Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.5 LAccepted-AOC ROOM NO 997 GALI NO 3 PART NO 3 GANESH MURTHY NAGAR CUFFE PARADE COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹29.9 L+₹4.5 L (17.7%)Rejected-Finance FLAT NO 002 MAHAVIR VILLA CHS LTD PLOT NO 259 SECTOR 21 NERUL EAST NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L2 | Rejected-Finance Being other than lowest | |
| 3 | L3₹30.0 L+₹4.6 L (18.1%)Rejected-Finance | L3 | Rejected-Finance Being other than lowest | |
| 4 | L4₹30.2 L+₹4.8 L (19.1%)Rejected-Finance 46 HUSENI LAKDA BAZAAR 242 BELLASIS ROAD MUMBAI 400008 | MUMBAI | MAHARASHTRA | 400008 | L4 | Rejected-Finance Being other than lowest | |
| 5 | L5₹30.7 L+₹5.3 L (20.7%)Rejected-Finance ROOM NO D 290 PART III GALI NO 8 SHREE GANESH MURTHI NAGAR CUFFE PARADE ROAD COLABA MUMBAI 400005 | MUMBAI | MAHARASHTRA | 400005 | L5 | Rejected-Finance Being other than lowest |
Tender Value
Refer Docs
EMD Value
₹90,000
Closing Date
12 Oct 2021, 3:00 pmClosed
GE (NW) Navy Nagar, Colaba, Mumbai
GE NW NAVY NAGAR COLABA MUMBAI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI
REPAIR TO INTERLOCKING PAVER BLOCKS REPAIR TO FENCING GATE COMPOUND WALL DRAIN COVERS GRATING JOINERY WATER PROOFING TREATMENT AT RASHI COMPLEX UNDER AGE BR II UNDER GE NW NAVY NAGAR COLABA MUMBAI
2021_MES_474929_1
8147/E8
Open Tender
Civil Works
Item Rate
270 days
GE (NW) Navy Nagar, Colaba
Class D and Category a(i)
8 documents required · 8 mandatory
₹500
GE NW NAVY NAGAR COLABA MUMBAI
₹90,000
Yes
9 Nov 2021
14 Sept 2021
13 Oct 2021
14 Sept 2021
12 Oct 2021
28 Sept 2021
14 Sept 2021 - 4 Oct 2021
Amount
Demoliton of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and as directed by Engineer-in-Charge
Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar
M&L 75 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base complete all as specified and directed
M & L Factory Made machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade including minimum 25 mm thick sand cushioning complete all as specified and directed.
M & L Precast chequered cement concrete tiles 30cm x 30cm x 22 to 25 mm thick with grey cement and pigment set, jointed in neat cement slurry and pointed in coloured pigment to match the surface including 15 mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 complete all as specified and directed
M&L for plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in copping, road side interlocking ,stops including necessary formwork complete all as specified and directed.
M&L broken stone or boulders of hard core n exc 63 mm deposited, spreaded and levelled in layers n exc 15 cm thick, watered and rammed to a true surface.
M/L 100 mm thick P.C.C 1:4:8 type D-2 using 40 mm graded stone aggegate as in sub base complete all as specified and directed
M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggegate as in floor, finished the surface even and smooth without using extra cement and spike rolling to surfaces or making impressions of expanded metal whilst the concrete is green all as directed .
Material and labour, forming construction joints of width 10mm & depth 25mm, in cement concrete 100mm thick, priming the surface with primer and filling sealing compound Grade ‘A’ (upto 2mm to 3mm below the top surface of pavement/ hardstanding), including use & waste necessary form work, complete all as specified & directed.
Material and labour, forming contraction joints (dummy joints) of width 10mm & depth 35mm, in cement concrete 100mm thick, priming the surface with primer and filling sealing compound Grade ‘A’ (upto 2mm to 3mm below the top surface of pavement/ hardstanding), including use & waste necessary form work, complete all as specified & directed.
Dismantiling of Asbestos cement (Corrugated, semicorrugated, etc.)sheets in roof covering complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws as specified.
Dismantling mild steel work as in angles, tubular ,brackets of vally gutter of any description and in any position.
M&L and fabrication of mild steel work as in posts,purlins,crane gantries, rafter ,rails,wind tie nut & bolt etc and fastenings etc and heavy brackets framing (MS tube, beam,tee,angle,channels,flat section etc and other sections) including distance pieces,cleats etc complete all as specified and directed .
M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer all as specified and as directed.
Taking down PVC rain water pipes including all fittings like shoes bends swan necks etc of any dia all as specified and directed. Note: Work shall be carried out upto G+14 storey bldg incl lift wells. Rate incl scaffolding & Safety Net Cloth at places.
S & F PVC (SWR) pipes 150mm bore single socketed in any length with rubber ring joints fixed to walls.
S & F PVC (SWR) bends 150mm bore any radius
S & F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls.
S & F PVC (SWR) bends 110mm bore any radius
Cutting out natural vegetation plants grown up on wall or roof including roots in any depth and in any position and making good the damaged portion of wall and roof by PCC 1:2:4 or CM 1:4 to match with the existing surface of roof and wall complete all as specified and directed by Engr-in-Charge. Note :- Work to be carried out above 14th floor incl Lift wells
Demolition of existing treatment of any type and preparing the surface by cleaning the concrete surface with wire brush and high pressure water jet and ensure that it is free of dust, oil, grease, loose particles vegetation roots etc. Note :- Work to be carried out above 14th floor incl Lift wells
M & L for Plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) mixed with liquid water proofing compound and 1:30 slope to be mainted complete all as specified and as directed. Note :- Work to be carried out above 14th floor incl Lift wells
M&L for 10mm thick rendering in CM 1:3 with mixed with liquid water proofing compound on fair faces of brick work or on concrete surfaces all as directed by Engr-In-Charge(Note: Cost of liquid waterproofing compound shall be included in this rate). Note :- Work to be carried out above 14th floor incl Lift wells
M&L for protecting the roof including parapet wall with water proofing coating ,complete as specified below: (a) Minor cleaning work, Removal of loose concrete and filling cracks with polymer modified mortar using Smart Care RP or Epoxy Mortar (b) Supplying & applying High performance polyurea Polyurethane elastomeric waterproofing coating cold applied of spray/brush applied, smart Care Ultron liquid membrance with an elongation of 600% and tensile strength of 12.6 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm as per ASTM C1305, shore A Hardness of min 75 as per ASTM D 2240. The system includes final base preparation, epoxy primer application and applying Smart Care Ultron or approved equivalent in two coats at 1.2 Kg per Sqm etc complete as per Manufacturer specifications. Make : Asian Paints/Berger paints/Dulux paints/STP/Dr. Fixit Note : 1) Work to be carried out from authorised applicator only. 2) Work to be carried out above 14th floor incl Lift Wells. 3) Colour of each coat shall be as directed.
Taking down and refixing GI pipe of any size from inlet and outlet of water tank fixed at roof top
Removing demolished materials outside MD land to a distance exc 5Km but n exc 20Km. Note :- For item No 1 to 14, work to be carried out above 14th floor and scaffolding/safetynet considered in schedule items.
Dismantling of fencing wire mesh any type
S&F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)
S&F barbed razor type concertina coil hot galvanised spring tensile wire fixed on existing or new 'Y' shape angle post, coil of 8 to 10 RM per coil of 610mm dia, minium weight of coil shall be 13.25 Kg/Coil etc all as specified
Dismantling posts or struts (wood,steel or RCC) any section,in natural ground including taking out embedded portion and making good distrubed ground complete all as specified and directed
Excavation in post holes in soft loose soil (or similar holes ) each n.exc 0.50 cum,getting out,returning,filling in and ramming earth or broken rubble and removing surplus soil all as specified and directed
Plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundation filling mass concrete all as specified and directed
S&F mild steel work as in angle iron post and struts in fencing including cutting tops to shape as directed,drilling holes,notching for wire etc flat iron fillets ( for securing wire mesh etc) including all necessary drilling,bolting or riveting and welding to existing boundary wall fencing post and other similar location etc complete all as specified and directed
M&L 12 mm dia for mild steel screw bolts (machine made) with hexagonal or square heads at one end and nut and bolts n. exc 5 cm long all as specified and directed
Supply only hot dipped galvanised mild steel PVC Coated chain link of Size 100mmx100mm, made of 4.0mm dia GI wire, including line wires, or any other approved mesh of any size and dia of GI wire complete all as specified and directed.
Fixing only hot dipped galvanised PVC Coated chain link fencing including line wires,any mesh size and type to any type of standards,rails,straining bolts etc including provision of binding wire all as specified and directed
S&F 10 mm dia mild steel round bars as line wire in chain link fencing with two coat of synthetic paint over a coat of red oxide primer before placing in position complete all as specified and directed
Taking down chowkats with shutter (without taking off shutter from the frame) exc 1.5 sqm but n exc 4 sqm each
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290.Gde-E-165
Mild steel plates chequered, 5 mm thick or over square cut or notched (ordinary or counter sunk forming holes ) without any attachment etc. in ducts complete all as specified and directed.
M&L for Cement concrete 1:2:4 type B-1 ( 20 mm graded crushed stone aggregate) copings, kneelers, apex stones, hold fast bed plates formwork including making good the distrubed surface same as existing surface all as specified and directed.
M&L 300mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate
S&F mild steel butt hinges100 mm size,medium weight , cold rolled all as specified and directed
RAJENDRA CONSTRUCTION
sri ram construction
Unitech Enterprises
DHARICHHAN ENTERPRISE
Mayur Enterprises
BOB ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .