ADDN / ALTN TO TRAINING EXAMINATION ROOMS IN OLD TRAINING

Amount

Demolition of Cement concrete in below or above ground level and paving not exc 15 cm thickness as in flooring all as specified and directed.

M&L 25 mm thick cement concrete type B-1,1:2:4 (20 mm graded aggregate) as in sub base of floors / roof with using extra cement all as specified.

M&L for Screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes all as specified and directed.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as spcified and directed.

Dismantling wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as specified and directed

M & L Rendering in CM 1:6, 10mm thick on fair faces of brick work or concrete surfaces and finished even & smooth without using extra cement all as specified and directed

All as per Item No: 04 but as in Skirting

M&L for complete removal of existing treatment of wall, apply 3 mm thick wall care putty, one coat of (chalk whiting) primer and two coats of oil bound distemper all as specified and directed .

M& L Preparation of old plastered wall surface and applying two coats of white wash all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water, etc all as specified and directed.

M&L rendering in CM 1:4 , 10 mm thick as for backing coat plastering all as specified and directed.

M&L Preparation of newly plastered wall surface and applying two coats of distemper with 3 mm thick wall care putty including priming surface and all as specified and directed.

M&L for complete removal of existing treatement of wall surface applying two coats of cement base paint inlcuding one coat of chalk whiting primer all as specified and directed

Taking down chowkhats or frames (with out taking off the shutters from the frames) size exc 1.50 sqm and not exc 4.00 sqm each and all as specified and directed.

Material and labour for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put togather with glue pinned at joints all as specified and as directed.

S & F Factory made second class hard wood (rail and style) plain framed panelled shutters 35 mm thick (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of the rail and style shall be as per IS 1003 (Part I) kiln seasoned and chemically pressure treated.

S & F 100 mm size Butt hinges medium weight cold rolled mild steel.

S & F 200 mm size Aluminium anodised barrel tower bolts extruded section.

S&F 150 mm size Extruded aluminium alloy handles fabricated type anodised.

S & F 300 mm long Aluminium alloy anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy .

M&L for Preparation of new wood or wood based surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

Dismantling ceiling boards any description, any thickness including cover fillets all as directed.

Supply and fix anodised aluminium snap grid of size 605mm x 605mm frame work for false ceiling all as specified and as directed.

Providing and fixing Gypsum Board 8 to 9mm thick in ceiling fixed with screw as per manufacturers instructions. Make Arm strong, Saint Gobain

Material and labour for hangars 6 mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

Removing building material out side the campus including loading and unloading etc., to a distance exc 5.0 Km but not exc 10.0 Km out side the MD land ( Ministry of Defence) where responsibility regarding place of deposition and permission from all authorities etc., in this regard will be of contractor and all as specified. Note : Location and Permission of deposting the disposal out side the MD land shall be rest with contractor at his own arrangement.

Taking up or down steel tubing and connections, including cleaning or removal to store 15mm bore all as specified and as directed.

All as per Item No: 27 but for 20 mm bore all as specified and as directed.

Taking down 75 /110 mm dia . old PVC (SWR) pipes fixed on walls all as specified and as directed.

M &L for Non-skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface all as specified and as directed.

M&L for Glazed coloured ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick backing coat in CM 1:4 all as specified and as directed.

S&F grating doom 125 mm dia with waste hole of PTMT (minimum weight 40 gms) all as specified and as directed.

Supply and fix in repairs 15mm dia bib tap, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe all as specified and as directed.

Supply and fix in repairs15mm dia stop valves, cast copper alloy, fancy type chromium plated with long shank and cub (concealed type) high pressure with crutch or butterfly handle, screwed down, screwed for iron pipe all as specified and as directed.

Supply and fix in repairs 15mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe all as specified and as directed.

Supply and fix in repairs low level PVC flushing cistern white complete with syphonic action type 10 litre capacity including float valve handle, bracket, PVC flush down pipe 32mm dia as required with bend, PVC connection 450mm long with PTMT nut and washers etc complete all as specified and as directed.

Supply and fix vitreous china wash down water closet pan (pedestal pattern), excluding flushing cistern and flush pipe), including fixing to existing 125/110mm size PVC (SWR) P trap etc complete all as specified and as directed.

Supply and fix plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated hingeing device all as specified and as directed.

Supply and fix in repairs stainless steel, tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed with chromium plated brass screws all as specified and as directed.

PVC connections 15 mm size with PTMT nuts of length 450 mm all as specified and as directed.

S&F in repairs Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe)

S&F in repairs Viterous china wash hand basin white flat back size 630 x 450 mm excluding taps, waste , chain and plug and porcelain stopper but including brackets etc all as specified

S& F steel tubing medium grade with all fitting and fixtures complete to walls and or laid in floors 15mm bore all as specified and as directed.

S& F steel tubing medium grade with all fitting and fixtures complete to walls and or laid in floors 20 mm bore all as specified and as directed.

S & F PVC (SWR) pipes single sockted in any length with rubber ring joints laid fixed to walls 110 mm bore all as specified and as directed.

S & F PVC (SWR) pipes single sockted in any length with rubber ring joints laid fixed to walls 75 mm bore all as specified and as directed.

PVC (SWR) bends any radius 110 mm bore all as specified and as directed.

PVC (SWR) bends any radius 75 mm bore all as specified and as directed.

S & F brasschromium plated health faucet with hand held and spring operated control valve with PVC flexible pipe connection of suitable length as directed fixed to 15 mm bore pipe. Make : Jaquar Model No: ALD-CHR- 585 or equivalent in Dolphin/ Zoloto

Preparation of old steel surface over 10 cm in width or girth and applying one coat of synthetic enamel paint.

M & L for Preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed.

Taking down chowkhats or frames with shutter (with out taking off shutters from the frames) size not exc 1.50 sqm each and all as specified and directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube. A minimum of 6Nos screws to be provided for each frame all as specified and as shown in SSR part II drawing on page No. 160 and as directed. Note: The quoted rates are deemed to be included for cutting holes, providing concrete for hold fast and making good to the disturbed surfaces.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as specified, shown in SSR part II drawing and as directed.

Disconnecting existing tanks exc 250 & n.exc 500 ltrs setting aside(or lowering if required) for repairs cleanig etc and hoisting if required reconnecting & refixing in position

S&F in repairs 20 mm Gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed

M&L for Dismantling loose/disintegrated portion of RCC Chajjas, bands, shelves, beams and similar works including provison of supports if required and dubbing with PCC (1 : 1.5 : 3) using 6 to 12mm thick graded stone aggregate in any position, thickness of 15mm to 25 mm thick and finished with cement mortar 1:2 mixed with and including of water proofing compound all as specified and as directed.

M&L for Dismantling loose/disintegrated portion of RCC Chajjas, bands, shelves, beams and similar works including provison of supports if required and dubbing with PCC (1 : 1.5 : 3) using 6 to 12mm thick graded stone aggregate in any position, thickness of 25mm to 50mm thick and finished with cement mortar 1:2 mixed with and including of water proofing compound all as specified and as directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quions,arches,pillars,etc.but excluding ashlar fancings, dressed stone work and precast concrete articles all as specified and directed.

M & L for Brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 with old size bricks.

M&L for Rendering in CM 1 :4, 15 mm thick on fair faces of brick or concrete surfaces of wall finished even and smooth without using extra cement .

M&L for Preparation of new surfaces of walls and applying two coats of cement base paint on walls including one coat of primer.

Taking down aluminium point wiring (light, fan socket or power) complete, including fixture and fittings such as switches,ceiling rose, pendents, regulators,sockets, light fittings etc.removing materials for keeping for taking credit( credit for above items should be made as per conditions separately) and making good disturbed surface of walls floors etc. all as specified.

Taking down old unserviceable submain wiring of any size including GI/copper earth continuity conductor in PVC conduit on wall/roof and making good to disturbed surfaces all as directed.

Taking down Ceiling fan, sealing cable end, dismantling blades from fan and keeping in safe custody for reuse at site and making good disturbed surfaces complete all as specified and as directed.

Refixing only ceiling fan and connecting up including provision of cable from celling rose/ connector to fan all as specified and as directed.

M&L painting of ceiling fans complete, in situ with synthetic enamal paint by spraying incl filling cavities with filler, one coat after cleaning all dust etc all as specified and as directed.

Disconnecting electric connection and Taking down DBs, SPN/TPN of any size and making good/levelling the disturbed surfaces of wall by using cement mortar.

M&L for making opening for fixing ventilator fan of size 250 mm sweep complete.

M&L for concealed/surface Point wiring complete with 1.5 sqmm single core PVC insulted FRLS cable 1100 volts grade multistranded copper conductor drawn through in and including 20mm dia PVC rigid non metallic conduit with all accessories such as internal bend, end caps etc complete concealed in walls/ceiling/roof/etc including 1.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade with multistranded copper conductor cable as earth continuity conductor including fabricated branded modular metal flush box concealed in walls with suitable modular plate with cover with suitable screws for housing switches, socket outlets, fan regulators etc , all as specified and as directed for the following :-

One light / fan point controlled by one, one way switch

One switch socket outlet point 5 Amps on independent board.

One switch socket outlet point 5 Amps on same board.

All as per item No.71 described here-in-before but with copper conductor cable FRLS, 2.5 Sqmm for one 3 pin socket outlet, 15 Amps and including 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board. Note for item No. 71 & 72 : Cutting chases and making good in wall / floor will be measured and paid separately.

Supply & fix TARA-M/20W , LED tube light fitting 1x20 Watt MS white powder coated decorative LED T8 batten with PC tube complete. Make: C&S Cat No. LTDC0161820WLED + LT4F20WLEDT8/WD or equivelent in Havells, Philips.

Supply & fix LED mirror light 10 watt, complete. Make: Luker Cat No. LMR10 or equivalent in Havells, philips , C&S.

Supply & fix surface mounting LED light fitting 4 ft, 1x18 watt retrofit batten and including 1x18 watt 4 ft retrofit PC tube complete with making connection by using twin core flexible twisted copper wire from ceiling rose to light fitting complete. Make: LUKER Cat No. of batten - LLTB and Cat No. of tube - LT1818T or equivelent in Havells, Philips, C&S.

Supply & fix LED light fitting suitable for mounting with false ceiling cut out 570mm x 570 mm, 36/40 watt board panel 2 ft x 2 ft complete with connection by using connector and twin core flexible twisted copper wire from connector to light fitting complete. Make: LUKER Cat No. LKM2240 or equivelent in Havells, Philips, C&S.

Supply & fix Ventilator fan 250 mm sweepplastic body white colour complete with louvrs, single phase 230 volts, 50 Hz complete. Make: Crompton greaves, model No. Ventilus 10" or equivelent in Havells, Bajaj.

M&L for concealed Sub main wiring by making receess in wall/surface complete with 2 runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories concealed in wall/Ceiling etc including making recess and making good the disturbed surfaces to match with existing surfaces all as specified and as directed by engr - in- charge. Note :- 2 runs of 6 sqmm, 1 run of 6 sqmm (Earth Cotinuity conductor) and 1 run of PVC conduit shall be measured as one unit length

M&L for concealed Sub main wiring by making receess in wall/surface complete with 2 runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories concealed in wall/Ceiling etc including making recess and making good the disturbed surfaces to match with existing surfaces all as specified and as directed by engr - in- charge. Note :- 2 runs of 4 sqmm, 1 run of 4 sqmm (Earth Cotinuity conductor) and 1 run of PVC conduit shall be measured as one unit length

Supply and fix sheet metal enclosure with distribution board vertical (DB) VTPN, 415 volts, having IP:43 protection, isolated neutral bar, insulated busbar assembly, door earthing arrangement, mechanical impact strength IK08, 04 way double door suitable for fixing 4 pole MCCB upto 125 Amps, frame F1 as incommer and MCBs SP as out going complet, fixed on wall and connecting with all electric connections/circuit complete all as directed by Engineer in charge. Make: Indoasian Cat No. 811888 or equivelent in Havells, Standard.

Supply and fix 4 pole MCCB 100 A, frame F1, 50 Hz, 415 Volts with rupturing capacity 25 KA complete all as specified and directed. Make: Indoasian Cat No. 830052 or equivelent in Havells, Standard.

Supply and fix MCB DB, SPN, 8 ways, Isolated neutral bar with double door, IP54 protection, door earthing arrangement with cement spill protector, mechanical impact strength IK09 complete. Make: Indoasian Cat No. 811826 or equivelent in Havells , Standard.

Supply and fix MCB SP 63 Amps, 240Volts, 10 KA, "B" Curve complete. Make: Indoasian Cat No. 811018 or equivelent in Havells/Standard ( As out going from DB TPN having 100/125 Amps MCCB).

Supply and fix MCB SPN 40 / 63 Amps, 240Volts, 10 KA, "B" Curve complete. Make: Indoasian Cat No. 811036 or equivelent in Havells/Standard

Supply and fix MCB SP 6 to 32 Amps, 240Volts, 10 KA, "B" Curve complete. Make: Indoasian or equivelent in Havells/Standard

Supply and fix ceiling rose surface type bakelite 65 x 50mm with three terminals.

S&F Modular fan regulator step type 120 W, 2 module complete all as specified and as directed.

S&F Switch Modular 6A single pole, one way, 1 module complete all as specified and as directed.

S&F Switch Modular 16A single pole, one way, 1 module complete all as specified and as directed.

S&F Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed.

S&F Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed.

Supply, installation and testing LT feeder pillar box of size not less than 75 cm x 60 cm x 45 cm made out of 3.15 mm thick CRCA sheet for outer panel and 1.6 mm thick for internal compartment with frame made of 50x50 mm angle iron and 4 nos mounting legs not less than 45 cm long, & necessary arrangement for earth connections, powder coated painted totally enclosed front and rear opening, dust and vermin proof , having seperate compartment for housing MCCB and busbars, with and including suitable size plate form for installation of feeder pillar, grouted in PCC plate form and making connection complete, the feeder pilllar comprises the followings :- Incommer:- (a) MCCB 250 Amps, F2 frame, 4 pole, 25 KA, 415 Volts, 50 Hz = 01 No. as incommer. Out going: - (a) Aluminium busbar of 400 Amps with coloured sleaves ( Red, Yellow, Blue & Black) - 01 St of 4 bus bars suitable for 4 nos out going cables.

M & L Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 M below ground level, earth plate surrounded by 15cm thick and packed with layers of charcoal dust and common salt , earth lead GI wire 4mm dia ( 8 SWG) connectd to GI earth plate elcectrode by means of bolts, nuts, check nuts, washers of galvanised iron, thimbles and other end of earth wire connected to main switch board and protected by galvanised iron pipe medium grade 15mm bore and 20mm bore medium grade GI pipe with funnel and wire mesh for watering including necessary excavation and earth works. PCC Chamber in cement concrete 1:3:6 type C-2 & RCC cover in M-20 (Design mix ) and all as shown in Electrical Plate No. 3 of SSR ( Part-I) of 2009. (i) The unit rate includes earthing wire, and protection pipe upto 7.5 metre.

S&F Single pole and neutral enclosure, 240 volts with a two pin and earth plug and socket complete with one single pole MCB 20 Amps. Make: Indoasian, havells, standard.

S&F XLPE insulated , armoured , heavy duty electric cable with aluminium conductor , 1100 volts grade , cross sectional area 35 sqmm 3.5 core complete fixed on wall surface by using necessary clamps/ saddales, nuts, bolts, washers etc complete all as specified and directed.

Cutting chases/recess, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth

SEMBA ELECTRICALS

KUMAR AGENCIES

TECKXPERT ENTERPRISES

GMS Builders

p.chinnasamy