Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.5 LAccepted-Finance | ₹9.5 L | L1 | Accepted-Finance Responsive |
| 2 | L2₹9.7 LAccepted-Finance | ₹9.7 L | L2 | Accepted-Finance Responsive |
Tender Value
₹12.3 L
EMD Value
₹24,620
Closing Date
29 Dec 2025, 6:55 pmClosed
Executive Engineer
Shalimar
Providing, Installation of 300 mm Dia Machine Bore Well With 200 mm Casing Tube Well 45 Mtr Depth and Submersible Motor Under Promotion of Oil Seeds (HADP) at MRCFC Khudwani-Kulgam, SKUAST-K.
2025_SKUST_298880_1
E-NIT-78 of 2025-26
Open Tender
Drilling Works
30 days
MRCFC Khudwani SKUAST-K
Please refer Tender documents.
5 documents required · 5 mandatory
₹500
Assistant comptroller
₹24,620
13 Feb 2026
22 Dec 2025
30 Dec 2025
22 Dec 2025
29 Dec 2025
22 Dec 2025
Transportation of boring equipment to site incl. all sorts of carriage etc for casing pipes , GI pipes , transpormer etc . Complete in all respects.
Drilling of 300 MM dia machine bore bit cost excluding casing pipe 200 MM The well is to be developed using compressed air from an Air Compressor of adequate capacity and pressure rating. As the water becomes clear, surging or backwashing is done to make the development more perfect. The final discharge should be free from sand. The physical chemical analysis of water sample tested has to be as per the specified IS codes. After completion of development the well is tested for its performance that is yield characteristics and efficiency. The water has to be disinfected after completion of test for yield to ensure that the quality of water and as laid down as per specified IS standards. The grouting and sealing of tube well has to be done to ensure safe sanitary conditions .All expenses involved for getting done the Geo-hydrological/Geo-physical ground water investigation survey are to be borne by the contractor.Including successful commissioning of bore well. (Conducting / arranging Geo-hydrological/Geo-physical ground water investigation survey for location of bore well and confirmation by contractor on his own letter head)
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed plain ended casing pipes of 200mm nominal size dia having minimum wall thickness 7.1 mm Heavy Grade marked as H , conforming to IS 4270 of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, as per relavant IS , including required hire & labour charges, fittings & accessories, all complete, for all depths. Note: The pipe shall be of TATA/JINDAL/ESSAR make. The work also inclusive the cost of welding charges and welding rod of approved IS code required for complete execution of the work mentioned in the Item.
Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.The Gravel should be Pea gravel which is used in bore well gravel packing works.Development of bore well with compressor till sand free water is available, including all sorts of labour charges as required at site for completion of bore well.
P/f of 200 mm Shoe
P/f of HP submersible motor 5 hp Stage 4 Make Kirloskar or equivalent . Complete in all respects with pump section etc and . Etc 400 LPM @ 39 Outlet size 65mm KS6DN-0504 Kirloskar or equivalent
Providing of submersible 6 sq mm flat cable copper Havels 3 core
GI pipe B type with flange after every 10 ft length with welding etc with 4 lengths having perforation standard Dia 2.5" / 65 mm with Heavy Make Jindal /Prakash Surya
Bend / elbow GI 80/100 mm complete
Supplying, installation, testing & commissioning of 20 KW copper wound voltage stabilizer with following specification: 1. No. of input phases : Three 2. Frequency : 50HZ ± 3% 3. Capacity : 20 KVA fitted with Voltmeter 0-50 (2-Nos) AE make with roter switch, RYB indication primary and secondary brass terminals with oil 4. Input voltage: 90--200 5. Output: 220—200 PN, 400-440V P-P 6. Oil Immersed with oil topping complete Make Chinar /Equivalent
MCCB 63 A Make 4 pole 36 KA Hager /Legrand
S/I of Changeover , Panel Mounted Standard Make 63 Amp TPN
Supply installation testing and commissioning of star delta starter 7.5 H P range with features as below: MUG 15 S Heavy duty or equivalent 1. Fully - Automatic type 3. Under voltage protection 4. Thermal overload protection 5. Single phase preventor protection Kilburn/Equivalent/L&T 8. Overload /under load protection The job includes mounting of starter on underneath panel board Complete with internal and external connections etc, Duly tested on load. MakeBentex / Kilburn / L&T CS9409150VO
Fabrication, supply, installation, testing & commissioning of intdoor type compartmentalized feeder pillar having front area not less than 0.60 Sqmtr 900 mm x 900 mm) and depth 30 Cm (NS) made out of 2mm thick CRCA sheet having separate cable and bus bar alley, 1 door arrangement i/c locking arrangement, having 200 Amp four pole aluminium bus bar of full length with base frame made out of 50mmx50mmx6mm (thick) angle iron having 80cm legs for erection in ground with construction of cement concrete suitable foundation size complete with connections and interconnections with copper conductor PVC insulated cables/ insulated aluminium busbar strips of appropriate size and terminal blocks (on outgoing) including supplying & fixing following switchgears & accessories there in, powder coating, labelling, earthing etc. complete as required. Providing and fixing following accessories in existing cubical panel board i/c making connection etc. as reqd. Providing and fixing following accessories in existing cubical panel board i/c making connection etc. as reqd. with single phase preventer and MCB 100 A 4 Pole = 1 No with high cut and low cut protection.
Cable 6 SQ mm for star to delta connection
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. DSR CODE 7.3.1 for 35 Sq mm
Supply , laying of 1100 V core 3.5 C 35 AYY XLPE 1100V XLPE un-armored cable in ground etc
Earthing with GI earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. With GI strip 25x5 mm etc . Complete in all respects
GI Nuts and bolts of size 80 MM with gas cut washers as required
Flat Iron Clamps of size 80 mm
Threading of GI pipes for delivery section and cutting etc
32 mm PVC conduit
20 mm flexible conduit
Fabrication of Shelter for Stabilizer , Control Panel of size 10x10 ftx 8 ft fabricated in Angle iron 50x50x5 mm with GI roofing etc , Cement concrete Platform above ground 12 inches , complete work in all respects .
Note:-The rates quoted are inclusive of all carriages of materials (Mechanical/Manual) from source to site work and all extra charges including dewatering if any during the execution of work till complete in all respects.
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
finance_969287.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.53 MB
BOQ_969287.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid