq. m per coat complete all as specified & directed.

M & L for roof treatment using APP based polymeric membrane, minimum weighing 3 kg / sqm and minimum 3 mm thick, reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application with side over lap 75 mm and end lap minimum 100 mm and sealing over lap and joints as per manufacturer's instructions complete all as specified and directed.

Supply only integral waterproofing compound.

M&L 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded stone aggregate) as in roof for levelling course finished even and fair without using extra cement complete all as directed by Engr-in-charge.

M & L for two coats of aluminium paint above the new untreated APP membrane complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal 15mm dia

S&F for GI tubing 15mm dia medium grade with all fittings & fixed complete to walls & ceiling or laid in floors.

Re-fixing old steel tubing and connections ,galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors of 15 mm bore in new or old position complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal 20mm dia

S&F for GI tubing 20mm dia medium grade with all fittings & fixtures complete laid in trenches fixed in repairs

Refixing old steel tubing and connections ,galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors of 20 mm bore in new or old position complete all as specified and directed.

S&F in repair vitreous china, squatting pan of 'Orissa' pattern, long pan, size 580 mm x 440 mm, white, with 'P' of 'S' Trap, front or back inlet and foot rests any pattern, including concrete bedding complete all as specified and as directed.

S&F in repair 15 mm dia CP brass PVC connection 60 cm long including check nuts etc complete all as specified and directed

M&L in repair for 15 mm bore bib tap chromium plated cast copper alloy with wall flange complete all as specified and directed

S & F in repair PVC low level flushing system plastic valve with inlet ball valve float chain and ball (of capacity 10 liters) ISI Marked incl 32mm PVC flush pipe complete all as specified and directed

S&F in repair vitreous china wash hand basin, white, 550 mm x 400 mm flat back, including providing CI brackets, fancy type CP Pillar Tap, PVC waste pipe 32mm dia, chromium plated, brass, waste coupling, iincl 32 mm dia all as specified and as directed.

S & F in repair angle valves fancy , cast copper alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S &F in repair Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed.

S &F in repair 15mm dia stop valves cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed (concealed type) all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S&F 100mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls all as specified and directed.

S&F 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls all as specified and directed.

M&L in repair for PVC (SWR) bends of any radius with oval and access door of 100mm dia

M&L in repair for PVC (SWR) bends of any radius with oval and access door of 75mm dia

S&F in repair pvc SWR floor trap of diameter of outlet 75mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4).

Supply and fix in repair waste coupling of PTMT (full threaded) (minimum weight 32mm - 45 gms) suitable for wash hand basin complete all as specified

Supply and fix in repair waste coupling of PTMT (full threaded) (minimum weight 40mm-60 gms)) suitable for sink complete all as specified

S & F in repair Grating doom 100mm dia of Stainless steel with holes for waste pipes all as specified and directed.

S & F in repair Grating doom 100mm dia of stainless steel all as specified and directed.

Taking down chowkat with shutter without taking out shutter from the frame n.exc 1.5 Sqm.

Taking down shutter of any description but exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed.

Taking down chowkat with shutter without taking out shutter from the frame exc 1.5 Sqm n.exc 4 Sqm each

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as directed .

Supply and fix for solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick plain colour PVC sheet, reinforced with mild steel square tube complete all as specified and as directed.

S&F 150 mm long, aluinium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S & F 100 mm size Butt hinges, medium weight, cold rolled mild steel, and fixed all as specified and directed.

S F Butt hinges, extruded aluminium alloy with galvanised 100 mm long mild steel hinge pin, anodised and fixed, type B-21

S&F 150 mm size handles, Extruded aluminium alloy handles, abricated type, anodised complete all as specified and as directed.

S&F 300 mm long MS sliding door bolt, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

S & F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length 150 mm fixed in floor complete all as specified and as directed .

S & F for 300 mm, MS ordinary rat tail rod pattern Helical door springs including roller and roller plate complete all as specified and directed.

M & L for Factory made of 35 mm thick glazed and skeleton shutters made of 2nd class hard wood, open rebated and prepared to receive glass gauge edges of framing plain chamfered or rounded , fitted with cut and mitred beads for securing glass etc for window, ventilator shutters, etc. as specified in SSR Part I, Section 8 clause 8.24(b) and fitted to chowkhat complete all as specified and directed .

M & L for Factory made of 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides: supplied and fitted to chowkats complete all as specified and directed .

S&F Stainless steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S&F in repair 3.0 mm thick plain sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq mtr in each pane complete all as specified and as directed.

S & F in repair Harrison rail 20 mm Dia(Curtain rod)s, of anodised aluminium alloy, chromium plated all as specified and directed.

S & F Fancy type CP brackets for curtain rods with 1mm thick plate complete all as specified and directed.

Preparation of new surfaces of wood and wood based surfaces and applying two coat of synthetic enamel paint over one coar of pink primer of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

S & F in repair ms Mortice lock, vertical type, size 100 mm, long 4 levers with handles as in repairs complete all as specified and directed.

S & F in repairs for 300 mm, ordinary rat tail rod pattern Helical door springs including roller and roller plate complete all as specified and directed.

S & F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair galvanised steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S & F in repairs for butt hinges medium weight cold rolled mild steel of 100 mm size. complete all as specified and directed .

S & F in repairs for 150 mm extruded Aluminium aloy handles, febricated type anodised complete all as specified and directed .

S & F in repairs for 150 mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and directed .

S & F in repairs for 250 mm Sliding door bolt aluminium alloy, anodised, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S & F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length 150 mm fixed in floor complete all as specified and as directed .

S &F in repair of 125mm Hasp and staple, safety type, Aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed.

M/L for 18 MM thick Block boards, grade 2 quality, i n t e r i o r grade, commercial type, fixed with screws to timber and nails for storage almirah to the sizeand as directed by Engr-in-charge.

M/L for 12mm thick plywood BWR grade type BB fixed with fevicol and nails for working table / storage almirah to the size and as directed by Engr-in-charge.

Taking down cement plaster on brick/stone/concrete surface including wall tiling and hacking out joints hacking for key scrubbing down with water etc complete

M & L for 5mm thick cement plaster in CM 1:3 on ceiling and finishing the surface even and smooth (without using extra cement) etc.

M & L for 10mm thick cement plaster in CM 1:6 on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc.

M & L for preperation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

- ditto - all as per item No. 65 above but on walls.

M & L for newly plastered surfaces Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work over a coat of alkali resistant primer including making good the surface complete all as specified and directed.

M & L for preparation of old decorated surfaces of walls plastered or unplastered incl removing cornices, pilasters by brooming down to remove all dust, dirt and all loose scales and other foreign matter and smoke soot, moulds, moss and efflorescent salt, oil & grease spots by steel wire brushes or steel scrapers, etc and applying two coat of white wash to walls to obtain uniform surface including making good the surface complete all as specified and directed.

- ditto - all as per item No.68 above but on ceilings complete all as specified and directed.

M & L for complete removal of existing treatment of walls plastered or unplastered, Washing, rubbing down and two coat of DISTEMPERING WITH 1ST QUALITY acrylic distemper (over a coat of alkali resistant primer) having VOC content less than 50 gm per ltr of approved manufacturere if reqd shed of colour complete as per manufactures specifications, all as specified and directed.

M & L for Preparation of old surfaces of wood and wood based surfaces and applying one coat of synthetic enamel paint of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

M & L for Preparation of old painted surfaces of steel and applying one coat of synthetic enamel paint to steel surfaces of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

-dito- as per ser No 72 but two coat of synthetic enamel paint on steel surface

M&L for 3mm thick wall care putty on wall all as specified and directed by Engr in Charge.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise not otherwise specifically provided for

M&L for 75mm thick PCC in (1:2:4) type B1 using 20mm graded stone agg as in sunken floor complete all as specified and as directed

M&L for PCC 1:5:10 type E2 using 40mm graded aggregate as in foundations, filling and mass concrete complete all as directed

M&L for PCC 1:1½ : 3 or Bitumastic Gola with 80/25 bitumen and coarse sand mixer 1:3 by weight 8cm x8cm at the junction of roofing to vertical surface as in sunken or similar work complete all as directed

M&L for Bitumen blown 80/25 applied hot, two coats to concrete bedding surface @ 1.5Kg/Sqm per coat as in sunken floor complete all as directed

M&L for polythene flim black 50 micron laid in sunken floor complete all as directed

M&L for spout of 50mm bore GI pipe and projection 450mm clear from outer wall in any length or description with rubber ring joints and fixed in sunken floor etc for drain out logging as in sunken floor etc or similar work complete all as specified and as directed

M&L for 25mm thick PCC 1:2:4 type B0 using 12.5mm graded stone agg as in sunken floor mixed with water proofing comound finished fair and even complete all as specified and as directed (Note:- WPC shall be measured and paid separately)

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L cement concrete type B0 1:2:4 (12.5 mm graded agg) 25mm thick as in sub floors complete all as specified and directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15 mm thick screed bed in CM (1: 6) complete all specified and directed.

M&L for jointfree non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm in floors {Superior/Premium quality}, set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile over and including 15 mm thick screed bed in CM (1: 6) complete all specified and directed.

M&L for joint free Glazed Ceramic Coloured Tiles, 450X300X7mm thick in size, set on Vertical Surfaces such as Skirting, Dado, etc,over and including 10mm thick rendering in cement mortar 1:4 Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and as directed.

M&L granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in CM (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and as directed.

Labour only for rounding to edge of stone slabs one edge,such as in steps, cooking platform,and other similar situations complete all as specified and directed.

Cutting chases pinning in making good to facing where required for concealed water tubing and making good cutting not exc 10 cm girth in stone/concrete walls complete all as specified and directed by Engr-in-Charge.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, waste pipe and coupling and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and directed.

S &F 110mm dia of PVC (SWR) junction single T equal or unequal all with acess door as specified and directed.

M&L for PVC (SWR) vent cowl of 110mm dia

S & F 3mm thick figured glass ordinary quality and glazing with oil putty in square not exc. 0.5 sqm in each pane complete all as specified and directed.

S &F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified and directed.

S &F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded all as specified and directed.

Demolition of stone / block masonry built in CM 1:4

M&L for precast solid cement concrete block masonry exc 10cm in width built with solid blocks Grade C1 (1:3:6 mix) and set in CM (1:6).

M&L for RCC 1:2:4 (type B0) using 12.5mm graded stone aggregate as in Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L for flat formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelve including sup- ports, overhangs, etc. also splays between floors and beams, etc.of rough finished of concrete complete all as specified & directed

Preparation of new or previously un-treated surfaces of steel and applying two coat of synthetic enamel paint to steel surfaces over one coat of red oxide of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

Forming jambs etc, to opering ( to foregoing items), incl cutting toothing and properly bonding into work, also facing jointing and pointing to match existing work in CM (1:4) complete all as specified and direted.

Smruti Construction

M/S SANDEEP CONSTRUCTION COMPANY

BSK Construction

R k construction