Renovation of TEC Building including provision of toilets, rooms and other misc. work at AMRPI, Bhopal Phase I

Amount

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm)

Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.Two or more coats

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge.

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm).

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: Asbestos cement sheet

Labour for Cleaning of floors, glass, door window, shifting of items and misclanious etc etc. (Beldar DSR-2021-0114)

P/f aluminium partition in aluminium section medium gauge with 4mm glass / 12mm board ISI marked including fitting with clip, rubber as required with screws, handles, door stopper hinges, L-drop etc all fittings and fixtures as required and desired by E-in-C. (Old aluminium section/glass/board as per availability will be used contractor are requested to visit site to access quantity).

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer for door weight upto 36 kg to 80 kg and door width from 701 mm to 1100 mm, with speed adjustment with necessary accessories and screws etc. complete.

P/f false ceiling 600X600 mm Size i by fixing aluminium section including T-section and fixing Aluminium section powder coated medium gauge by suspending roof by suitable means, clips etc. Including supporting aluminium section as per site requirement as required and desired by E-in-C

Providing and fixing 1 mm thick sheet flooring on floor with suitable adhesive

Hiring of Tractor with trolly for shifting of materials with diesel fuel and driver complete

Providing and fixing on roof TURBO Vent 600 dia with all accessories, fittings etc complete as per direction of E-in-C

Injecting chemical for control of termite by anti- termite treatment by suitable chemicals as per manufacturer specifications including the cost of chemical emulsion along wall and floor using chemical emulsion of the vertical/ horizontal surface as per the site requirement and instruction of E-in-C In wall,floor, foundation, side , roof sides and plinth beam corner.

Painting One or more coats on pipes and fittings in trusses with oil paint of approved brand and manufacture on pipes of dia 15mm to 25mm and span of pipe 20meter at bottom and wall height above 5meter upto 10meter ( contractor are requested to visit site to access site condition)

Painting One or more coats on pipes and fittings in purlin and wind ties with oil paint of approved brand and manufacture on pipes of dia 15mm to 25mm and span of pipe 40 meter at bottom and wall height above 5meter upto 10meter ( contractor are requested to visit site to access site condition)

S N ASSOCIATES (BID ID -800039)

MAITRI ENTERPRISES (BID ID -800058)

Ashish contracor and supplier (BID ID -798668)

IRFAN AHMAD (BID ID -800160)