Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.5 LAccepted-Finance | ₹3.5 L | L1 | Accepted-Finance Lowest Amount Quoted BY YOU |
| 2 | L2₹4.0 L+₹50,037.80 (14.5%)Rejected-Finance | ₹4.0 L+₹50,037.80 (14.5%) | L2 | Rejected-Finance Lowest Amount Quoted BY Shanshah Alam |
| 3 | L3₹4.0 L+₹55,806.40 (16.2%)Rejected-Finance D6 LHS PLOT NO 44 3RD FLOOR SHASTRI PARK NEAR SAMUDAIK BHAWAN NEW DELHI 110053 | NORTH EAST | DELHI | 110053 | ₹4.0 L+₹55,806.40 (16.2%) | L3 | Rejected-Finance Lowest Amount Quoted BY Shanshah Alam |
| 4 | L4₹4.7 L+₹1.2 L (35.3%)Rejected-Finance | ₹4.7 L+₹1.2 L (35.3%) | L4 | Rejected-Finance Lowest Amount Quoted BY Shanshah Alam |
| 5 | L5₹4.7 L+₹1.2 L (35.8%)Rejected-Finance | ₹4.7 L+₹1.2 L (35.8%) | L5 | Rejected-Finance Lowest Amount Quoted BY Shanshah Alam |
Tender Value
₹6.5 L
EMD Value
₹12,963
Closing Date
11 Aug 2026, 3:00 pmClosed
EXECUTIVE ENGINEER
Karkardooma Court Division PWD 110091
E.O.R. to Sanskar Ashram, Dilshad Garden, Delhi. (SH Fixing of retro reflective signage boards at Nehru Boys Hostel and Kamla Nehru Girls Hostel Campus under jurisdiction of sub division M-2312, PWD Delhi).
2026_PWD_296421_1
30/EE/KKD Court Divn./PWD/NIT/2026-27
Open Tender
Civil Works - Buildings
Percentage
30 days
SANSKAR ASHRAM DILSHAD GARDEN
Please refer Tender documents.
12 documents required · 12 mandatory
₹0
₹12,963
12 Aug 2026
4 Aug 2026
11 Aug 2026
4 Aug 2026
11 Aug 2026
4 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed to dumping ground notified by MCD Delhi within any lead. | |||||
| 1.1 | All kinds of soil. | 2 | cum | 263.48 | ₹526.96 |
| 2Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: | |||||
| 2.1 | 1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 2 | cum | 7,974.71 | ₹15,949.42 |
| 3 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 178 | kg | 135.33 | ₹24,088.74 |
| 4 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, bufing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | 235 | kg | 781.83 | ₹1,83,730.05 |
| 5Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge. (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). | |||||
| 5.1 | Overhead informatory road signage | 20 | sqm | 5,951.7 | ₹1,19,034 |
| 6 | Providing, installing and fixing with necessary clamps etc. retro-reflective double sided road name/ place identification signboards comprising of customized modular PU Epoxy coated MS tube, frame work, aluminum composite panel (ACP) , digitally printed micro prismatic retro-reflective sheet signages with QR Codes. (i) The horizontal and vertical members of the MS frame module shall be made of MS tube 80x40x4mm thick as per approved drawing and each panel shall be braced diagonally (one way only) with same section. (ii) The aluminum composite panel (ACP) shall have thickness of 4mm consisting of 3mm thick Non FR grade thermoplastic core of LDPE/HDPE sandwiched between two 0.50 Aluminum sheets. The ACP Sheet shall be coil coated with kynor 500 base PVDF on one face and another face will be mill finish for pasting retro reflective sheet. The ACP shall be routed, folded and fixed on the MS frame with VHB tape, 24mm wide and 2.3mm thick of approved brand & made provided throughout the length and breadth of the frame including riveting at the right angle face of the frame with pop riveting or with self taping SS screws 5mm dia spaced not more than 300mm center to center on both side of frame ensuring that no riveting is seen on either face of the frame. (iii) On the front face of the ACP, micro prismatic retro reflective sheet conforming to Type-XI of IRC 67-2022 and ASTM:D4956-17 with digitally printed signs on top of the base retro reflective sheeting covering the entire sign facia (end to end) shall be pressure fixed. The sign shall be manufactured using a system of matched components of reflective sheeting and overlay films and digital inks manufacuted and supplied by the reflective sheeting manufacturer. The digital printer and digital ink shall be approved by the reflective sheeting manufacture. Digitally printed traffic colour (which ever required) areas on white sheeting shall not be having less than 70 percent of the value of the coefficient of retro reflective established for its colour and type of sheeting. (iv) The rear side of the MS frame shall be covered with balancing ACP sheet of the same description as mentioned above and shall be fixed in similar manner as described above. The edges of the board shall be covered alround with 50 micron powder coated die cast extruded aluminum channel of required color and shade of size 68x12x2mm. The channel shall be fixed using two rows of double sided VHB tape of above description. The channel shall further be secured by pop riviets having SS screws of 5mm dia at junctions and corners. (v) Labes/QR Code to be printed on signage at bottom right side corner (2”x2”) with details like name of manufacture, date of manufacturing, code of reflective sheeting used, warranty etc.
Note: The rate shall include all materials, labour, equipments, fabrication transportation, erection, installation and incidentals all complete as per direction of Engineer-in-Charge. Only front area of the board shall be measured for payment. | 14.5 | sqm | 21,022.7 | ₹3,04,829.15 |
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 7.77 MB
BOQ_394566.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .