Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹19.2 LAccepted-AOC | ₹19.2 L | L-1 | Accepted-AOC L-1 |
| 2 | L-2₹19.3 L+₹14,230.80 (0.74%)Rejected-Finance | ₹19.3 L+₹14,230.80 (0.74%) | L-2 | Rejected-Finance L-2 |
| 3 | L-3₹20.0 L+₹84,747.60 (4.42%)Rejected-Finance AT PO LOHANDIA BAZAR DIST GODDA JHARKHAN 814165 | GODDA | GODDA | JHARKHAND | 814165 | ₹20.0 L+₹84,747.60 (4.42%) | L-3 | Rejected-Finance L-3 |
| Sl No | Description | Qty | Unit | M/s D.P. Construction L1 | M/S SANDHYA CONSTRUCTION L3 | M/S AGRASEN BROTHERS L2 |
|---|---|---|---|---|---|---|
| 1.00Item Description/ Heading | ||||||
| 2.00 | Development of tube well in accordance with IS: 2800 (part I) and IS: 11189 to establish maximum rate of usable water yield with out sand content (beyond premissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method measuring static level & draw down etc. by step draw down method, collecting water sampless & getting tested in approved laboratory, I/C disinfection of tubewell all complete, including hire & labour charges of air compressor, tools & accessories etc. all as per requirement and direction of Engineer-in-charge. | 36 | hour | 942 ₹33,912 Lowest | 958 ₹34,488 | 950 ₹34,200 |
| 3.00 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe, removable as per requirement, all complete for borewell of: 200mm dia | 6 | Each | 261 ₹1,566 Lowest | 275 ₹1,650 | 263.5 ₹1,581 |
| 4.00 | Supplying of Nylon rope 20 mm dia. | 570 | Metre | 62 ₹35,340 Lowest | 72 ₹41,040 | 62.5 ₹35,625 |
| 5.00 | Supplying G.I pipes 50 mm dia nominal dia including fittings. | 720 | Metre | 485 ₹3,49,200 Lowest | 500 ₹3,60,000 | 489 ₹3,52,080 |
| 6.00 | Lowering and commissioning of 5.0 HP Submersible pump in deep borewell with GI/ CPVC/PVC pipe including all accessories etc. complete inlcuding cost of labour but excluding cost of material and fittings (cost of pump, cable, PVC Pipe, Contol panel, hanging arrangement like wire/rope to be paid separately) | 6 | job | 3,062 ₹18,372 Lowest | 3,208 ₹19,248 | 3,100 ₹18,600 |
| 7.00 | Supplying of 5.0 HP Submersible pump motor set (three phase 415 volt, 12 stage, speed of pump-2880 rpm) with Glass Noryl Polypropin impeller, stainless steel pump shaft, head-110 metre, discharge-2.5 litres per second. Suction casing-cast iron and of approved make as per direction of EIC. | 6 | Each | 57,354 ₹3,44,124 Lowest | 60,000 ₹3,60,000 | 58,000 ₹3,48,000 |
| 8.00 | Supplying of PVC insulated and PVC sheathed flat submersible cable with copper conductor, 3 core 10 sq.mm as per direction of EIC. | 840 | Metre | 352 ₹2,95,680 Lowest | 380 ₹3,19,200 | 354.5 ₹2,97,780 |
| 9.00 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.External work: 50 mm dia nominal bore | 900 | Metre | 585 ₹5,26,500 Lowest | 600 ₹5,40,000 | 586 ₹5,27,400 |
| 10.00 | Providing and fixing gun metal gate valve 50mm. | 24 | Each | 813 ₹19,512 Lowest | 850 ₹20,400 | 875 ₹21,000 |
Tender Value
₹17.9 L
EMD Value
₹22,400
Closing Date
20 Mar 2026, 6:55 pmClosed
AE(C), RJML AREA
AREA OFFICE RAJMAHAL AREA, DHANKUNDA
Drilling and repairing of 06 nos. bore well all complete fitting at Dakaita rehab site under Rajmahal Area.
2026_ECL_356237_1
ECL/RJML/AGM/AE(C)/ e-Ten/25-26/628 Dt-10.03.2026
Open Tender
Water Supply/ Sanitation Works
Item Rate
30 days
Dakaita rehab site
Please refer Tender documents.
3 documents required · 3 mandatory
₹22,400
3 Jun 2026
10 Mar 2026
21 Mar 2026
10 Mar 2026
20 Mar 2026
10 Mar 2026
10 Mar 2026 - 13 Mar 2026
Item Description/ Heading
Development of tube well in accordance with IS: 2800 (part I) and IS: 11189 to establish maximum rate of usable water yield with out sand content (beyond premissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method measuring static level & draw down etc. by step draw down method, collecting water sampless & getting tested in approved laboratory, I/C disinfection of tubewell all complete, including hire & labour charges of air compressor, tools & accessories etc. all as per requirement and direction of Engineer-in-charge.
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe, removable as per requirement, all complete for borewell of: 200mm dia
Supplying of Nylon rope 20 mm dia.
Supplying G.I pipes 50 mm dia nominal dia including fittings.
Lowering and commissioning of 5.0 HP Submersible pump in deep borewell with GI/ CPVC/PVC pipe including all accessories etc. complete inlcuding cost of labour but excluding cost of material and fittings (cost of pump, cable, PVC Pipe, Contol panel, hanging arrangement like wire/rope to be paid separately)
Supplying of 5.0 HP Submersible pump motor set (three phase 415 volt, 12 stage, speed of pump-2880 rpm) with Glass Noryl Polypropin impeller, stainless steel pump shaft, head-110 metre, discharge-2.5 litres per second. Suction casing-cast iron and of approved make as per direction of EIC.
Supplying of PVC insulated and PVC sheathed flat submersible cable with copper conductor, 3 core 10 sq.mm as per direction of EIC.
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.External work: 50 mm dia nominal bore
Providing and fixing gun metal gate valve 50mm.
Total impact of GST for the purpose of CTC
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_369084.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Tendernotice_1.pdf
PDF • 2.10 MB
Tendernotice_2.pdf
PDF • 1.37 MB
BOQ_369084.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .